F2
Beko
Fan Speed / Fan Feedback Error
F2 error and interior fan cycles abnormally or unit struggles to maintain temperature
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Evaporator fan motor speed sensor failure (if brushless), Obstructed fan blades, Loose fan connector, Faulty main PCB fan control
How to Fix / Troubleshooting
Safety: Disconnect power before accessing the fan.
- Access fan: Remove interior rear panel to expose the evaporator fan.
- Check for obstructions: Remove any ice, labels, or wiring that may be contacting the fan blades.
- Inspect wiring: Ensure the multi-wire connector to the fan is fully seated and wires are intact.
- Replace fan: If the fan does not run smoothly or the speed sensor feedback is faulty, replace the fan motor with the correct Beko part.
- Control board: If a new fan does not resolve F2, the main PCB fan driver circuit may be defective and require replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Evaporator Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements