Swan Coffee Makers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Display shows E1 and brewing does not start or stops immediately on Swan digital coffee maker.
Water Reservoir Presence/Level Sensor Fault
E2
Display shows E2 and the Swan coffee maker will not heat or brew.
Thermistor / Temperature Sensor Fault
E3
Display shows E3 and brewing stops; sometimes accompanied by very hot steam or no heating at all on Swan coffee maker.
Overheat Protection / Thermal Cut-out Triggered
E4
Display shows E4 and the Swan coffee maker will not start brewing; sometimes accompanied by a clicking sound.
Pump / Flow Meter Fault
E5
Display shows E5 and the Swan coffee maker stops mid-cycle or will not start; often associated with lid or carafe not detected.
Lid / Carafe Safety Switch Fault
E6
Display shows E6 and the Swan coffee maker powers on but none of the buttons respond or brewing cannot be started.
Keypad / Touch Control Panel Fault
E7
Display shows E7 and the Swan coffee maker shuts down shortly after starting or will not complete a brew cycle.
Internal Overcurrent / Power Supply Fault
E8
Display shows E8 and the Swan coffee maker cannot complete a descaling or cleaning cycle.
Descale Program / Flow Timeout Fault
Symptom
Swan coffee maker brews but the coffee is lukewarm or not hot enough.
Underheating / Temperature Regulation Fault
Symptom
Swan coffee maker brews extremely slowly or only drips, taking much longer than normal.
Restricted Water Flow / Partial Blockage
Symptom
Swan coffee maker dispenses water into the drip tray or internally instead of through the brew head.
Internal Bypass or Hose Misrouting
Symptom
Swan coffee maker display or indicator lights flicker or dim during operation.
Unstable Power Supply / Loose Connection
Symptom
Swan coffee maker does not pump water at all; no water reaches the brew basket.
Pump Not Priming / Pump Failure
Symptom
Swan coffee maker drips coffee onto the warming plate even when the carafe is removed.
Drip-stop Valve Not Sealing
Symptom
Swan coffee maker emits a burning smell during operation.
Overheating or Electrical Insulation Breakdown
Symptom
Swan coffee maker emits excessive steam or sputters water violently from the brew head.
Overheating / Flash Boiling in Boiler
Symptom
Swan coffee maker leaks water from the bottom of the unit during or after brewing.
Internal Leak / Hose or Seal Failure
Symptom
Swan coffee maker makes loud banging, rattling, or buzzing noises during brewing.
Noisy Pump or Boiling / Cavitation
Symptom
Swan coffee maker overheats coffee on the warming plate, causing burnt taste.
Overheating Warming Plate
Symptom
Swan coffee maker powers on but will not start brewing when the start button is pressed.
Start Circuit / Safety Interlock Not Engaging
Symptom
Swan coffee maker produces a plastic or chemical taste in the coffee, especially when new.
Residue from Manufacturing / Contaminated Water Path
Symptom
Swan coffee maker produces very strong, bitter coffee even with normal coffee amounts.
Over-extraction / Slow Flow Through Grounds
Symptom
Swan coffee maker produces weak coffee even when using normal amounts of grounds.
Under-extraction / Incorrect Brew Ratio
Symptom
Swan coffee maker trips the household circuit breaker or RCD when turned on.
Earth Leakage / Short Circuit
Symptom
Swan coffee maker turns off mid-brew or randomly shuts down before the cycle is complete.
Intermittent Power Loss / Thermal Trip
Symptom
Swan coffee maker's auto-brew timer does not start brewing at the programmed time.
Timer / Program Execution Fault
Symptom
Swan coffee maker's carafe lid or handle becomes loose or wobbly.
Mechanical Wear of Carafe Components
Symptom
Swan coffee maker's clock or timer loses time or resets randomly.
Timer / Memory Power Loss
Symptom
Swan coffee maker's descaling indicator light stays on even after descaling.
Descale Indicator Not Resetting
Symptom
Swan coffee maker's hot plate does not keep coffee warm after brewing.
Warming Plate Not Heating
Symptom
Swan coffee maker's hot plate stays on indefinitely and does not turn off after the keep-warm period.
Warming Plate Stuck On
Symptom
Swan coffee maker's permanent metal filter mesh is torn or deformed.
Damaged Reusable Filter
Symptom
Swan coffee maker's water reservoir lid or body is cracked and leaks when filled.
Damaged Water Reservoir
Symptom
Swan drip coffee maker will not power on at all; no lights or display.
No Power / Dead Appliance
Symptom
Water leaks from the top of the Swan coffee maker around the filter basket area.
Overflow / Brew Head Seal Leak
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Display shows E1 and brewing does not start or stops immediately on Swan digital coffee maker.
|
Water Reservoir Presence/Level Sensor Fault | View Details |
| E2 |
Display shows E2 and the Swan coffee maker will not heat or brew.
|
Thermistor / Temperature Sensor Fault | View Details |
| E3 |
Display shows E3 and brewing stops; sometimes accompanied by very hot steam or no heating at all on Swan coffee maker.
|
Overheat Protection / Thermal Cut-out Triggered | View Details |
| E4 |
Display shows E4 and the Swan coffee maker will not start brewing; sometimes accompanied by a clicking sound.
|
Pump / Flow Meter Fault | View Details |
| E5 |
Display shows E5 and the Swan coffee maker stops mid-cycle or will not start; often associated with lid or carafe not detected.
|
Lid / Carafe Safety Switch Fault | View Details |
| E6 |
Display shows E6 and the Swan coffee maker powers on but none of the buttons respond or brewing cannot be started.
|
Keypad / Touch Control Panel Fault | View Details |
| E7 |
Display shows E7 and the Swan coffee maker shuts down shortly after starting or will not complete a brew cycle.
|
Internal Overcurrent / Power Supply Fault | View Details |
| E8 |
Display shows E8 and the Swan coffee maker cannot complete a descaling or cleaning cycle.
|
Descale Program / Flow Timeout Fault | View Details |
| – |
Swan coffee maker brews but the coffee is lukewarm or not hot enough.
|
Underheating / Temperature Regulation Fault | View Details |
| – |
Swan coffee maker brews extremely slowly or only drips, taking much longer than normal.
|
Restricted Water Flow / Partial Blockage | View Details |
| – |
Swan coffee maker dispenses water into the drip tray or internally instead of through the brew head.
|
Internal Bypass or Hose Misrouting | View Details |
| – |
Swan coffee maker display or indicator lights flicker or dim during operation.
|
Unstable Power Supply / Loose Connection | View Details |
| – |
Swan coffee maker does not pump water at all; no water reaches the brew basket.
|
Pump Not Priming / Pump Failure | View Details |
| – |
Swan coffee maker drips coffee onto the warming plate even when the carafe is removed.
|
Drip-stop Valve Not Sealing | View Details |
| – |
Swan coffee maker emits a burning smell during operation.
|
Overheating or Electrical Insulation Breakdown | View Details |
| – |
Swan coffee maker emits excessive steam or sputters water violently from the brew head.
|
Overheating / Flash Boiling in Boiler | View Details |
| – |
Swan coffee maker leaks water from the bottom of the unit during or after brewing.
|
Internal Leak / Hose or Seal Failure | View Details |
| – |
Swan coffee maker makes loud banging, rattling, or buzzing noises during brewing.
|
Noisy Pump or Boiling / Cavitation | View Details |
| – |
Swan coffee maker overheats coffee on the warming plate, causing burnt taste.
|
Overheating Warming Plate | View Details |
| – |
Swan coffee maker powers on but will not start brewing when the start button is pressed.
|
Start Circuit / Safety Interlock Not Engaging | View Details |
| – |
Swan coffee maker produces a plastic or chemical taste in the coffee, especially when new.
|
Residue from Manufacturing / Contaminated Water Path | View Details |
| – |
Swan coffee maker produces very strong, bitter coffee even with normal coffee amounts.
|
Over-extraction / Slow Flow Through Grounds | View Details |
| – |
Swan coffee maker produces weak coffee even when using normal amounts of grounds.
|
Under-extraction / Incorrect Brew Ratio | View Details |
| – |
Swan coffee maker trips the household circuit breaker or RCD when turned on.
|
Earth Leakage / Short Circuit | View Details |
| – |
Swan coffee maker turns off mid-brew or randomly shuts down before the cycle is complete.
|
Intermittent Power Loss / Thermal Trip | View Details |
| – |
Swan coffee maker's auto-brew timer does not start brewing at the programmed time.
|
Timer / Program Execution Fault | View Details |
| – |
Swan coffee maker's carafe lid or handle becomes loose or wobbly.
|
Mechanical Wear of Carafe Components | View Details |
| – |
Swan coffee maker's clock or timer loses time or resets randomly.
|
Timer / Memory Power Loss | View Details |
| – |
Swan coffee maker's descaling indicator light stays on even after descaling.
|
Descale Indicator Not Resetting | View Details |
| – |
Swan coffee maker's hot plate does not keep coffee warm after brewing.
|
Warming Plate Not Heating | View Details |
| – |
Swan coffee maker's hot plate stays on indefinitely and does not turn off after the keep-warm period.
|
Warming Plate Stuck On | View Details |
| – |
Swan coffee maker's permanent metal filter mesh is torn or deformed.
|
Damaged Reusable Filter | View Details |
| – |
Swan coffee maker's water reservoir lid or body is cracked and leaks when filled.
|
Damaged Water Reservoir | View Details |
| – |
Swan drip coffee maker will not power on at all; no lights or display.
|
No Power / Dead Appliance | View Details |
| – |
Water leaks from the top of the Swan coffee maker around the filter basket area.
|
Overflow / Brew Head Seal Leak | View Details |
No matching codes found
Advertisements