Hotpoint-Ariston
Hotpoint-Ariston Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
F01
Oven will not heat, display is on, fan may run but no warmth in any cooking mode.
Main Power Relay or Power Board Failure
F02
Oven fan runs but temperature does not rise properly or oven overheats; error F02 appears on display.
Oven Temperature Sensor (NTC) Circuit Fault
F03
Oven does not heat or heats erratically; display shows F03, often associated with grill or upper element issues.
Grill / Upper Heating Element Circuit Fault
F04
Oven fails to heat in conventional or fan modes; F04 appears, often linked to lower or circular element failure.
Main Oven Heating Element Circuit Fault
F05
Oven fan does not run in fan-assisted modes; poor or uneven cooking; F05 displayed.
Convection Fan Motor or Fan Circuit Fault
F06
Oven display shows F06 and controls may be unresponsive or behave erratically.
User Interface / Keypad Communication Error
F07
Oven shows F07 and may shut down heating unexpectedly, often after running for some time.
Cooling Fan or Overtemperature Protection Fault
F08
Oven shows F08 and may not start or may cut out; often linked to power supply or relay issues.
Power Supply or Relay Stuck Fault
F09
Display shows F09, oven may freeze or reboot, clock may reset.
EEPROM / Configuration Memory Error
F10
Oven shows F10 and may not heat; often associated with a second temperature sensor (e.g. grill or pyrolytic sensor).
Auxiliary Temperature Sensor Fault
F11
Oven beeps and displays F11; some buttons may not respond or may trigger the wrong function.
Key Stuck or Touch Panel Fault
F12
Display shows F12 and oven functions are disabled; often indicates communication failure between boards.
Communication Error Between Display Board and Power Board
F13
Oven shows F13, often on models with a meat probe or special sensor; cooking may stop.
Meat Probe or Accessory Sensor Fault
F14
Oven shows F14 and may not start; often related to door lock on pyrolytic models.
Door Lock Mechanism Fault
F15
Oven shows F15 and may not enter or exit pyrolytic self-clean mode.
Pyrolytic Cycle Control Fault
F16
Oven shows F16; some models may lose control of temperature or fan speed.
Triac or Power Control Device Fault
F17
Oven shows F17; often associated with clock or timer malfunction preventing oven start.
Clock / Timer Module Fault
F18
Oven shows F18; may be related to data communication or configuration on some models.
Configuration / Software Communication Fault
Symptom
Control knobs are very stiff or difficult to turn.
Seized or Contaminated Control Shafts
Symptom
Cooling fan at the top of the oven runs continuously, even when the oven is cold and off.
Cooling Fan Stuck On
Symptom
Grill does not work, but oven heats normally in other modes.
Grill Element Failure
Symptom
Oven clock and display work, but oven will not start heating until the time is set.
Timer Not Set / Auto Mode Latched
Symptom
Oven display is blank and oven appears completely dead.
No Power / Dead Appliance
Symptom
Oven display works but buttons do not respond or respond intermittently.
Unresponsive Touchpad / Keypad
Symptom
Oven does not heat at all in any mode; display and lights work but cavity remains cold.
Total Heating Failure
Symptom
Oven door does not seal properly; visible gaps or steam escaping around the door.
Door Gasket / Seal Failure
Symptom
Oven door glass is loose, rattling, or has condensation between panes.
Door Glass Assembly / Seal Issue
Symptom
Oven door will not close fully; heat escapes and cooking is uneven.
Door Hinge or Hinge Receiver Wear
Symptom
Oven emits a burning smell or smoke during normal cooking (not first use or self-clean).
Overheating Residues or Electrical Overheating
Symptom
Oven fan runs but there is no heat in fan-assisted modes; conventional top/bottom heat may still work.
Circular Fan Element Failure
Symptom
Oven heats but does not reach set temperature or takes excessively long to preheat.
Underheating / Long Preheat
Symptom
Oven interior enamel is chipped or rusting, exposing metal.
Cavity Enamel Damage
Symptom
Oven interior light and display work, but selecting a function does nothing (no fan, no heat, no relay clicks).
Function Selector or Control Inhibit
Symptom
Oven light does not work, but heating and fan are normal.
Oven Cavity Lamp Failure
Symptom
Oven makes a humming or buzzing noise from the control area when heating.
Noisy Relay or Transformer
Symptom
Oven makes loud rattling or scraping noises when the fan is running.
Fan Blade Obstruction or Worn Fan Motor Bearings
Symptom
Oven overheats, burning food even at low temperature settings.
Overheating / Temperature Runaway
Symptom
Oven trips the circuit breaker or RCD when turned on or when a specific function is selected.
Electrical Short or Earth Leakage
Symptom
Steam or moisture appears on the control panel or between door glass panes during cooking.
Ventilation / Door Seal Moisture Issue
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| F01 |
Oven will not heat, display is on, fan may run but no warmth in any cooking mode.
|
Main Power Relay or Power Board Failure | View Details |
| F02 |
Oven fan runs but temperature does not rise properly or oven overheats; error F02 appears on display.
|
Oven Temperature Sensor (NTC) Circuit Fault | View Details |
| F03 |
Oven does not heat or heats erratically; display shows F03, often associated with grill or upper element issues.
|
Grill / Upper Heating Element Circuit Fault | View Details |
| F04 |
Oven fails to heat in conventional or fan modes; F04 appears, often linked to lower or circular element failure.
|
Main Oven Heating Element Circuit Fault | View Details |
| F05 |
Oven fan does not run in fan-assisted modes; poor or uneven cooking; F05 displayed.
|
Convection Fan Motor or Fan Circuit Fault | View Details |
| F06 |
Oven display shows F06 and controls may be unresponsive or behave erratically.
|
User Interface / Keypad Communication Error | View Details |
| F07 |
Oven shows F07 and may shut down heating unexpectedly, often after running for some time.
|
Cooling Fan or Overtemperature Protection Fault | View Details |
| F08 |
Oven shows F08 and may not start or may cut out; often linked to power supply or relay issues.
|
Power Supply or Relay Stuck Fault | View Details |
| F09 |
Display shows F09, oven may freeze or reboot, clock may reset.
|
EEPROM / Configuration Memory Error | View Details |
| F10 |
Oven shows F10 and may not heat; often associated with a second temperature sensor (e.g. grill or pyrolytic sensor).
|
Auxiliary Temperature Sensor Fault | View Details |
| F11 |
Oven beeps and displays F11; some buttons may not respond or may trigger the wrong function.
|
Key Stuck or Touch Panel Fault | View Details |
| F12 |
Display shows F12 and oven functions are disabled; often indicates communication failure between boards.
|
Communication Error Between Display Board and Power Board | View Details |
| F13 |
Oven shows F13, often on models with a meat probe or special sensor; cooking may stop.
|
Meat Probe or Accessory Sensor Fault | View Details |
| F14 |
Oven shows F14 and may not start; often related to door lock on pyrolytic models.
|
Door Lock Mechanism Fault | View Details |
| F15 |
Oven shows F15 and may not enter or exit pyrolytic self-clean mode.
|
Pyrolytic Cycle Control Fault | View Details |
| F16 |
Oven shows F16; some models may lose control of temperature or fan speed.
|
Triac or Power Control Device Fault | View Details |
| F17 |
Oven shows F17; often associated with clock or timer malfunction preventing oven start.
|
Clock / Timer Module Fault | View Details |
| F18 |
Oven shows F18; may be related to data communication or configuration on some models.
|
Configuration / Software Communication Fault | View Details |
| – |
Control knobs are very stiff or difficult to turn.
|
Seized or Contaminated Control Shafts | View Details |
| – |
Cooling fan at the top of the oven runs continuously, even when the oven is cold and off.
|
Cooling Fan Stuck On | View Details |
| – |
Grill does not work, but oven heats normally in other modes.
|
Grill Element Failure | View Details |
| – |
Oven clock and display work, but oven will not start heating until the time is set.
|
Timer Not Set / Auto Mode Latched | View Details |
| – |
Oven display is blank and oven appears completely dead.
|
No Power / Dead Appliance | View Details |
| – |
Oven display works but buttons do not respond or respond intermittently.
|
Unresponsive Touchpad / Keypad | View Details |
| – |
Oven does not heat at all in any mode; display and lights work but cavity remains cold.
|
Total Heating Failure | View Details |
| – |
Oven door does not seal properly; visible gaps or steam escaping around the door.
|
Door Gasket / Seal Failure | View Details |
| – |
Oven door glass is loose, rattling, or has condensation between panes.
|
Door Glass Assembly / Seal Issue | View Details |
| – |
Oven door will not close fully; heat escapes and cooking is uneven.
|
Door Hinge or Hinge Receiver Wear | View Details |
| – |
Oven emits a burning smell or smoke during normal cooking (not first use or self-clean).
|
Overheating Residues or Electrical Overheating | View Details |
| – |
Oven fan runs but there is no heat in fan-assisted modes; conventional top/bottom heat may still work.
|
Circular Fan Element Failure | View Details |
| – |
Oven heats but does not reach set temperature or takes excessively long to preheat.
|
Underheating / Long Preheat | View Details |
| – |
Oven interior enamel is chipped or rusting, exposing metal.
|
Cavity Enamel Damage | View Details |
| – |
Oven interior light and display work, but selecting a function does nothing (no fan, no heat, no relay clicks).
|
Function Selector or Control Inhibit | View Details |
| – |
Oven light does not work, but heating and fan are normal.
|
Oven Cavity Lamp Failure | View Details |
| – |
Oven makes a humming or buzzing noise from the control area when heating.
|
Noisy Relay or Transformer | View Details |
| – |
Oven makes loud rattling or scraping noises when the fan is running.
|
Fan Blade Obstruction or Worn Fan Motor Bearings | View Details |
| – |
Oven overheats, burning food even at low temperature settings.
|
Overheating / Temperature Runaway | View Details |
| – |
Oven trips the circuit breaker or RCD when turned on or when a specific function is selected.
|
Electrical Short or Earth Leakage | View Details |
| – |
Steam or moisture appears on the control panel or between door glass panes during cooking.
|
Ventilation / Door Seal Moisture Issue | View Details |
No matching codes found
Advertisements