Water pooling at the bottom of the cabinet or leaking onto the floor in front of the wine cooler.

Safety: Unplug the unit before removing interior panels. Wipe up water promptly to avoid slipping.

Steps:

• Level the unit: Ensure the cooler is slightly tilted back so water flows toward the rear drain.
• Locate the drain: Inside the cabinet, find the small drain hole or channel at the rear bottom. Check for debris, mold, or ice blocking it.
• Clear the drain: Use a small flexible brush, pipe cleaner, or compressed air to clear the drain hole and tube.
• Check external drain hose and pan: At the rear, verify the drain hose is connected and routed to the condensate pan above the compressor. Ensure the pan is not cracked or overflowing.
• Inspect door gasket: A poor seal can cause excessive condensation. Replace the gasket if it is torn or warped.

Note: After clearing the drain, pour a small amount of water into the interior drain to confirm it flows to the pan.