Gorenje Failed Compressor Start

Clicking sound from compressor area every few minutes; compressor tries to start but stops.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Weak start relay/PTC, Low supply voltage, Locked rotor in compressor, Overheating thermal protector opening

Safety: Unplug the appliance before handling the compressor or start device.

Check supply voltage: Ensure the outlet provides stable voltage within the rated range.
Replace start relay/PTC: Remove and inspect the start device. If suspect, replace with a Gorenje-approved part.
Allow cooling: Let the compressor cool for at least 30–60 minutes, then try again.
Compressor diagnosis: If a new start device does not resolve the issue, the compressor may be mechanically locked and will require professional replacement.

Hard 4/5

Compressor Start Relay / PTC

Check Price on Amazon

We may earn a commission from links on this page.