Toshiba
Door Gasket / Bellows Leak
Washer leaks water from the front door area during wash or spin.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Torn door gasket, Debris stuck on gasket, Loose door clamp, Misaligned door
How to Fix / Troubleshooting
Safety first: Unplug the washer and wipe up any spilled water to prevent slipping.
- 1. Inspect door gasket: Open the door and carefully examine the rubber bellows for tears, holes, or deformation, especially at the bottom.
- 2. Clean gasket: Remove coins, hairpins, and lint from the folds. Wipe with mild detergent and water.
- 3. Check clamps: Ensure the inner and outer retaining rings are properly seated and tight around the gasket.
- 4. Replace gasket if damaged: Remove the retaining rings, pull off the old gasket, and install a new Toshiba-compatible door seal, aligning drain holes at the bottom.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Gasket (Bellows)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements