Hotpoint
No Power / Electrical Supply Failure
Wine cooler will not power on at all, display blank, no lights
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped circuit breaker, Faulty wall outlet, Damaged power cord, Failed main control board fuse or power supply
How to Fix / Troubleshooting
Safety: Do not attempt to bypass fuses or use damaged cords.
- Check household supply: Test the outlet with another appliance or a tester. Reset any tripped breakers or replace blown fuses.
- Inspect power cord: Look for cuts, burns, or kinks. If damaged, the cord must be replaced by a qualified technician.
- Try another outlet: Plug the wine cooler into a different, known-good outlet (without extension cords) to rule out supply issues.
- Access control board (advanced): If comfortable and safe, remove the rear/top panel and check for an onboard fuse. Replace only with the same rating if blown and if no obvious short is present.
- If still dead: The main control board or internal wiring may have failed. Professional diagnosis is recommended.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements