Whirlpool Washer-Dryer Combos Error Codes

F01

Washer-dryer combo will not start any cycle; display shows F01 and may beep repeatedly.

Main Control Board Failure

F02

Washer-dryer combo stops mid-cycle and will not drain; display shows F02 or F2 and water remains in drum.

Long Drain Fault

F03

Washer-dryer combo stops early in cycle; display shows F03 and may not advance past initial fill.

Water Temperature Sensor (NTC) Fault

F05

Washer-dryer combo will not start or advance; display shows F05 and may indicate a door or water level issue.

Water Level Pressure Switch Fault

F06

Washer-dryer combo will not spin or tumble; display shows F06 and may stop shortly after starting a cycle.

Motor Tachometer or Motor Drive Fault

F07

Washer-dryer combo does not heat water; display shows F07 during wash cycle.

Heater Relay or Heating Circuit Fault

F08

Washer-dryer combo shows F08 and may not fill correctly or may overfill/underfill.

Heater or Water Level Related Fault (Heater Relay Stuck or Fill Error)

F09

Washer-dryer combo displays F09 and may have water remaining in the drum or may abort cycle.

Overflow or Long Drain Condition

F10

Washer-dryer combo shows F10 and may not detect correct water level or may stop filling prematurely.

Pressure Switch or Air Trap Fault

F11

Washer-dryer combo stops mid-cycle and displays F11; may not respond to commands or may freeze.

Serial Communication Error Between Control Boards

F12

Washer-dryer combo displays F12 and may not start or may randomly reset.

Communication Error or Power Supply Fault

F13

Washer-dryer combo shows F13 during drying cycle; drying does not start or stops quickly.

Dryer Temperature Sensor or Fan Fault

F14

Washer-dryer combo displays F14 and will not start a drying cycle.

EEPROM or Program Error on Control Board

F15

Washer-dryer combo shows F15 and drying function is disabled.

Dryer Heater Relay or Heating Circuit Fault

F18

Washer-dryer combo displays F18 and may not complete cycles or may behave erratically.

Internal Control Board Error

F21

Washer-dryer combo shows F21 and will not drain or complete the cycle; water remains in drum.

Long Drain Time Fault

F22

Washer-dryer combo will not start; display shows F22 and door remains unlocked or lock light flashes.

Door Lock Error

F23

Washer-dryer combo shows F23 and may not heat water properly or may abort cycle.

Heater Temperature Sensor (NTC) Error

F24

Washer-dryer combo displays F24 and may not heat water or may stop mid-cycle.

Water Temperature Sensor Out of Range

F25

Washer-dryer combo shows F25 and may not spin properly or may stop with clothes wet.

Drive Motor Tachometer Error

F26

Washer-dryer combo displays F26 and may not lock the door or start a cycle.

Door Switch or Door Lock Error

F27

Washer-dryer combo shows F27 and may overfill or underfill; cycle may abort.

Overflow or Pressure Switch Calibration Error

F28

Washer-dryer combo displays F28 and may not start or may stop unexpectedly.

Serial Communication Error (UI to CCU)

F29

Washer-dryer combo shows F29 and door remains locked at end of cycle or will not unlock.

Door Unlock Error

F30

Washer-dryer combo displays F30 and may not detect correct water level or may stop filling.

Dispenser or Flow Meter Error (model-dependent)

F31

Washer-dryer combo shows F31 and may not spin or may spin erratically.

Motor Control or Speed Sensing Error

F34

Washer-dryer combo displays F34 and will not start; door lock error indicated.

Door Lock Circuit Fault

F35

Washer-dryer combo shows F35 and may not fill or may abort cycle shortly after starting.

Analog Pressure Sensor Error

F36

Washer-dryer combo displays F36 and may not start or may stop unexpectedly.

Door Lock or Control Board Error (model-dependent)

F40

Washer-dryer combo shows F40 and may not start; communication or power issue indicated.

ACU (Appliance Control Unit) Communication or Power Fault

F70

Washer-dryer combo displays F70 and may be unresponsive or stuck.

Central Control Unit (CCU) / User Interface Communication Error

F71

Washer-dryer combo shows F71 and may not respond to button presses correctly.

User Interface or Button Stuck Error

Symptom

Washer-dryer combo does not dry clothes; clothes remain wet and cold after drying cycle.

No Heat in Dryer

Symptom

Washer-dryer combo door will not open at end of cycle; no error code displayed.

Door Stuck Locked

Symptom

Washer-dryer combo dries very poorly; cycles complete but clothes are still damp and drying takes much longer than normal.

Poor Drying Performance

Symptom

Washer-dryer combo emits a burning smell during wash or dry cycles.

Overheating or Electrical Burning Odor

Symptom

Washer-dryer combo fills with water but will not agitate or tumble during wash.

No Wash Agitation / Tumble

Symptom

Washer-dryer combo has a strong musty or moldy odor inside the drum.

Biofilm and Mold Build-Up

Symptom

Washer-dryer combo is very noisy during spin; loud rumbling, roaring, or grinding from the drum area.

Tub Bearing or Drum Support Failure

Symptom

Washer-dryer combo leaks water only during drying cycle; water appears at front or bottom.

Condensing Dryer System Leak

Symptom

Washer-dryer combo leaks water onto the floor during wash or rinse.

Water Leak During Wash Cycle

Symptom

Washer-dryer combo makes loud banging or knocking noises during spin; unit may move or walk across the floor.

Excessive Vibration / Out-of-Balance Condition

Symptom

Washer-dryer combo overfills or continues filling with water even when powered off.

Overfilling / Inlet Valve Stuck Open

Symptom

Washer-dryer combo stops mid-cycle and will not resume; lights may remain on but no progress.

Cycle Stalling / Control Logic Issue

Symptom

Washer-dryer combo takes in very little or no water; cycles stall at the beginning.

No or Slow Fill

Symptom

Washer-dryer combo will not power on at all; no lights or display, unit appears dead.

No Power / Dead Appliance

Symptom

Washer-dryer combo will not spin or spins very slowly; clothes come out very wet.

No or Poor Spin Performance