Beko Insufficient Cooling Capacity or Refrigerant Loss

Wine cooler runs continuously and never reaches set temperature

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Dirty condenser coil, Failing condenser fan, Partial refrigerant leak, Weak compressor, Door gasket leaking warm air

How to Fix / Troubleshooting

Safety: Unplug before cleaning or removing panels.

  • Clean condenser: Access the rear and vacuum/brush the condenser coil thoroughly.
  • Check condenser fan: Ensure the fan (if fitted) runs whenever the compressor is on. Replace the fan motor if it does not run or is noisy.
  • Inspect door gasket: Look for gaps or damage. Perform the paper test around the door perimeter and replace the gasket if it does not seal tightly.
  • Check ambient conditions: Ensure the room temperature is within the specified range and the unit has proper ventilation.
  • Professional diagnosis: If the unit still cannot reach temperature, a partial refrigerant loss or weak compressor may be the cause and requires a technician.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Condenser Fan Motor
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements