Teka Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Induction hob zone will not heat, display shows E1 when trying to start a cooking zone.
Pan Detection / Cookware Recognition Fault
E2
Induction hob zone shuts down shortly after starting and displays E2.
Induction Zone Overheating / Temperature Sensor Fault
E3
Induction hob displays E3 and refuses to start or shuts down during use.
Supply Voltage Out of Range / Overvoltage Protection
E4
Induction hob shows E4 on one or more zones and they do not heat.
Induction Coil / Power Module Overcurrent Fault
E5
Induction hob displays E5 and zones shut down or cannot be activated.
Control Board Overheating / Internal Temperature Fault
E6
Induction hob shows E6 and does not respond to touch controls.
Touch Control Panel Communication Error
E7
Induction hob displays E7 and one or more zones are disabled.
Internal Configuration / EEPROM Error
E8
Induction hob shows E8 and zones cannot be used.
Power Stage Synchronization / Phase Detection Error
E9
Induction hob intermittently shuts down with E9 error.
Internal Sensor / Coil Identification Error
Er01
Ceramic electric hob shows Er01 and does not respond to touch controls.
Touch Control Panel Locked / Key Stuck
Er02
Ceramic hob shows Er02 and zones shut off during cooking.
Glass Surface Overtemperature / Sensor Fault
Er03
Ceramic hob shows Er03 and beeps continuously when trying to adjust power.
Multiple Key Press / Control Area Covered
Er04
Ceramic hob shows Er04 and one or more zones do not heat.
Power Relay / Heating Element Fault
Er05
Ceramic hob shows Er05 and all zones are disabled.
Internal Power Supply Fault
F0
Gas cooktop with electronic ignition shows F0 on integrated display and burners will not ignite.
Ignition System General Fault
F1
Gas cooktop display shows F1 and continuous clicking is heard even when knobs are in OFF position.
Stuck Ignition Switch / Shorted Spark Switch
F2
Gas cooktop with flame failure safety shows F2 and gas shuts off shortly after ignition.
Flame Failure Device (FFD) / Thermocouple Fault
F3
Gas cooktop shows F3 and one burner will not ignite, others work normally.
Individual Burner Ignition Failure
F4
Gas cooktop display shows F4 and all burners are disabled.
Gas Supply / Gas Valve Lockout
F5
Gas cooktop with digital timer shows F5 and timer functions are disabled.
Timer / User Interface Fault
F6
Gas cooktop shows F6 and beeps when attempting to ignite burners.
Child Lock / Safety Lock Active
Symptom
Continuous clicking from gas cooktop even when all burners are off.
Stuck Ignition Switch / Moisture Intrusion
Symptom
Control knobs on gas cooktop are stiff or difficult to turn.
Valve Spindle Binding
Symptom
Electric ceramic hob zone cycles on and off too quickly, not reaching set temperature.
Faulty Energy Regulator / Thermostat
Symptom
Electric ceramic hob zone does not heat at all, other zones work.
Single Radiant Element Failure
Symptom
Electric hob indicator lights do not turn on even though zones heat normally.
Indicator Circuit Failure
Symptom
Gas burner clicks and sparks but flame does not appear or is very weak.
Insufficient Gas Flow to Burner
Symptom
Gas burner flame is yellow, noisy, or lifts off the burner.
Incorrect Combustion / Air-Gas Mixture Problem
Symptom
Gas burner ignites but goes out when the knob is released.
Flame Supervision Device Not Holding
Symptom
Gas burner will not ignite, no clicking sound and no spark at any burner.
Complete Ignition System Failure
Symptom
Glass surface of hob is cracked or shattered.
Ceramic Glass Damage
Symptom
Hob makes loud buzzing or humming noise at certain power levels.
Induction Coil / Power Electronics Vibration
Symptom
Hob surface around burners becomes discolored or stained.
Surface Finish Degradation
Symptom
Hob trips the household circuit breaker or RCD when turned on.
Electrical Short or Earth Leakage
Symptom
Induction hob does not detect some pans, shows low power or flashing power level but no heat.
Marginal Pan Detection / Coil Sensitivity Issue
Symptom
Induction hob randomly shuts off during cooking without showing an error code.
Thermal Cut-Out / Ventilation Problem
Symptom
Residual heat indicator stays on even when the zone is cold.
Residual Heat Sensor / Indicator Fault
Symptom
Smell of gas around Teka gas cooktop, especially when not in use.
Gas Leak in Supply or Valve
Symptom
Touch controls on hob are unresponsive or respond intermittently.
Touch Panel Sensitivity / Calibration Problem
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Induction hob zone will not heat, display shows E1 when trying to start a cooking zone.
|
Pan Detection / Cookware Recognition Fault | View Details |
| E2 |
Induction hob zone shuts down shortly after starting and displays E2.
|
Induction Zone Overheating / Temperature Sensor Fault | View Details |
| E3 |
Induction hob displays E3 and refuses to start or shuts down during use.
|
Supply Voltage Out of Range / Overvoltage Protection | View Details |
| E4 |
Induction hob shows E4 on one or more zones and they do not heat.
|
Induction Coil / Power Module Overcurrent Fault | View Details |
| E5 |
Induction hob displays E5 and zones shut down or cannot be activated.
|
Control Board Overheating / Internal Temperature Fault | View Details |
| E6 |
Induction hob shows E6 and does not respond to touch controls.
|
Touch Control Panel Communication Error | View Details |
| E7 |
Induction hob displays E7 and one or more zones are disabled.
|
Internal Configuration / EEPROM Error | View Details |
| E8 |
Induction hob shows E8 and zones cannot be used.
|
Power Stage Synchronization / Phase Detection Error | View Details |
| E9 |
Induction hob intermittently shuts down with E9 error.
|
Internal Sensor / Coil Identification Error | View Details |
| Er01 |
Ceramic electric hob shows Er01 and does not respond to touch controls.
|
Touch Control Panel Locked / Key Stuck | View Details |
| Er02 |
Ceramic hob shows Er02 and zones shut off during cooking.
|
Glass Surface Overtemperature / Sensor Fault | View Details |
| Er03 |
Ceramic hob shows Er03 and beeps continuously when trying to adjust power.
|
Multiple Key Press / Control Area Covered | View Details |
| Er04 |
Ceramic hob shows Er04 and one or more zones do not heat.
|
Power Relay / Heating Element Fault | View Details |
| Er05 |
Ceramic hob shows Er05 and all zones are disabled.
|
Internal Power Supply Fault | View Details |
| F0 |
Gas cooktop with electronic ignition shows F0 on integrated display and burners will not ignite.
|
Ignition System General Fault | View Details |
| F1 |
Gas cooktop display shows F1 and continuous clicking is heard even when knobs are in OFF position.
|
Stuck Ignition Switch / Shorted Spark Switch | View Details |
| F2 |
Gas cooktop with flame failure safety shows F2 and gas shuts off shortly after ignition.
|
Flame Failure Device (FFD) / Thermocouple Fault | View Details |
| F3 |
Gas cooktop shows F3 and one burner will not ignite, others work normally.
|
Individual Burner Ignition Failure | View Details |
| F4 |
Gas cooktop display shows F4 and all burners are disabled.
|
Gas Supply / Gas Valve Lockout | View Details |
| F5 |
Gas cooktop with digital timer shows F5 and timer functions are disabled.
|
Timer / User Interface Fault | View Details |
| F6 |
Gas cooktop shows F6 and beeps when attempting to ignite burners.
|
Child Lock / Safety Lock Active | View Details |
| – |
Continuous clicking from gas cooktop even when all burners are off.
|
Stuck Ignition Switch / Moisture Intrusion | View Details |
| – |
Control knobs on gas cooktop are stiff or difficult to turn.
|
Valve Spindle Binding | View Details |
| – |
Electric ceramic hob zone cycles on and off too quickly, not reaching set temperature.
|
Faulty Energy Regulator / Thermostat | View Details |
| – |
Electric ceramic hob zone does not heat at all, other zones work.
|
Single Radiant Element Failure | View Details |
| – |
Electric hob indicator lights do not turn on even though zones heat normally.
|
Indicator Circuit Failure | View Details |
| – |
Gas burner clicks and sparks but flame does not appear or is very weak.
|
Insufficient Gas Flow to Burner | View Details |
| – |
Gas burner flame is yellow, noisy, or lifts off the burner.
|
Incorrect Combustion / Air-Gas Mixture Problem | View Details |
| – |
Gas burner ignites but goes out when the knob is released.
|
Flame Supervision Device Not Holding | View Details |
| – |
Gas burner will not ignite, no clicking sound and no spark at any burner.
|
Complete Ignition System Failure | View Details |
| – |
Glass surface of hob is cracked or shattered.
|
Ceramic Glass Damage | View Details |
| – |
Hob makes loud buzzing or humming noise at certain power levels.
|
Induction Coil / Power Electronics Vibration | View Details |
| – |
Hob surface around burners becomes discolored or stained.
|
Surface Finish Degradation | View Details |
| – |
Hob trips the household circuit breaker or RCD when turned on.
|
Electrical Short or Earth Leakage | View Details |
| – |
Induction hob does not detect some pans, shows low power or flashing power level but no heat.
|
Marginal Pan Detection / Coil Sensitivity Issue | View Details |
| – |
Induction hob randomly shuts off during cooking without showing an error code.
|
Thermal Cut-Out / Ventilation Problem | View Details |
| – |
Residual heat indicator stays on even when the zone is cold.
|
Residual Heat Sensor / Indicator Fault | View Details |
| – |
Smell of gas around Teka gas cooktop, especially when not in use.
|
Gas Leak in Supply or Valve | View Details |
| – |
Touch controls on hob are unresponsive or respond intermittently.
|
Touch Panel Sensitivity / Calibration Problem | View Details |
No matching codes found
Advertisements