Ikea Dishwashers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
i10
Dishwasher does not fill with water; cycle starts then quickly stops and displays i10.
Water Inlet Timeout / No Fill
i20
Dishwasher stops mid-cycle, water remains in the bottom of the tub, and i20 is displayed.
Drain System Fault / Slow Drain
i30
Dishwasher stops, attempts to drain continuously, and displays i30; sometimes a beeping alarm is heard.
Anti-Flood System Activated / Leak Detected in Base
i40
Dishwasher displays i40 and may stop mid-cycle or fail to start properly.
Pressure Sensor / Water Level Sensor Fault
i50
Dishwasher stops and displays i50; may not circulate or drain water properly.
Motor / Pump Control Error
i60
Dishwasher completes cycle with cold dishes or stops and shows i60; sometimes water is overheated and steam is excessive.
Heating System Fault
i70
Dishwasher displays i70 and may stop or behave erratically with respect to water temperature.
Temperature Sensor (NTC) Fault
i80
Dishwasher shows i80 and may not start or may stop unexpectedly.
Program Memory / Control Board Configuration Error
i90
Dishwasher displays i90 and will not run a program.
Communication Error Between User Interface and Main Control Board
iA0
Dishwasher displays iA0 and may not start or may stop shortly after starting.
Spray Arm Blocked or Not Rotating
iC0
Dishwasher shows iC0 and may not respond to button presses correctly.
User Interface / Keypad Error
iD0
Dishwasher displays iD0 and will not start a wash cycle.
Door Lock / Door Switch Error
iE0
Dishwasher shows iE0 and may not start or may stop unexpectedly.
Configuration / Option Selection Error
iF0
Dishwasher shows iF0 and may run the drain pump continuously.
Overfill / Excess Water Detected
iF1
Dishwasher displays iF1 and may stop filling or draining correctly.
Flow Meter / Water Intake Measurement Error
iL0
Dishwasher shows iL0 and may have poor washing performance.
Low Water Level / Insufficient Fill
iP0
Dishwasher displays iP0 and may not complete cycles correctly.
Circulation Pressure / Pump Performance Error
Symptom
Burning smell or melted plastic odor during or after a cycle.
Overheating / Component or Item Contact with Heater
Symptom
Control panel buttons do not respond or respond intermittently; display may flicker.
User Interface Malfunction
Symptom
Detergent tablet remains partially or completely undissolved in the dispenser at the end of the cycle.
Detergent Dispenser / Spray Coverage Issue
Symptom
Dishes are not cleaned properly; food remains stuck and glasses are cloudy.
Poor Wash Performance
Symptom
Dishes remain wet at the end of the cycle; poor drying performance.
Poor Drying / Condensation Issue
Symptom
Dishwasher does not drain at the end of the cycle; standing water remains in the bottom.
No Drain / Standing Water
Symptom
Dishwasher fills with water but the wash cycle is very quiet and dishes come out dirty; spray arms do not seem to move.
Circulation Pump Failure
Symptom
Dishwasher is very noisy during wash or drain; grinding, rattling, or loud humming sounds are heard.
Excessive Noise / Mechanical Interference
Symptom
Dishwasher leaks water from the bottom front of the door during the wash cycle.
Door Leak / Gasket Failure
Symptom
Dishwasher powers on but will not start when Start is pressed; sometimes beeps and the door icon flashes.
Door Not Recognized as Closed
Symptom
Dishwasher runs for an unusually long time; cycles seem to never finish.
Extended Cycle Duration / Heating or Sensor Issue
Symptom
Dishwasher stops mid-cycle without draining; lights may remain on but no activity.
Mid-Cycle Interruption / Control or Sensor Fault
Symptom
Dishwasher vibrates excessively or moves within the cabinet during operation.
Vibration / Installation Issue
Symptom
Dishwasher will not power on at all; no lights or display, no response to buttons.
No Power / Dead Appliance
Symptom
Excessive foam or suds visible inside the dishwasher; sometimes leaks from the door.
Over-Sudsing / Detergent Misuse
Symptom
Rust spots or discoloration appearing on the interior stainless steel tub or racks.
Corrosion / Coating Damage
Symptom
Strong bad smell from inside the dishwasher, especially when opening the door after some time.
Odor / Bacterial Growth
Symptom
Water appears under or behind the dishwasher, but not from the door area.
Base Leak / Internal Hose or Pump Leak
Symptom
Water backs up into the dishwasher from the sink when the sink is drained.
Backflow from Sink / Improper Drain Installation
Symptom
White film or limescale deposits on dishes and inside the tub.
Limescale / Hard Water Deposits
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| i10 |
Dishwasher does not fill with water; cycle starts then quickly stops and displays i10.
|
Water Inlet Timeout / No Fill | View Details |
| i20 |
Dishwasher stops mid-cycle, water remains in the bottom of the tub, and i20 is displayed.
|
Drain System Fault / Slow Drain | View Details |
| i30 |
Dishwasher stops, attempts to drain continuously, and displays i30; sometimes a beeping alarm is heard.
|
Anti-Flood System Activated / Leak Detected in Base | View Details |
| i40 |
Dishwasher displays i40 and may stop mid-cycle or fail to start properly.
|
Pressure Sensor / Water Level Sensor Fault | View Details |
| i50 |
Dishwasher stops and displays i50; may not circulate or drain water properly.
|
Motor / Pump Control Error | View Details |
| i60 |
Dishwasher completes cycle with cold dishes or stops and shows i60; sometimes water is overheated and steam is excessive.
|
Heating System Fault | View Details |
| i70 |
Dishwasher displays i70 and may stop or behave erratically with respect to water temperature.
|
Temperature Sensor (NTC) Fault | View Details |
| i80 |
Dishwasher shows i80 and may not start or may stop unexpectedly.
|
Program Memory / Control Board Configuration Error | View Details |
| i90 |
Dishwasher displays i90 and will not run a program.
|
Communication Error Between User Interface and Main Control Board | View Details |
| iA0 |
Dishwasher displays iA0 and may not start or may stop shortly after starting.
|
Spray Arm Blocked or Not Rotating | View Details |
| iC0 |
Dishwasher shows iC0 and may not respond to button presses correctly.
|
User Interface / Keypad Error | View Details |
| iD0 |
Dishwasher displays iD0 and will not start a wash cycle.
|
Door Lock / Door Switch Error | View Details |
| iE0 |
Dishwasher shows iE0 and may not start or may stop unexpectedly.
|
Configuration / Option Selection Error | View Details |
| iF0 |
Dishwasher shows iF0 and may run the drain pump continuously.
|
Overfill / Excess Water Detected | View Details |
| iF1 |
Dishwasher displays iF1 and may stop filling or draining correctly.
|
Flow Meter / Water Intake Measurement Error | View Details |
| iL0 |
Dishwasher shows iL0 and may have poor washing performance.
|
Low Water Level / Insufficient Fill | View Details |
| iP0 |
Dishwasher displays iP0 and may not complete cycles correctly.
|
Circulation Pressure / Pump Performance Error | View Details |
| – |
Burning smell or melted plastic odor during or after a cycle.
|
Overheating / Component or Item Contact with Heater | View Details |
| – |
Control panel buttons do not respond or respond intermittently; display may flicker.
|
User Interface Malfunction | View Details |
| – |
Detergent tablet remains partially or completely undissolved in the dispenser at the end of the cycle.
|
Detergent Dispenser / Spray Coverage Issue | View Details |
| – |
Dishes are not cleaned properly; food remains stuck and glasses are cloudy.
|
Poor Wash Performance | View Details |
| – |
Dishes remain wet at the end of the cycle; poor drying performance.
|
Poor Drying / Condensation Issue | View Details |
| – |
Dishwasher does not drain at the end of the cycle; standing water remains in the bottom.
|
No Drain / Standing Water | View Details |
| – |
Dishwasher fills with water but the wash cycle is very quiet and dishes come out dirty; spray arms do not seem to move.
|
Circulation Pump Failure | View Details |
| – |
Dishwasher is very noisy during wash or drain; grinding, rattling, or loud humming sounds are heard.
|
Excessive Noise / Mechanical Interference | View Details |
| – |
Dishwasher leaks water from the bottom front of the door during the wash cycle.
|
Door Leak / Gasket Failure | View Details |
| – |
Dishwasher powers on but will not start when Start is pressed; sometimes beeps and the door icon flashes.
|
Door Not Recognized as Closed | View Details |
| – |
Dishwasher runs for an unusually long time; cycles seem to never finish.
|
Extended Cycle Duration / Heating or Sensor Issue | View Details |
| – |
Dishwasher stops mid-cycle without draining; lights may remain on but no activity.
|
Mid-Cycle Interruption / Control or Sensor Fault | View Details |
| – |
Dishwasher vibrates excessively or moves within the cabinet during operation.
|
Vibration / Installation Issue | View Details |
| – |
Dishwasher will not power on at all; no lights or display, no response to buttons.
|
No Power / Dead Appliance | View Details |
| – |
Excessive foam or suds visible inside the dishwasher; sometimes leaks from the door.
|
Over-Sudsing / Detergent Misuse | View Details |
| – |
Rust spots or discoloration appearing on the interior stainless steel tub or racks.
|
Corrosion / Coating Damage | View Details |
| – |
Strong bad smell from inside the dishwasher, especially when opening the door after some time.
|
Odor / Bacterial Growth | View Details |
| – |
Water appears under or behind the dishwasher, but not from the door area.
|
Base Leak / Internal Hose or Pump Leak | View Details |
| – |
Water backs up into the dishwasher from the sink when the sink is drained.
|
Backflow from Sink / Improper Drain Installation | View Details |
| – |
White film or limescale deposits on dishes and inside the tub.
|
Limescale / Hard Water Deposits | View Details |
No matching codes found
Advertisements