Wine cooler runs continuously but does not reach set temperature; interior is cool but not cold enough.

Safety first: Unplug the unit before cleaning or removing covers. Do not bend or puncture refrigerant lines.

Steps:

• 1. Check door seal and usage: Ensure the door is sealing properly and not opened excessively. High ambient temperature also reduces performance.
• 2. Clean condenser: Remove rear cover and thoroughly clean dust from condenser coils and fan (if fitted).
• 3. Monitor frost pattern: After running for 30–60 minutes, remove the interior rear panel and inspect the evaporator. A healthy system will show even frost across most of the coil. Frost only at the inlet or no frost suggests a sealed system issue.
• 4. Temperature verification: Use an accurate thermometer to confirm actual cabinet temperature versus display.
• 5. Professional service: If the evaporator frost pattern is abnormal or the unit cannot reach setpoint despite continuous running and good ventilation, contact a Liebherr-authorized technician for sealed system diagnosis.