Electrolux Professional Dishwashers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Dishwasher will not start a cycle, display shows E01 shortly after pressing Start.
Water Inlet Timeout / No Fill
E02
Cycle stops early, dishwasher drains and displays E02.
Water Inlet Flow Error / Flow Meter Fault
E03
Dishwasher stops with water remaining in the sump, display shows E03.
Drain Timeout / No Drain
E04
Dishwasher stops during wash or rinse, shows E04 and may overfill or underfill.
Pressure Switch / Water Level Sensor Fault
E05
Dishwasher stops, does not heat water, and displays E05.
Heating Circuit Fault
E06
Dishwasher stops and displays E06, often early in the cycle.
NTC Temperature Sensor Error
E07
Dishwasher shows E07 and may not start or may stop mid-cycle.
Door Lock / Door Switch Fault
E08
Dishwasher displays E08 and may not fill correctly or may stop shortly after starting.
Circulation Pump / Motor Fault
E09
Dishwasher stops with E09, often associated with heating issues in models with integrated heater-pump.
Heater-Pump Assembly Fault
E10
Dishwasher shows E10 and may not start or may stop unexpectedly.
Mains Supply / Voltage Error
E11
Dishwasher displays E11, often related to turbidity or soil sensor issues.
Turbidity / Optical Soil Sensor Fault
E12
Dishwasher shows E12, often associated with rinse aid or detergent dosing systems on professional models.
Detergent / Rinse Aid Dosing Fault
E13
Dishwasher stops and displays E13, often linked to overfill or flooding.
Overfill Protection / Anti-Flood Activated
E14
Dishwasher displays E14 and may not start the wash phase.
Wash Pump Speed / Tachometer Error
E15
Dishwasher shows E15, often related to communication issues between control modules.
Communication Error (Main Board to User Interface or Auxiliary Board)
E16
Dishwasher displays E16 and may not accept input from buttons or touch panel.
User Interface / Keypad Fault
E17
Dishwasher shows E17, often associated with excessive foaming or unusual water level behavior.
Foam Detection / Abnormal Water Level
E18
Dishwasher displays E18, often related to drain pump overrun or siphoning issues.
Drain System Configuration Error
E19
Dishwasher shows E19, often linked to rinse temperature not reached within time.
Rinse Heating Timeout
E20
Dishwasher displays E20, often associated with circulation issues or blocked filters.
Circulation / Hydraulic Circuit Error
Symptom
Cloudy glasses and streaks on glassware after washing.
Glass Corrosion / Incorrect Chemical Balance
Symptom
Cycle times are much longer than normal with no error code.
Extended Cycle Duration
Symptom
Detergent tablet or powder remains in the dispenser at the end of the cycle.
Detergent Dispenser Not Opening / Poor Water Reach
Symptom
Dishes come out wet; poor drying performance.
Poor Drying / Condensation Issue
Symptom
Dishwasher does not drain completely; small pool of water remains in sump after cycle.
Partial Drain / Residual Water
Symptom
Dishwasher does not power on at all; no lights or display.
No Power / Dead Appliance
Symptom
Dishwasher fills with water but the wash pump does not run; dishes remain dirty and cold.
Circulation Pump Not Running
Symptom
Dishwasher is very noisy during wash; grinding or rattling sounds.
Mechanical Noise / Foreign Object in Pump
Symptom
Dishwasher leaks water from the bottom front of the door during operation.
Door Seal / Overflow Leak
Symptom
Dishwasher makes loud banging or knocking noises during operation.
Hydraulic Hammer / Loose Components
Symptom
Dishwasher powers on but will not start a cycle; Start button unresponsive, no error code.
Start Inhibit / Door or UI Logic Fault
Symptom
Dishwasher runs but dishes are not cleaned properly; spray arms barely move.
Low Wash Pressure / Restricted Spray
Symptom
Dishwasher vibrates excessively or moves during operation.
Excessive Vibration / Poor Installation
Symptom
Display or indicator lights flicker or reset randomly during operation.
Intermittent Power / Control Instability
Symptom
External chemical dosing pumps (detergent/rinse aid) do not run; no chemical drawn from containers.
External Dosing System Failure
Symptom
Plastic items warp or melt during cycles.
Excessive Temperature / Incorrect Loading
Symptom
Rinse aid is not being used; level never drops.
Rinse Aid Dosing Failure
Symptom
Rust spots appear on the interior tank or on racks.
Corrosion / Coating Damage
Symptom
Steam or hot moisture escapes from the top or sides of the door during operation.
Door Seal / Venting Issue
Symptom
Strong bad odor from inside the dishwasher, especially when opening the door after idle periods.
Odor / Bacterial Growth
Symptom
Water appears under or behind the dishwasher; base tray may fill and trigger anti-flood.
Internal Leak / Hose or Seal Failure
Symptom
White film or limescale deposits on dishes and inside the tank.
Limescale / Hard Water Residue
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Dishwasher will not start a cycle, display shows E01 shortly after pressing Start.
|
Water Inlet Timeout / No Fill | View Details |
| E02 |
Cycle stops early, dishwasher drains and displays E02.
|
Water Inlet Flow Error / Flow Meter Fault | View Details |
| E03 |
Dishwasher stops with water remaining in the sump, display shows E03.
|
Drain Timeout / No Drain | View Details |
| E04 |
Dishwasher stops during wash or rinse, shows E04 and may overfill or underfill.
|
Pressure Switch / Water Level Sensor Fault | View Details |
| E05 |
Dishwasher stops, does not heat water, and displays E05.
|
Heating Circuit Fault | View Details |
| E06 |
Dishwasher stops and displays E06, often early in the cycle.
|
NTC Temperature Sensor Error | View Details |
| E07 |
Dishwasher shows E07 and may not start or may stop mid-cycle.
|
Door Lock / Door Switch Fault | View Details |
| E08 |
Dishwasher displays E08 and may not fill correctly or may stop shortly after starting.
|
Circulation Pump / Motor Fault | View Details |
| E09 |
Dishwasher stops with E09, often associated with heating issues in models with integrated heater-pump.
|
Heater-Pump Assembly Fault | View Details |
| E10 |
Dishwasher shows E10 and may not start or may stop unexpectedly.
|
Mains Supply / Voltage Error | View Details |
| E11 |
Dishwasher displays E11, often related to turbidity or soil sensor issues.
|
Turbidity / Optical Soil Sensor Fault | View Details |
| E12 |
Dishwasher shows E12, often associated with rinse aid or detergent dosing systems on professional models.
|
Detergent / Rinse Aid Dosing Fault | View Details |
| E13 |
Dishwasher stops and displays E13, often linked to overfill or flooding.
|
Overfill Protection / Anti-Flood Activated | View Details |
| E14 |
Dishwasher displays E14 and may not start the wash phase.
|
Wash Pump Speed / Tachometer Error | View Details |
| E15 |
Dishwasher shows E15, often related to communication issues between control modules.
|
Communication Error (Main Board to User Interface or Auxiliary Board) | View Details |
| E16 |
Dishwasher displays E16 and may not accept input from buttons or touch panel.
|
User Interface / Keypad Fault | View Details |
| E17 |
Dishwasher shows E17, often associated with excessive foaming or unusual water level behavior.
|
Foam Detection / Abnormal Water Level | View Details |
| E18 |
Dishwasher displays E18, often related to drain pump overrun or siphoning issues.
|
Drain System Configuration Error | View Details |
| E19 |
Dishwasher shows E19, often linked to rinse temperature not reached within time.
|
Rinse Heating Timeout | View Details |
| E20 |
Dishwasher displays E20, often associated with circulation issues or blocked filters.
|
Circulation / Hydraulic Circuit Error | View Details |
| – |
Cloudy glasses and streaks on glassware after washing.
|
Glass Corrosion / Incorrect Chemical Balance | View Details |
| – |
Cycle times are much longer than normal with no error code.
|
Extended Cycle Duration | View Details |
| – |
Detergent tablet or powder remains in the dispenser at the end of the cycle.
|
Detergent Dispenser Not Opening / Poor Water Reach | View Details |
| – |
Dishes come out wet; poor drying performance.
|
Poor Drying / Condensation Issue | View Details |
| – |
Dishwasher does not drain completely; small pool of water remains in sump after cycle.
|
Partial Drain / Residual Water | View Details |
| – |
Dishwasher does not power on at all; no lights or display.
|
No Power / Dead Appliance | View Details |
| – |
Dishwasher fills with water but the wash pump does not run; dishes remain dirty and cold.
|
Circulation Pump Not Running | View Details |
| – |
Dishwasher is very noisy during wash; grinding or rattling sounds.
|
Mechanical Noise / Foreign Object in Pump | View Details |
| – |
Dishwasher leaks water from the bottom front of the door during operation.
|
Door Seal / Overflow Leak | View Details |
| – |
Dishwasher makes loud banging or knocking noises during operation.
|
Hydraulic Hammer / Loose Components | View Details |
| – |
Dishwasher powers on but will not start a cycle; Start button unresponsive, no error code.
|
Start Inhibit / Door or UI Logic Fault | View Details |
| – |
Dishwasher runs but dishes are not cleaned properly; spray arms barely move.
|
Low Wash Pressure / Restricted Spray | View Details |
| – |
Dishwasher vibrates excessively or moves during operation.
|
Excessive Vibration / Poor Installation | View Details |
| – |
Display or indicator lights flicker or reset randomly during operation.
|
Intermittent Power / Control Instability | View Details |
| – |
External chemical dosing pumps (detergent/rinse aid) do not run; no chemical drawn from containers.
|
External Dosing System Failure | View Details |
| – |
Plastic items warp or melt during cycles.
|
Excessive Temperature / Incorrect Loading | View Details |
| – |
Rinse aid is not being used; level never drops.
|
Rinse Aid Dosing Failure | View Details |
| – |
Rust spots appear on the interior tank or on racks.
|
Corrosion / Coating Damage | View Details |
| – |
Steam or hot moisture escapes from the top or sides of the door during operation.
|
Door Seal / Venting Issue | View Details |
| – |
Strong bad odor from inside the dishwasher, especially when opening the door after idle periods.
|
Odor / Bacterial Growth | View Details |
| – |
Water appears under or behind the dishwasher; base tray may fill and trigger anti-flood.
|
Internal Leak / Hose or Seal Failure | View Details |
| – |
White film or limescale deposits on dishes and inside the tank.
|
Limescale / Hard Water Residue | View Details |
No matching codes found
Advertisements