Gorenje
No Power / Dead Appliance
Wine cooler is completely dead; no lights, no display, no sound.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown internal fuse on PCB, Faulty power cord, Loose mains connection at terminal block, Failed main control PCB power supply
How to Fix / Troubleshooting
Safety: Ensure the outlet is switched off or unplugged before opening any panels.
- Check outlet: Test the wall socket with another appliance to confirm power is available.
- Inspect power cord: Look for cuts, kinks, or burn marks. Replace the cord if damaged.
- Access terminal block: Remove the rear panel and verify that the mains wires are securely fastened to the terminal block or PCB input.
- Check internal fuse: Many Gorenje PCBs have a small fuse. Test for continuity and replace with the same rating if blown. If it blows again immediately, there is likely a short on the PCB or wiring that needs professional diagnosis.
- Replace PCB: If the fuse is good and power is present at the board but nothing powers up, the PCB power supply is likely defective and the board should be replaced.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements