Water pooling at the bottom of the wine cooler or leaking onto the floor.

Safety: Unplug the cooler and mop up standing water to prevent slipping.

• Level the unit: Use a spirit level to ensure the Pevino cooler is slightly tilted back so water flows to the drain. Adjust front leveling feet as needed.
• Clear drain hole: Remove interior back panel if necessary and locate the defrost drain hole at the bottom of the evaporator tray. Flush with warm water and clear with a flexible brush or pipe cleaner.
• Inspect drain tube and pan: From the rear, check that the drain tube leads to the external drain pan above the compressor and is not kinked or disconnected. Replace a cracked drain pan if leaking.
• Check door gasket: Replace a leaking door gasket to reduce excess condensation.