Display shows dE and the unit beeps, indicating a door error even when the door appears closed.

Safety first: Unplug the unit before adjusting door hardware or accessing internal wiring.

Steps to diagnose and fix:

• Check door closure: Ensure the door closes fully and evenly. Look for bottles or shelves preventing full closure.
• Inspect gasket: Examine the door gasket for twists, tears, or debris. Clean the gasket and cabinet mating surface with mild soap and water, then dry.
• Locate door sensor: Many BODEGA models use a magnetic reed switch hidden in the cabinet frame and a magnet in the door. Verify the magnet is present and aligned with the switch area.
• Test switch: If accessible, disconnect the door switch and test for continuity with a multimeter while opening and closing the door. Replace the BODEGA door switch / reed sensor if it does not change state.
• Adjust door alignment: If the door is sagging, adjust the hinges or tighten mounting screws so the magnet aligns correctly with the sensor.

When to call a professional: If dE persists after switch and alignment checks, the main control board input may be faulty and should be inspected by a technician.