Blomberg Dishwashers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Dishwasher will not start a cycle; display shows E01 shortly after pressing Start.
Water Inlet Failure
E02
Dishwasher fills with water but then stops and displays E02; cycle does not progress.
Water Level / Pressure Sensor Error
E03
Dishwasher attempts to drain but water remains in the bottom and E03 is displayed.
Drain Pump or Drainage Fault
E04
Dishwasher stops mid-cycle and shows E04; sometimes accompanied by poor wash performance.
Water Distribution / Spray System Error
E05
Dishwasher displays E05 and stops; often occurs during filling or early in the cycle.
Flow Meter / Water Intake Measurement Error
E06
Dishwasher shows E06 and will not start or complete a cycle; door may appear closed.
Door Lock / Door Switch Error
E07
Dishwasher stops and displays E07; may be associated with water remaining in the base tray.
Anti-Flood / Leak Protection Activated
E08
Dishwasher shows E08 and may stop during heating or drying phase; dishes come out cold and wet.
Heating Circuit Error
E09
Dishwasher displays E09; may be associated with overfilling or repeated filling and draining.
Overfill / Overflow Protection Error
E10
Dishwasher shows E10 and may not heat or may terminate cycles early.
NTC Temperature Sensor Fault
E11
Dishwasher displays E11; may be associated with fan-assisted drying not working on models with a drying fan.
Drying Fan / Ventilation Error
E12
Dishwasher shows E12; often related to turbidity or water quality sensing issues on models with a turbidity sensor.
Turbidity / Optical Sensor Error
E13
Dishwasher displays E13; may be associated with communication issues between control modules on advanced models.
Communication / Control Board Error
E14
Dishwasher shows E14; may be associated with low water level or short fill conditions.
Short Fill / Insufficient Water Error
E15
Dishwasher displays E15 and will not start; often accompanied by the sound of the drain pump running continuously.
Base Leak / Anti-Flood Activation
E16
Dishwasher shows E16; may be associated with continuous filling or water entering even when off.
Inlet Valve Stuck Open
E17
Dishwasher displays E17; may be associated with unusually high water level or rapid filling.
High Water Pressure / Overfill Detection
E18
Dishwasher shows E18; typically indicates a filling timeout or no water entering.
No Fill / Fill Timeout
E19
Dishwasher displays E19; often related to internal water switching or diverter valve issues.
Diverter Valve / Water Switch Error
E20
Dishwasher shows E20; may be associated with circulation pump not running or poor wash performance.
Circulation Pump Motor Error
Symptom
Detergent tablet or powder remains in the dispenser at the end of the cycle.
Detergent Dispenser Not Opening / Not Rinsed
Symptom
Dishes come out wet and not properly dried at the end of the cycle.
Poor Drying Performance
Symptom
Dishwasher does not power on at all; no lights or display.
No Mains Power / Power Supply Failure
Symptom
Dishwasher door drops down quickly or will not stay in the partially open position.
Door Hinge / Spring Counterbalance Failure
Symptom
Dishwasher is very noisy during operation; grinding, rattling, or loud humming sounds.
Mechanical Noise / Pump or Spray System Fault
Symptom
Dishwasher leaks water from the front door area during a cycle.
Door Seal / Spray Pattern Leak
Symptom
Dishwasher leaks water from underneath; puddle appears under the machine.
Base Leak / Internal Hose or Sump Leak
Symptom
Dishwasher leaves standing water in the bottom at the end of the cycle; no error code shown.
Incomplete Drainage
Symptom
Dishwasher powers on but will not start when Start button is pressed; no error code displayed.
User Interface / Start Inhibit Fault
Symptom
Dishwasher runs but dishes are not getting clean; food residue remains on plates and glasses.
Poor Wash Performance / Inadequate Cleaning
Symptom
Dishwasher runs for an unusually long time or seems stuck on one part of the cycle.
Extended Cycle Time / Sensor or Heating Issue
Symptom
Dishwasher vibrates excessively or moves during operation.
Excessive Vibration / Installation Fault
Symptom
Display shows unusual symbols or buttons respond erratically without a specific error code.
Control Panel / User Interface Malfunction
Symptom
Rust spots appearing on the interior racks or tub components.
Rack Coating Failure / Corrosion
Symptom
Unpleasant smell coming from the dishwasher, even when not in use.
Odor / Bacterial Growth in Sump and Hoses
Symptom
Water remains in the bottom of the dishwasher between cycles, slowly seeping back after draining.
Backflow from Sink / Improper Drain Installation
Symptom
White film or cloudy residue on glasses and dishes after washing.
Limescale / Detergent Residue
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Dishwasher will not start a cycle; display shows E01 shortly after pressing Start.
|
Water Inlet Failure | View Details |
| E02 |
Dishwasher fills with water but then stops and displays E02; cycle does not progress.
|
Water Level / Pressure Sensor Error | View Details |
| E03 |
Dishwasher attempts to drain but water remains in the bottom and E03 is displayed.
|
Drain Pump or Drainage Fault | View Details |
| E04 |
Dishwasher stops mid-cycle and shows E04; sometimes accompanied by poor wash performance.
|
Water Distribution / Spray System Error | View Details |
| E05 |
Dishwasher displays E05 and stops; often occurs during filling or early in the cycle.
|
Flow Meter / Water Intake Measurement Error | View Details |
| E06 |
Dishwasher shows E06 and will not start or complete a cycle; door may appear closed.
|
Door Lock / Door Switch Error | View Details |
| E07 |
Dishwasher stops and displays E07; may be associated with water remaining in the base tray.
|
Anti-Flood / Leak Protection Activated | View Details |
| E08 |
Dishwasher shows E08 and may stop during heating or drying phase; dishes come out cold and wet.
|
Heating Circuit Error | View Details |
| E09 |
Dishwasher displays E09; may be associated with overfilling or repeated filling and draining.
|
Overfill / Overflow Protection Error | View Details |
| E10 |
Dishwasher shows E10 and may not heat or may terminate cycles early.
|
NTC Temperature Sensor Fault | View Details |
| E11 |
Dishwasher displays E11; may be associated with fan-assisted drying not working on models with a drying fan.
|
Drying Fan / Ventilation Error | View Details |
| E12 |
Dishwasher shows E12; often related to turbidity or water quality sensing issues on models with a turbidity sensor.
|
Turbidity / Optical Sensor Error | View Details |
| E13 |
Dishwasher displays E13; may be associated with communication issues between control modules on advanced models.
|
Communication / Control Board Error | View Details |
| E14 |
Dishwasher shows E14; may be associated with low water level or short fill conditions.
|
Short Fill / Insufficient Water Error | View Details |
| E15 |
Dishwasher displays E15 and will not start; often accompanied by the sound of the drain pump running continuously.
|
Base Leak / Anti-Flood Activation | View Details |
| E16 |
Dishwasher shows E16; may be associated with continuous filling or water entering even when off.
|
Inlet Valve Stuck Open | View Details |
| E17 |
Dishwasher displays E17; may be associated with unusually high water level or rapid filling.
|
High Water Pressure / Overfill Detection | View Details |
| E18 |
Dishwasher shows E18; typically indicates a filling timeout or no water entering.
|
No Fill / Fill Timeout | View Details |
| E19 |
Dishwasher displays E19; often related to internal water switching or diverter valve issues.
|
Diverter Valve / Water Switch Error | View Details |
| E20 |
Dishwasher shows E20; may be associated with circulation pump not running or poor wash performance.
|
Circulation Pump Motor Error | View Details |
| – |
Detergent tablet or powder remains in the dispenser at the end of the cycle.
|
Detergent Dispenser Not Opening / Not Rinsed | View Details |
| – |
Dishes come out wet and not properly dried at the end of the cycle.
|
Poor Drying Performance | View Details |
| – |
Dishwasher does not power on at all; no lights or display.
|
No Mains Power / Power Supply Failure | View Details |
| – |
Dishwasher door drops down quickly or will not stay in the partially open position.
|
Door Hinge / Spring Counterbalance Failure | View Details |
| – |
Dishwasher is very noisy during operation; grinding, rattling, or loud humming sounds.
|
Mechanical Noise / Pump or Spray System Fault | View Details |
| – |
Dishwasher leaks water from the front door area during a cycle.
|
Door Seal / Spray Pattern Leak | View Details |
| – |
Dishwasher leaks water from underneath; puddle appears under the machine.
|
Base Leak / Internal Hose or Sump Leak | View Details |
| – |
Dishwasher leaves standing water in the bottom at the end of the cycle; no error code shown.
|
Incomplete Drainage | View Details |
| – |
Dishwasher powers on but will not start when Start button is pressed; no error code displayed.
|
User Interface / Start Inhibit Fault | View Details |
| – |
Dishwasher runs but dishes are not getting clean; food residue remains on plates and glasses.
|
Poor Wash Performance / Inadequate Cleaning | View Details |
| – |
Dishwasher runs for an unusually long time or seems stuck on one part of the cycle.
|
Extended Cycle Time / Sensor or Heating Issue | View Details |
| – |
Dishwasher vibrates excessively or moves during operation.
|
Excessive Vibration / Installation Fault | View Details |
| – |
Display shows unusual symbols or buttons respond erratically without a specific error code.
|
Control Panel / User Interface Malfunction | View Details |
| – |
Rust spots appearing on the interior racks or tub components.
|
Rack Coating Failure / Corrosion | View Details |
| – |
Unpleasant smell coming from the dishwasher, even when not in use.
|
Odor / Bacterial Growth in Sump and Hoses | View Details |
| – |
Water remains in the bottom of the dishwasher between cycles, slowly seeping back after draining.
|
Backflow from Sink / Improper Drain Installation | View Details |
| – |
White film or cloudy residue on glasses and dishes after washing.
|
Limescale / Detergent Residue | View Details |
No matching codes found
Advertisements