Washer shows E71; NTC temperature sensor open or short circuit detected.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open-circuit NTC sensor, Shorted NTC sensor, Broken sensor wiring, Corroded connector

Safety first: Disconnect power before accessing the heater/NTC area.

1. Locate the NTC sensor: Usually mounted in the heater bracket at the bottom of the tub.
2. Inspect connector and wiring: Reseat the plug and check for corrosion or broken wires.
3. Measure NTC resistance: Compare with Toshiba's temperature-resistance chart. Replace the sensor if open, shorted, or out of range.
4. Clear error: After replacement, run a test cycle to confirm the E71 code is cleared.

Medium 3/5

NTC Temperature Sensor

Check Price on Amazon

We may earn a commission from links on this page.