Gorenje Wine Coolers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
dF
Display shows dF or similar defrost indication and unit may pause cooling.
Defrost Mode Indication (Not Always a Fault)
E1
Wine cooler display shows E1 and cabinet is not cooling or cooling poorly.
Cabinet Temperature Sensor (NTC) Failure
E2
Wine cooler shows E2 and may run continuously or not cool correctly.
Evaporator Temperature Sensor (NTC) Failure
E3
Display shows E3 and the wine cooler may not maintain the set temperature; compressor may not start.
Ambient (Room) Temperature Sensor Failure
E4
Wine cooler beeps and shows E4; interior temperature may fluctuate or defrost may not work correctly.
Defrost Sensor or Defrost Circuit Fault
E5
Display shows E5 and compressor may not start or may shut down quickly.
Compressor Overload or High Temperature Protection Fault
E6
Wine cooler shows E6 and interior fan does not run or runs intermittently.
Evaporator Fan Motor Fault
E7
Display shows E7 and the interior light or touch controls may behave erratically.
Control Panel Communication or Keypad Fault
E8
Wine cooler shows E8 and the unit may not cool; compressor may not run.
Main Control Board Failure or Power Supply Fault
E9
Display shows E9 and the door open alarm may sound even when the door is closed.
Door Switch or Door Sensor Fault
Er
Display shows a generic Er or error message without a specific number; unit may not respond to controls.
Generic Control System Error
F1
Upper zone of a dual-zone Gorenje wine cooler shows F1 and does not reach set temperature.
Upper Zone Temperature Sensor Fault
F2
Lower zone of a dual-zone Gorenje wine cooler shows F2 and does not reach set temperature.
Lower Zone Temperature Sensor Fault
F3
Dual-zone model shows F3 and zones may not maintain independent temperatures.
Zone Divider or Air Mixing Fan Fault
H1
Display shows H1 or flashes a high temperature warning; interior is warm.
High Temperature Alarm / Cooling Performance Fault
L1
Display shows L1 or a lock icon; buttons do not respond to presses.
Control Panel Child Lock Activated
Lo
Display shows Lo or a low temperature warning; interior may be colder than set point and bottles may frost.
Low Temperature Alarm / Overcooling Fault
Symptom
Clicking sound from compressor area every few minutes; compressor tries to start but stops.
Failed Compressor Start
Symptom
Compressor is very hot to the touch and the unit cools poorly or not at all.
Overheated Compressor
Symptom
Compressor runs continuously and cabinet becomes excessively cold or forms ice on bottles.
Compressor Stuck On
Symptom
Condensation or water droplets form on the inside of the glass door.
Door Condensation / High Humidity
Symptom
Display is dim, flickering, or some segments are missing, but cooling is normal.
Display Module Degradation
Symptom
Display works but buttons do not respond or respond intermittently.
Unresponsive Control Buttons
Symptom
Door gasket is torn, hardened, or moldy, leading to poor sealing and temperature issues.
Door Gasket Deterioration
Symptom
Dual-zone wine cooler shows correct temperatures but both zones feel the same and do not maintain separate conditions.
Loss of Zone Separation
Symptom
Excessive frost or ice buildup on the back wall or around the evaporator.
Frost Accumulation / Defrost Failure
Symptom
Interior fan does not run; cold spots and warm spots develop inside the cabinet.
Evaporator Fan Not Running
Symptom
Interior light stays on even when the door is closed, causing overheating and condensation.
Stuck Door Switch or Control Fault
Symptom
Temperature displayed on the control panel does not match an independent thermometer inside.
Temperature Calibration / Sensor Drift
Symptom
Unpleasant musty or moldy odor inside the wine cooler.
Internal Odor / Microbial Growth
Symptom
Water collects at the bottom of the wine cooler or on shelves.
Internal Water Leak / Drain Blockage
Symptom
Wine cooler cycles on and off very frequently, with short run times.
Short Cycling
Symptom
Wine cooler does not cool at all; interior light works but temperature remains at room level.
No Cooling – Compressor Not Running
Symptom
Wine cooler door does not close properly or pops open slightly after closing.
Door Alignment / Hinge Problem
Symptom
Wine cooler emits a high-pitched squealing or chirping noise from inside the cabinet.
Evaporator Fan Bearing Wear
Symptom
Wine cooler interior light does not work but cooling is normal.
Interior LED Light Failure
Symptom
Wine cooler is completely dead; no lights, no display, no sound.
No Power / Dead Appliance
Symptom
Wine cooler makes loud humming or buzzing noises during operation.
Excessive Vibration or Resonance
Symptom
Wine cooler runs but does not get cold enough; compressor and fan operate but temperature stays high.
Poor Cooling – Sealed System or Airflow Issue
Symptom
Wine cooler vibrates excessively and may move or rattle against cabinets.
Cabinet Vibration / Installation Issue
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| dF |
Display shows dF or similar defrost indication and unit may pause cooling.
|
Defrost Mode Indication (Not Always a Fault) | View Details |
| E1 |
Wine cooler display shows E1 and cabinet is not cooling or cooling poorly.
|
Cabinet Temperature Sensor (NTC) Failure | View Details |
| E2 |
Wine cooler shows E2 and may run continuously or not cool correctly.
|
Evaporator Temperature Sensor (NTC) Failure | View Details |
| E3 |
Display shows E3 and the wine cooler may not maintain the set temperature; compressor may not start.
|
Ambient (Room) Temperature Sensor Failure | View Details |
| E4 |
Wine cooler beeps and shows E4; interior temperature may fluctuate or defrost may not work correctly.
|
Defrost Sensor or Defrost Circuit Fault | View Details |
| E5 |
Display shows E5 and compressor may not start or may shut down quickly.
|
Compressor Overload or High Temperature Protection Fault | View Details |
| E6 |
Wine cooler shows E6 and interior fan does not run or runs intermittently.
|
Evaporator Fan Motor Fault | View Details |
| E7 |
Display shows E7 and the interior light or touch controls may behave erratically.
|
Control Panel Communication or Keypad Fault | View Details |
| E8 |
Wine cooler shows E8 and the unit may not cool; compressor may not run.
|
Main Control Board Failure or Power Supply Fault | View Details |
| E9 |
Display shows E9 and the door open alarm may sound even when the door is closed.
|
Door Switch or Door Sensor Fault | View Details |
| Er |
Display shows a generic Er or error message without a specific number; unit may not respond to controls.
|
Generic Control System Error | View Details |
| F1 |
Upper zone of a dual-zone Gorenje wine cooler shows F1 and does not reach set temperature.
|
Upper Zone Temperature Sensor Fault | View Details |
| F2 |
Lower zone of a dual-zone Gorenje wine cooler shows F2 and does not reach set temperature.
|
Lower Zone Temperature Sensor Fault | View Details |
| F3 |
Dual-zone model shows F3 and zones may not maintain independent temperatures.
|
Zone Divider or Air Mixing Fan Fault | View Details |
| H1 |
Display shows H1 or flashes a high temperature warning; interior is warm.
|
High Temperature Alarm / Cooling Performance Fault | View Details |
| L1 |
Display shows L1 or a lock icon; buttons do not respond to presses.
|
Control Panel Child Lock Activated | View Details |
| Lo |
Display shows Lo or a low temperature warning; interior may be colder than set point and bottles may frost.
|
Low Temperature Alarm / Overcooling Fault | View Details |
| – |
Clicking sound from compressor area every few minutes; compressor tries to start but stops.
|
Failed Compressor Start | View Details |
| – |
Compressor is very hot to the touch and the unit cools poorly or not at all.
|
Overheated Compressor | View Details |
| – |
Compressor runs continuously and cabinet becomes excessively cold or forms ice on bottles.
|
Compressor Stuck On | View Details |
| – |
Condensation or water droplets form on the inside of the glass door.
|
Door Condensation / High Humidity | View Details |
| – |
Display is dim, flickering, or some segments are missing, but cooling is normal.
|
Display Module Degradation | View Details |
| – |
Display works but buttons do not respond or respond intermittently.
|
Unresponsive Control Buttons | View Details |
| – |
Door gasket is torn, hardened, or moldy, leading to poor sealing and temperature issues.
|
Door Gasket Deterioration | View Details |
| – |
Dual-zone wine cooler shows correct temperatures but both zones feel the same and do not maintain separate conditions.
|
Loss of Zone Separation | View Details |
| – |
Excessive frost or ice buildup on the back wall or around the evaporator.
|
Frost Accumulation / Defrost Failure | View Details |
| – |
Interior fan does not run; cold spots and warm spots develop inside the cabinet.
|
Evaporator Fan Not Running | View Details |
| – |
Interior light stays on even when the door is closed, causing overheating and condensation.
|
Stuck Door Switch or Control Fault | View Details |
| – |
Temperature displayed on the control panel does not match an independent thermometer inside.
|
Temperature Calibration / Sensor Drift | View Details |
| – |
Unpleasant musty or moldy odor inside the wine cooler.
|
Internal Odor / Microbial Growth | View Details |
| – |
Water collects at the bottom of the wine cooler or on shelves.
|
Internal Water Leak / Drain Blockage | View Details |
| – |
Wine cooler cycles on and off very frequently, with short run times.
|
Short Cycling | View Details |
| – |
Wine cooler does not cool at all; interior light works but temperature remains at room level.
|
No Cooling – Compressor Not Running | View Details |
| – |
Wine cooler door does not close properly or pops open slightly after closing.
|
Door Alignment / Hinge Problem | View Details |
| – |
Wine cooler emits a high-pitched squealing or chirping noise from inside the cabinet.
|
Evaporator Fan Bearing Wear | View Details |
| – |
Wine cooler interior light does not work but cooling is normal.
|
Interior LED Light Failure | View Details |
| – |
Wine cooler is completely dead; no lights, no display, no sound.
|
No Power / Dead Appliance | View Details |
| – |
Wine cooler makes loud humming or buzzing noises during operation.
|
Excessive Vibration or Resonance | View Details |
| – |
Wine cooler runs but does not get cold enough; compressor and fan operate but temperature stays high.
|
Poor Cooling – Sealed System or Airflow Issue | View Details |
| – |
Wine cooler vibrates excessively and may move or rattle against cabinets.
|
Cabinet Vibration / Installation Issue | View Details |
No matching codes found
Advertisements