BODEGA
Locked or Overheated Compressor
Wine cooler not cooling but interior light and display work; compressor is hot to the touch.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Internal compressor mechanical failure, Overheating due to poor ventilation, Incorrect voltage supply, Failing start components causing repeated starts
How to Fix / Troubleshooting
Safety first: Unplug the unit and allow the compressor to cool before touching. Do not attempt to open the sealed compressor.
Steps to check:
- Improve ventilation: Ensure adequate clearance around the unit and that vents are not blocked.
- Clean condenser: Remove rear panel and clean condenser coil and fan.
- Replace start relay/overload: If the compressor clicks repeatedly but does not start, replace the start relay and overload protector with a compatible BODEGA kit.
- Monitor operation: After replacement, plug in and observe. If the compressor still fails to start or overheats quickly, it is likely locked or internally damaged.
When to call a professional: Compressor replacement is a sealed system repair and must be performed by a certified technician.
Advertisements
Repair Difficulty
Professional Required
5/5
Advertisements