BODEGA Display Module / Low Voltage to UI

Display is blank or very dim, but the unit still cools.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Failed LED display module, Loose UI harness connector, Faulty low-voltage power supply on main PCB, Cracked display board

How to Fix / Troubleshooting

Safety first: Unplug the unit before removing the control panel.

Steps to diagnose:

  • Check brightness setting: Some models allow dimming the display. Ensure it is not set to the lowest level.
  • Inspect UI connections: Remove the control panel and check the wiring harness or ribbon cable between the main board and display. Reseat connectors.
  • Replace display module: If wiring is intact but the display remains blank, replace the BODEGA display / UI board.

When to call a professional: If a new display does not light, the main control board's low-voltage supply may be faulty and should be replaced by a technician.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Display / User Interface Board
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements