Pevino
Pevino Wine Coolers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
Display shows E0 and the wine cooler does not respond to temperature changes from the control panel.
Main Control Board Communication Fault
E1
Display shows E1 and the cabinet temperature is not controlled correctly (often too warm).
Upper Compartment Temperature Sensor (NTC) Failure
E10
Display shows E10 and the door alarm may sound even when the door is closed.
Door Switch / Door Sensor Fault
E11
Display shows E11 and the humidity function (if equipped) does not operate correctly.
Humidity Sensor / Humidity Control Fault
E12
Display shows E12 and the touch buttons on the control panel do not respond reliably.
Touch Control Panel / Keypad Fault
E13
Display shows E13 and the unit may shut down or restart intermittently.
Overtemperature / High Cabinet Temperature Protection
E14
Display shows E14 and the unit may not reach set temperature even though fans and compressor run.
Refrigeration System Efficiency Fault
E15
Display shows E15 and the interior LED lighting does not function correctly (flickers or stays off).
LED Lighting Circuit Fault
E16
Display shows E16 and the unit may trip the household breaker or blow fuses.
Short Circuit / Ground Fault in Appliance
E17
Display shows E17 and the dual-zone temperatures cannot be set independently.
Zone Separation / Air Damper Control Fault
E18
Display shows E18 and the unit emits a continuous alarm even though temperatures appear normal.
Alarm Circuit / Buzzer Control Fault
E2
Display shows E2 and the lower zone temperature is unstable or not cooling correctly.
Lower Compartment Temperature Sensor (NTC) Failure
E3
Display shows E3 and the compressor cycles erratically or runs continuously.
Ambient Temperature Sensor Failure
E4
Display shows E4 and the unit may defrost too often or form heavy ice on the evaporator.
Evaporator Defrost Sensor / Evaporator NTC Failure
E5
Display shows E5 and the unit may not defrost properly, leading to ice buildup and poor cooling.
Defrost Heater or Defrost Circuit Fault
E6
Display shows E6 and the compressor does not start or stops shortly after starting.
Compressor Start Protection / Overload Fault
E7
Display shows E7 and the internal fan does not run, causing uneven temperatures.
Evaporator / Internal Circulation Fan Fault
E8
Display shows E8 and the condenser fan at the rear does not run, or the compressor overheats.
Condenser Fan Motor Fault
E9
Display shows E9 and the interior light or some control functions behave erratically.
Low Voltage / Power Supply Fault
Symptom
Clicking sound every few minutes and compressor does not stay running.
Compressor Short Cycling / Start Failure
Symptom
Condensation or water droplets forming on the inside of the glass door.
Door Condensation / Insulation Issue
Symptom
Control panel is completely dead; no lights or display, but outlet has power.
No Power to Control / Dead Appliance
Symptom
Control panel lights up but buttons do not respond or respond intermittently.
Unresponsive Touch Controls
Symptom
Door does not close properly or pops open slightly after being shut.
Door Alignment / Hinge Problem
Symptom
Excessive frost or ice buildup on the evaporator and interior back wall.
Frost Buildup / Defrost System Failure
Symptom
Excessive vibration transmitted to cabinetry when the unit is built-in.
Installation / Isolation Issue
Symptom
High-pitched squealing or grinding noise from inside the cabinet.
Evaporator Fan Bearing Failure
Symptom
Interior LED lights do not turn on when the door is opened, but the cooler otherwise works.
Lighting Failure Only
Symptom
Interior LED lights stay on even when the door is closed.
Door Switch / Light Control Fault
Symptom
Loud humming, rattling, or vibrating noise during operation.
Excessive Vibration / Mechanical Noise
Symptom
Lower zone cools but upper zone is warm (dual-zone model).
Single Zone Cooling Loss (Upper Zone)
Symptom
Persistent musty or moldy odor inside the wine cooler.
Odor / Microbial Growth Inside Cabinet
Symptom
Strong chemical or burning smell when the unit is running.
Electrical Overheating / Component Failure
Symptom
Unit is unusually hot on the sides or top exterior surfaces.
Cabinet Heat / Condenser Loop Overheating
Symptom
Upper zone cools normally but lower zone is warm (dual-zone model).
Single Zone Cooling Loss (Lower Zone)
Symptom
Water pooling at the bottom of the wine cooler or leaking onto the floor.
Drainage / Water Leak Inside Cabinet
Symptom
Wine cooler interior temperature fluctuates widely; bottles experience frequent warming and cooling cycles.
Temperature Instability
Symptom
Wine cooler is too cold; bottles may be near freezing even at higher setpoints.
Overcooling / Thermostat Control Failure
Symptom
Wine cooler not cooling at all; interior is at room temperature, display may still light up.
Complete Loss of Cooling
Symptom
Wine cooler runs constantly but never reaches the set temperature; bottles feel only slightly cool.
Insufficient Cooling / Weak Cooling Performance
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
Display shows E0 and the wine cooler does not respond to temperature changes from the control panel.
|
Main Control Board Communication Fault | View Details |
| E1 |
Display shows E1 and the cabinet temperature is not controlled correctly (often too warm).
|
Upper Compartment Temperature Sensor (NTC) Failure | View Details |
| E10 |
Display shows E10 and the door alarm may sound even when the door is closed.
|
Door Switch / Door Sensor Fault | View Details |
| E11 |
Display shows E11 and the humidity function (if equipped) does not operate correctly.
|
Humidity Sensor / Humidity Control Fault | View Details |
| E12 |
Display shows E12 and the touch buttons on the control panel do not respond reliably.
|
Touch Control Panel / Keypad Fault | View Details |
| E13 |
Display shows E13 and the unit may shut down or restart intermittently.
|
Overtemperature / High Cabinet Temperature Protection | View Details |
| E14 |
Display shows E14 and the unit may not reach set temperature even though fans and compressor run.
|
Refrigeration System Efficiency Fault | View Details |
| E15 |
Display shows E15 and the interior LED lighting does not function correctly (flickers or stays off).
|
LED Lighting Circuit Fault | View Details |
| E16 |
Display shows E16 and the unit may trip the household breaker or blow fuses.
|
Short Circuit / Ground Fault in Appliance | View Details |
| E17 |
Display shows E17 and the dual-zone temperatures cannot be set independently.
|
Zone Separation / Air Damper Control Fault | View Details |
| E18 |
Display shows E18 and the unit emits a continuous alarm even though temperatures appear normal.
|
Alarm Circuit / Buzzer Control Fault | View Details |
| E2 |
Display shows E2 and the lower zone temperature is unstable or not cooling correctly.
|
Lower Compartment Temperature Sensor (NTC) Failure | View Details |
| E3 |
Display shows E3 and the compressor cycles erratically or runs continuously.
|
Ambient Temperature Sensor Failure | View Details |
| E4 |
Display shows E4 and the unit may defrost too often or form heavy ice on the evaporator.
|
Evaporator Defrost Sensor / Evaporator NTC Failure | View Details |
| E5 |
Display shows E5 and the unit may not defrost properly, leading to ice buildup and poor cooling.
|
Defrost Heater or Defrost Circuit Fault | View Details |
| E6 |
Display shows E6 and the compressor does not start or stops shortly after starting.
|
Compressor Start Protection / Overload Fault | View Details |
| E7 |
Display shows E7 and the internal fan does not run, causing uneven temperatures.
|
Evaporator / Internal Circulation Fan Fault | View Details |
| E8 |
Display shows E8 and the condenser fan at the rear does not run, or the compressor overheats.
|
Condenser Fan Motor Fault | View Details |
| E9 |
Display shows E9 and the interior light or some control functions behave erratically.
|
Low Voltage / Power Supply Fault | View Details |
| – |
Clicking sound every few minutes and compressor does not stay running.
|
Compressor Short Cycling / Start Failure | View Details |
| – |
Condensation or water droplets forming on the inside of the glass door.
|
Door Condensation / Insulation Issue | View Details |
| – |
Control panel is completely dead; no lights or display, but outlet has power.
|
No Power to Control / Dead Appliance | View Details |
| – |
Control panel lights up but buttons do not respond or respond intermittently.
|
Unresponsive Touch Controls | View Details |
| – |
Door does not close properly or pops open slightly after being shut.
|
Door Alignment / Hinge Problem | View Details |
| – |
Excessive frost or ice buildup on the evaporator and interior back wall.
|
Frost Buildup / Defrost System Failure | View Details |
| – |
Excessive vibration transmitted to cabinetry when the unit is built-in.
|
Installation / Isolation Issue | View Details |
| – |
High-pitched squealing or grinding noise from inside the cabinet.
|
Evaporator Fan Bearing Failure | View Details |
| – |
Interior LED lights do not turn on when the door is opened, but the cooler otherwise works.
|
Lighting Failure Only | View Details |
| – |
Interior LED lights stay on even when the door is closed.
|
Door Switch / Light Control Fault | View Details |
| – |
Loud humming, rattling, or vibrating noise during operation.
|
Excessive Vibration / Mechanical Noise | View Details |
| – |
Lower zone cools but upper zone is warm (dual-zone model).
|
Single Zone Cooling Loss (Upper Zone) | View Details |
| – |
Persistent musty or moldy odor inside the wine cooler.
|
Odor / Microbial Growth Inside Cabinet | View Details |
| – |
Strong chemical or burning smell when the unit is running.
|
Electrical Overheating / Component Failure | View Details |
| – |
Unit is unusually hot on the sides or top exterior surfaces.
|
Cabinet Heat / Condenser Loop Overheating | View Details |
| – |
Upper zone cools normally but lower zone is warm (dual-zone model).
|
Single Zone Cooling Loss (Lower Zone) | View Details |
| – |
Water pooling at the bottom of the wine cooler or leaking onto the floor.
|
Drainage / Water Leak Inside Cabinet | View Details |
| – |
Wine cooler interior temperature fluctuates widely; bottles experience frequent warming and cooling cycles.
|
Temperature Instability | View Details |
| – |
Wine cooler is too cold; bottles may be near freezing even at higher setpoints.
|
Overcooling / Thermostat Control Failure | View Details |
| – |
Wine cooler not cooling at all; interior is at room temperature, display may still light up.
|
Complete Loss of Cooling | View Details |
| – |
Wine cooler runs constantly but never reaches the set temperature; bottles feel only slightly cool.
|
Insufficient Cooling / Weak Cooling Performance | View Details |
No matching codes found
Advertisements