Philips
Philips Multicookers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Multicooker will not start a program and displays E1 shortly after pressing Start.
Lid / Cover Not Properly Closed or Lid Switch Fault
E10
E10 appears when trying to start a program; cooker may beep repeatedly.
Ambient Temperature Too Low or Sensor Calibration Error
E11
E11 error appears during pressure cooking; cooker stops and depressurizes.
Abnormal Pressure Drop During Cooking
E12
E12 is displayed and the cooker cannot start or complete a program.
Internal Power Supply Fault on Control Board
E2
Multicooker beeps and shows E2, will not heat or start cooking.
Bottom Temperature Sensor (NTC) Fault or Open Circuit
E3
Display shows E3 during preheating or cooking; unit stops heating.
Overtemperature Protection Triggered (Overheat on Heating Plate)
E4
E4 appears on the display and cooking stops or will not start.
Lid Temperature Sensor (Upper NTC) Fault
E5
E5 error appears, cooker stops heating or will not start pressure programs.
Pressure Sensor Fault or Out-of-Range Signal
E6
E6 is displayed and the cooker refuses to build or maintain pressure.
Abnormal Pressure Rise / Overpressure Detection
E7
E7 appears and the cooker cannot reach or hold the selected pressure level.
Pressure Not Reached / Pressure Leakage Detected
E8
E8 error on display, cooker stops mid-cycle or will not start.
Internal Communication Error Between Control PCB and Sensor Modules
E9
E9 is displayed and the cooker will not heat or complete programs.
Heating Element Circuit Fault
Err
Display shows 'Err' or 'Error' without a number; cooker beeps and stops.
Generic System Error / Undefined Fault
H0
Display shows H0 or similar code and the cooker does not heat properly.
Keep-Warm / Low-Heat Mode Indicator or Sensor Misread
Symptom
Burning smell during operation, even when food is not burnt.
Overheating or Electrical Insulation Breakdown
Symptom
Buttons or touch controls respond intermittently or activate by themselves.
Control Panel / Keypad Malfunction
Symptom
Clicking or popping sounds from the base during heating.
Thermal Expansion Noise / Relay Operation
Symptom
Condensation accumulates on the countertop around the cooker during use.
Condensation Management / Steam Direction Issue
Symptom
Display and lights work, but the cooker does not heat at all.
Heater Not Energizing
Symptom
Display is dim, flickering, or some segments are missing.
Display Module or Power Supply Degradation
Symptom
Fan noise from the side or bottom of the multicooker is unusually loud or grinding (on models with cooling fan).
Cooling Fan Wear or Obstruction
Symptom
Inner pot coating is peeling or scratched, and food sticks badly.
Non-Stick Coating Degradation
Symptom
Keep-warm function overheats food, causing it to dry out or burn.
Keep-Warm Temperature Too High
Symptom
Lid does not lock properly; cooker refuses to start pressure programs.
Lid Lock Engagement Failure
Symptom
Lid will not open after cooking; it feels locked even when the program is finished.
Lid Lock Mechanism Stuck / Residual Pressure
Symptom
Loud hissing, rattling, or whistling noises during pressure cooking.
Abnormal Pressure Noise / Valve Vibration
Symptom
Multicooker does not power on at all; no lights or display.
No Power / Dead Appliance
Symptom
Multicooker heats but food remains undercooked or cooking takes much longer than usual.
Insufficient Heating / Temperature Regulation Fault
Symptom
Multicooker overheats, burning food on the bottom while the top remains undercooked.
Localized Overheating / Sensor Misplacement
Symptom
Multicooker powers on but will not start any program when Start is pressed.
Start Circuit / Keypad Input Failure
Symptom
Multicooker trips the household circuit breaker or RCD when plugged in or when heating starts.
Electrical Short or Ground Fault
Symptom
Multicooker vibrates excessively or moves slightly on the countertop during operation.
Mechanical Vibration / Unstable Placement
Symptom
Rice or other grains are consistently mushy or overcooked on automatic programs.
Program Calibration / Sensor Sensitivity Issue
Symptom
Steam continuously escapes from the steam release valve and pressure never builds.
Steam Release Valve Not Sealing
Symptom
Steam or water leaks from around the lid during pressure cooking.
Lid Seal Leakage
Symptom
Unpleasant or persistent food odors remain in the cooker and affect new dishes.
Odor Retention in Sealing Ring and Inner Pot
Symptom
Water or starchy liquid drips from the sides or bottom of the multicooker during or after cooking.
External Leakage / Condensation Management Issue
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Multicooker will not start a program and displays E1 shortly after pressing Start.
|
Lid / Cover Not Properly Closed or Lid Switch Fault | View Details |
| E10 |
E10 appears when trying to start a program; cooker may beep repeatedly.
|
Ambient Temperature Too Low or Sensor Calibration Error | View Details |
| E11 |
E11 error appears during pressure cooking; cooker stops and depressurizes.
|
Abnormal Pressure Drop During Cooking | View Details |
| E12 |
E12 is displayed and the cooker cannot start or complete a program.
|
Internal Power Supply Fault on Control Board | View Details |
| E2 |
Multicooker beeps and shows E2, will not heat or start cooking.
|
Bottom Temperature Sensor (NTC) Fault or Open Circuit | View Details |
| E3 |
Display shows E3 during preheating or cooking; unit stops heating.
|
Overtemperature Protection Triggered (Overheat on Heating Plate) | View Details |
| E4 |
E4 appears on the display and cooking stops or will not start.
|
Lid Temperature Sensor (Upper NTC) Fault | View Details |
| E5 |
E5 error appears, cooker stops heating or will not start pressure programs.
|
Pressure Sensor Fault or Out-of-Range Signal | View Details |
| E6 |
E6 is displayed and the cooker refuses to build or maintain pressure.
|
Abnormal Pressure Rise / Overpressure Detection | View Details |
| E7 |
E7 appears and the cooker cannot reach or hold the selected pressure level.
|
Pressure Not Reached / Pressure Leakage Detected | View Details |
| E8 |
E8 error on display, cooker stops mid-cycle or will not start.
|
Internal Communication Error Between Control PCB and Sensor Modules | View Details |
| E9 |
E9 is displayed and the cooker will not heat or complete programs.
|
Heating Element Circuit Fault | View Details |
| Err |
Display shows 'Err' or 'Error' without a number; cooker beeps and stops.
|
Generic System Error / Undefined Fault | View Details |
| H0 |
Display shows H0 or similar code and the cooker does not heat properly.
|
Keep-Warm / Low-Heat Mode Indicator or Sensor Misread | View Details |
| – |
Burning smell during operation, even when food is not burnt.
|
Overheating or Electrical Insulation Breakdown | View Details |
| – |
Buttons or touch controls respond intermittently or activate by themselves.
|
Control Panel / Keypad Malfunction | View Details |
| – |
Clicking or popping sounds from the base during heating.
|
Thermal Expansion Noise / Relay Operation | View Details |
| – |
Condensation accumulates on the countertop around the cooker during use.
|
Condensation Management / Steam Direction Issue | View Details |
| – |
Display and lights work, but the cooker does not heat at all.
|
Heater Not Energizing | View Details |
| – |
Display is dim, flickering, or some segments are missing.
|
Display Module or Power Supply Degradation | View Details |
| – |
Fan noise from the side or bottom of the multicooker is unusually loud or grinding (on models with cooling fan).
|
Cooling Fan Wear or Obstruction | View Details |
| – |
Inner pot coating is peeling or scratched, and food sticks badly.
|
Non-Stick Coating Degradation | View Details |
| – |
Keep-warm function overheats food, causing it to dry out or burn.
|
Keep-Warm Temperature Too High | View Details |
| – |
Lid does not lock properly; cooker refuses to start pressure programs.
|
Lid Lock Engagement Failure | View Details |
| – |
Lid will not open after cooking; it feels locked even when the program is finished.
|
Lid Lock Mechanism Stuck / Residual Pressure | View Details |
| – |
Loud hissing, rattling, or whistling noises during pressure cooking.
|
Abnormal Pressure Noise / Valve Vibration | View Details |
| – |
Multicooker does not power on at all; no lights or display.
|
No Power / Dead Appliance | View Details |
| – |
Multicooker heats but food remains undercooked or cooking takes much longer than usual.
|
Insufficient Heating / Temperature Regulation Fault | View Details |
| – |
Multicooker overheats, burning food on the bottom while the top remains undercooked.
|
Localized Overheating / Sensor Misplacement | View Details |
| – |
Multicooker powers on but will not start any program when Start is pressed.
|
Start Circuit / Keypad Input Failure | View Details |
| – |
Multicooker trips the household circuit breaker or RCD when plugged in or when heating starts.
|
Electrical Short or Ground Fault | View Details |
| – |
Multicooker vibrates excessively or moves slightly on the countertop during operation.
|
Mechanical Vibration / Unstable Placement | View Details |
| – |
Rice or other grains are consistently mushy or overcooked on automatic programs.
|
Program Calibration / Sensor Sensitivity Issue | View Details |
| – |
Steam continuously escapes from the steam release valve and pressure never builds.
|
Steam Release Valve Not Sealing | View Details |
| – |
Steam or water leaks from around the lid during pressure cooking.
|
Lid Seal Leakage | View Details |
| – |
Unpleasant or persistent food odors remain in the cooker and affect new dishes.
|
Odor Retention in Sealing Ring and Inner Pot | View Details |
| – |
Water or starchy liquid drips from the sides or bottom of the multicooker during or after cooking.
|
External Leakage / Condensation Management Issue | View Details |
No matching codes found
Advertisements