Beko Wine Coolers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
CF
CF error code and compressor does not run, or runs only briefly
Compressor Failure / Current Fault Detection
dE
dE or door icon flashing and unit beeps, interior light may stay on
Door Open / Door Switch Fault
E0
Display shows E0 and cabinet is not cooling or cooling erratically
Cabinet Temperature Sensor (NTC) Failure
E1
E1 error on display and unit runs continuously or does not reach set temperature
Evaporator Temperature Sensor (NTC) Failure
E2
E2 error code and compressor does not start or cycles rapidly
Ambient Temperature Sensor (NTC) Failure
E3
E3 error code and interior fan does not run or runs erratically
Evaporator Fan Motor or Fan Feedback Fault
E4
E4 error code and heavy ice buildup on evaporator or poor cooling
Defrost Sensor or Defrost Circuit Failure
E5
E5 error code and compressor does not start or stops shortly after starting
Compressor Start/Overload Protection Fault
E6
E6 error code and interior lights or display behave erratically
User Interface / Display Communication Fault
E7
E7 error code and unit does not respond to temperature changes or buttons
Keypad / Touch Control Fault
E8
E8 error code and cabinet temperature fluctuates widely or shows unrealistic values
Dual-Zone Temperature Synchronization / Sensor Mismatch Fault
E9
E9 error code and compressor runs continuously or not at all, with abnormal temperature display
EEPROM / Control Board Configuration Error
Er
Er or generic error on display, unit may be locked or unresponsive
General Control System Error
F1
F1 error and compressor/fan stop, unit may not cool
High Condenser Temperature / Condenser Overheat Fault
F2
F2 error and interior fan cycles abnormally or unit struggles to maintain temperature
Fan Speed / Fan Feedback Error
H1
H1 or HI error and temperature display shows very high value, cabinet feels warm
High Temperature Alarm Condition
L1
L1 or LO error and temperature display shows very low value, bottles feel too cold or partially frozen
Low Temperature Alarm / Overcooling
Symptom
Beeping alarm with no visible error code, often when door appears closed
Door Ajar Detection or Temperature Alarm
Symptom
Clicking sound every few minutes, compressor attempts to start but stops
Compressor Start Failure
Symptom
Display is blank, no lights, unit does not power on
No Power / Main Supply Failure
Symptom
Display works but compressor and fan do not start (unit stays warm)
Control Output / Relay Failure
Symptom
Door will not close properly or pops open slightly after closing
Door Alignment or Gasket Deformation
Symptom
Excessive condensation on the glass door
Door Seal or Ambient Humidity Issue
Symptom
Excessive frost or ice buildup on the back wall or evaporator area
Defrost System Failure or Air Infiltration
Symptom
High-pitched whine or squeal from inside the cabinet
Evaporator Fan Bearing Wear
Symptom
Interior light not working but cooler otherwise operates normally
LED Lighting Circuit Failure
Symptom
Interior light stays on even when door is closed
Door Switch Stuck Closed
Symptom
Loud humming or buzzing noise from the rear of the wine cooler
Compressor or Condenser Fan Noise
Symptom
Lower zone cools but upper zone warm (dual-zone model)
Upper Zone Airflow or Sensor Failure
Symptom
Musty or moldy odor inside the wine cooler
Microbial Growth on Interior Surfaces and Drain
Symptom
Rattling or clanking noise when compressor starts or stops
Loose Components or Refrigerant Line Vibration
Symptom
Shelves difficult to slide or scraping against cabinet walls
Shelf Rail Misalignment or Deformation
Symptom
Strong chemical or burning smell from the rear of the unit
Electrical Overheating or Component Burnout
Symptom
Temperature display does not match actual bottle temperature
Temperature Calibration or Sensor Placement Issue
Symptom
Unit vibrates excessively and transmits noise to surrounding cabinets
Installation / Leveling Issue
Symptom
Upper zone cools but lower zone warm (dual-zone model)
Lower Zone Cooling Circuit or Airflow Failure
Symptom
Water pooling at the bottom of the cabinet or on the floor in front of the cooler
Condensate Drain Blockage or Leak
Symptom
Wine cooler cools too much, wine is too cold or freezing even at higher setpoint
Thermostat / Temperature Control Failure
Symptom
Wine cooler not cooling at all, interior light works but temperature does not drop
Compressor or Sealed System Failure
Symptom
Wine cooler runs continuously and never reaches set temperature
Insufficient Cooling Capacity or Refrigerant Loss
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| CF |
CF error code and compressor does not run, or runs only briefly
|
Compressor Failure / Current Fault Detection | View Details |
| dE |
dE or door icon flashing and unit beeps, interior light may stay on
|
Door Open / Door Switch Fault | View Details |
| E0 |
Display shows E0 and cabinet is not cooling or cooling erratically
|
Cabinet Temperature Sensor (NTC) Failure | View Details |
| E1 |
E1 error on display and unit runs continuously or does not reach set temperature
|
Evaporator Temperature Sensor (NTC) Failure | View Details |
| E2 |
E2 error code and compressor does not start or cycles rapidly
|
Ambient Temperature Sensor (NTC) Failure | View Details |
| E3 |
E3 error code and interior fan does not run or runs erratically
|
Evaporator Fan Motor or Fan Feedback Fault | View Details |
| E4 |
E4 error code and heavy ice buildup on evaporator or poor cooling
|
Defrost Sensor or Defrost Circuit Failure | View Details |
| E5 |
E5 error code and compressor does not start or stops shortly after starting
|
Compressor Start/Overload Protection Fault | View Details |
| E6 |
E6 error code and interior lights or display behave erratically
|
User Interface / Display Communication Fault | View Details |
| E7 |
E7 error code and unit does not respond to temperature changes or buttons
|
Keypad / Touch Control Fault | View Details |
| E8 |
E8 error code and cabinet temperature fluctuates widely or shows unrealistic values
|
Dual-Zone Temperature Synchronization / Sensor Mismatch Fault | View Details |
| E9 |
E9 error code and compressor runs continuously or not at all, with abnormal temperature display
|
EEPROM / Control Board Configuration Error | View Details |
| Er |
Er or generic error on display, unit may be locked or unresponsive
|
General Control System Error | View Details |
| F1 |
F1 error and compressor/fan stop, unit may not cool
|
High Condenser Temperature / Condenser Overheat Fault | View Details |
| F2 |
F2 error and interior fan cycles abnormally or unit struggles to maintain temperature
|
Fan Speed / Fan Feedback Error | View Details |
| H1 |
H1 or HI error and temperature display shows very high value, cabinet feels warm
|
High Temperature Alarm Condition | View Details |
| L1 |
L1 or LO error and temperature display shows very low value, bottles feel too cold or partially frozen
|
Low Temperature Alarm / Overcooling | View Details |
| – |
Beeping alarm with no visible error code, often when door appears closed
|
Door Ajar Detection or Temperature Alarm | View Details |
| – |
Clicking sound every few minutes, compressor attempts to start but stops
|
Compressor Start Failure | View Details |
| – |
Display is blank, no lights, unit does not power on
|
No Power / Main Supply Failure | View Details |
| – |
Display works but compressor and fan do not start (unit stays warm)
|
Control Output / Relay Failure | View Details |
| – |
Door will not close properly or pops open slightly after closing
|
Door Alignment or Gasket Deformation | View Details |
| – |
Excessive condensation on the glass door
|
Door Seal or Ambient Humidity Issue | View Details |
| – |
Excessive frost or ice buildup on the back wall or evaporator area
|
Defrost System Failure or Air Infiltration | View Details |
| – |
High-pitched whine or squeal from inside the cabinet
|
Evaporator Fan Bearing Wear | View Details |
| – |
Interior light not working but cooler otherwise operates normally
|
LED Lighting Circuit Failure | View Details |
| – |
Interior light stays on even when door is closed
|
Door Switch Stuck Closed | View Details |
| – |
Loud humming or buzzing noise from the rear of the wine cooler
|
Compressor or Condenser Fan Noise | View Details |
| – |
Lower zone cools but upper zone warm (dual-zone model)
|
Upper Zone Airflow or Sensor Failure | View Details |
| – |
Musty or moldy odor inside the wine cooler
|
Microbial Growth on Interior Surfaces and Drain | View Details |
| – |
Rattling or clanking noise when compressor starts or stops
|
Loose Components or Refrigerant Line Vibration | View Details |
| – |
Shelves difficult to slide or scraping against cabinet walls
|
Shelf Rail Misalignment or Deformation | View Details |
| – |
Strong chemical or burning smell from the rear of the unit
|
Electrical Overheating or Component Burnout | View Details |
| – |
Temperature display does not match actual bottle temperature
|
Temperature Calibration or Sensor Placement Issue | View Details |
| – |
Unit vibrates excessively and transmits noise to surrounding cabinets
|
Installation / Leveling Issue | View Details |
| – |
Upper zone cools but lower zone warm (dual-zone model)
|
Lower Zone Cooling Circuit or Airflow Failure | View Details |
| – |
Water pooling at the bottom of the cabinet or on the floor in front of the cooler
|
Condensate Drain Blockage or Leak | View Details |
| – |
Wine cooler cools too much, wine is too cold or freezing even at higher setpoint
|
Thermostat / Temperature Control Failure | View Details |
| – |
Wine cooler not cooling at all, interior light works but temperature does not drop
|
Compressor or Sealed System Failure | View Details |
| – |
Wine cooler runs continuously and never reaches set temperature
|
Insufficient Cooling Capacity or Refrigerant Loss | View Details |
No matching codes found
Advertisements