Unit displays Code 61 and fan may not run or runs erratically
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Turn OFF power and gas. Fan blades can be sharp; avoid contact with moving parts.
Steps to check:
- Listen for fan operation: On startup, you should hear the combustion fan. If silent or noisy, suspect a fan issue.
- Inspect fan area: Remove the front cover and visually inspect the fan for debris, insect nests, or damage.
- Check wiring: Ensure the fan motor connector is secure and wiring is intact.
- Reset and test: Restore power and gas and reset the unit.
When to call a professional: Replacement of the combustion fan motor or control board should be done by a qualified technician.
Repair Difficulty
Required Part
We may earn a commission from links on this page.