Gourmia
Gourmia Air Fryers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Air fryer will not start and displays E1 on the control panel.
Open or shorted temperature sensor (NTC thermistor) circuit
E2
Air fryer beeps and shows E2 shortly after starting a cooking cycle.
Over-temperature protection / high temperature sensor fault
E3
Display shows E3 and the air fryer will not heat.
Heating element open circuit or heater drive fault
E4
E4 appears on the display and the unit shuts off or will not start.
Over-voltage or power supply fault
E5
E5 error code appears and the air fryer stops heating mid-cycle.
Low-voltage or power drop detection
E6
E6 displays and the fan does not run, or the unit shuts down quickly after starting.
Fan motor fault or fan tachometer error
E7
E7 appears and the display becomes unresponsive or flickers.
Keypad or touch panel communication error
E8
E8 error code appears and the unit will not start a cooking cycle.
Door/basket detection switch fault
E9
E9 displays intermittently, often when the unit is hot or after long use.
Internal temperature overrun or sensor calibration error
EO
Display shows EO or 0E and the unit will not respond to input.
General control board initialization error
Symptom
Air fryer basket is difficult to insert or remove; it jams or scrapes.
Basket rail or latch misalignment
Symptom
Air fryer emits a burning plastic or electrical smell during use.
Overheating wiring or component insulation
Symptom
Air fryer emits a strong chemical or paint-like odor on first few uses.
Normal curing of non-stick coating and insulation (initial burn-in)
Symptom
Air fryer exterior becomes excessively hot to the touch during use.
Insulation or airflow issue
Symptom
Air fryer fan continues to run for a long time after cooking has finished.
Extended cool-down cycle or stuck fan relay
Symptom
Air fryer fan is very loud, rattling, or grinding during operation.
Convection fan imbalance or bearing wear
Symptom
Air fryer leaks grease or liquid onto the countertop during cooking.
Basket or pan seal failure / overflow
Symptom
Air fryer makes a high-pitched squealing noise when the fan runs.
Dry or failing fan motor bearings
Symptom
Air fryer powers on but does not heat; fan runs and timer counts down, food remains raw.
Heating element or heater circuit failure
Symptom
Air fryer takes much longer than normal to reach temperature or cook food.
Reduced heating efficiency
Symptom
Air fryer turns off mid-cycle and will not restart until it cools down.
Thermal overload / high-limit thermostat tripping
Symptom
Air fryer will not power on at all; no lights or display.
No power / dead unit
Symptom
Basket will not lock into place; unit will not start because it thinks the basket is open.
Basket latch or interlock failure
Symptom
Buttons on the control panel do not respond or respond intermittently.
Touch panel or keypad failure
Symptom
Condensation or steam drips from the front or sides of the air fryer.
Normal steam venting with poor placement or minor seal gaps
Symptom
Display and lights work, but pressing Start does nothing.
Start circuit or safety interlock not engaging
Symptom
Display is dim, flickering, or segments are missing.
LED display or LCD module failure
Symptom
Display shows incorrect temperature or time compared to settings (e.g., jumps or resets).
Control panel input or memory fault
Symptom
Food cooks unevenly; some areas are burnt while others are undercooked.
Airflow distribution or temperature regulation issue
Symptom
Interior light (if equipped) does not turn on, but unit otherwise works.
Lamp or LED failure
Symptom
Non-stick coating on basket or tray is peeling or flaking.
Coating degradation
Symptom
Timer counts down but fan and heater do not run; unit appears on but idle.
Control logic or relay drive failure
Symptom
Unit beeps repeatedly and will not start, even though everything appears normal.
Error state without visible code / alarm condition
Symptom
Unit emits a persistent rattling noise only when the heater cycles on.
Thermal expansion noise or loose heater mounting
Symptom
Unit produces visible smoke from the exhaust during normal cooking.
Excess grease burning on heater or food
Symptom
Unit randomly shuts off and restarts, resetting the timer.
Intermittent power or control reset
Symptom
Unit trips the household circuit breaker or GFCI when starting or during cooking.
Electrical short or ground fault
Symptom
Unit vibrates excessively or moves on the countertop during operation.
Mechanical imbalance or loose components
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Air fryer will not start and displays E1 on the control panel.
|
Open or shorted temperature sensor (NTC thermistor) circuit | View Details |
| E2 |
Air fryer beeps and shows E2 shortly after starting a cooking cycle.
|
Over-temperature protection / high temperature sensor fault | View Details |
| E3 |
Display shows E3 and the air fryer will not heat.
|
Heating element open circuit or heater drive fault | View Details |
| E4 |
E4 appears on the display and the unit shuts off or will not start.
|
Over-voltage or power supply fault | View Details |
| E5 |
E5 error code appears and the air fryer stops heating mid-cycle.
|
Low-voltage or power drop detection | View Details |
| E6 |
E6 displays and the fan does not run, or the unit shuts down quickly after starting.
|
Fan motor fault or fan tachometer error | View Details |
| E7 |
E7 appears and the display becomes unresponsive or flickers.
|
Keypad or touch panel communication error | View Details |
| E8 |
E8 error code appears and the unit will not start a cooking cycle.
|
Door/basket detection switch fault | View Details |
| E9 |
E9 displays intermittently, often when the unit is hot or after long use.
|
Internal temperature overrun or sensor calibration error | View Details |
| EO |
Display shows EO or 0E and the unit will not respond to input.
|
General control board initialization error | View Details |
| – |
Air fryer basket is difficult to insert or remove; it jams or scrapes.
|
Basket rail or latch misalignment | View Details |
| – |
Air fryer emits a burning plastic or electrical smell during use.
|
Overheating wiring or component insulation | View Details |
| – |
Air fryer emits a strong chemical or paint-like odor on first few uses.
|
Normal curing of non-stick coating and insulation (initial burn-in) | View Details |
| – |
Air fryer exterior becomes excessively hot to the touch during use.
|
Insulation or airflow issue | View Details |
| – |
Air fryer fan continues to run for a long time after cooking has finished.
|
Extended cool-down cycle or stuck fan relay | View Details |
| – |
Air fryer fan is very loud, rattling, or grinding during operation.
|
Convection fan imbalance or bearing wear | View Details |
| – |
Air fryer leaks grease or liquid onto the countertop during cooking.
|
Basket or pan seal failure / overflow | View Details |
| – |
Air fryer makes a high-pitched squealing noise when the fan runs.
|
Dry or failing fan motor bearings | View Details |
| – |
Air fryer powers on but does not heat; fan runs and timer counts down, food remains raw.
|
Heating element or heater circuit failure | View Details |
| – |
Air fryer takes much longer than normal to reach temperature or cook food.
|
Reduced heating efficiency | View Details |
| – |
Air fryer turns off mid-cycle and will not restart until it cools down.
|
Thermal overload / high-limit thermostat tripping | View Details |
| – |
Air fryer will not power on at all; no lights or display.
|
No power / dead unit | View Details |
| – |
Basket will not lock into place; unit will not start because it thinks the basket is open.
|
Basket latch or interlock failure | View Details |
| – |
Buttons on the control panel do not respond or respond intermittently.
|
Touch panel or keypad failure | View Details |
| – |
Condensation or steam drips from the front or sides of the air fryer.
|
Normal steam venting with poor placement or minor seal gaps | View Details |
| – |
Display and lights work, but pressing Start does nothing.
|
Start circuit or safety interlock not engaging | View Details |
| – |
Display is dim, flickering, or segments are missing.
|
LED display or LCD module failure | View Details |
| – |
Display shows incorrect temperature or time compared to settings (e.g., jumps or resets).
|
Control panel input or memory fault | View Details |
| – |
Food cooks unevenly; some areas are burnt while others are undercooked.
|
Airflow distribution or temperature regulation issue | View Details |
| – |
Interior light (if equipped) does not turn on, but unit otherwise works.
|
Lamp or LED failure | View Details |
| – |
Non-stick coating on basket or tray is peeling or flaking.
|
Coating degradation | View Details |
| – |
Timer counts down but fan and heater do not run; unit appears on but idle.
|
Control logic or relay drive failure | View Details |
| – |
Unit beeps repeatedly and will not start, even though everything appears normal.
|
Error state without visible code / alarm condition | View Details |
| – |
Unit emits a persistent rattling noise only when the heater cycles on.
|
Thermal expansion noise or loose heater mounting | View Details |
| – |
Unit produces visible smoke from the exhaust during normal cooking.
|
Excess grease burning on heater or food | View Details |
| – |
Unit randomly shuts off and restarts, resetting the timer.
|
Intermittent power or control reset | View Details |
| – |
Unit trips the household circuit breaker or GFCI when starting or during cooking.
|
Electrical short or ground fault | View Details |
| – |
Unit vibrates excessively or moves on the countertop during operation.
|
Mechanical imbalance or loose components | View Details |
No matching codes found
Advertisements