Miele Ranges & Cooktops Error Codes

E2

E2 error on induction cooktop; specific zone or entire unit shuts down.

Temperature Sensor Fault on Induction Module

E3

E3 error on induction cooktop; zone shuts off at high power or after extended use.

Overtemperature Protection Triggered

E4

E4 error on induction cooktop; one or more zones inoperative.

Internal Induction Module Error

E5

E5 error on induction cooktop; often associated with supply voltage issues.

Supply Voltage Out of Range

E6

E6 error on induction cooktop; may indicate communication issues between user interface and power module.

Cooktop Internal Communication Error

F0

Cooktop or range display shows F0 and beeps; some or all cooking zones shut off.

Keypad / Touch Control Stuck or Shorted

F1

Range or cooktop displays F1 and disables some functions; may occur at power‑on self test.

Internal Control Board Fault / EEPROM Error

F10

F10 error; induction cooktop zones may not heat or may shut down; fan may run at high speed.

Induction Power Module Overtemperature

F2

Display shows F2; oven or cooktop may shut down or limit power; often associated with overheating.

Overtemperature Fault / Sensor Out of Range

F20

F20 displayed on induction cooktop; one or more zones do not heat; audible beeps when pan is placed.

Pan Detection / Induction Coil Fault

F3

F3 displayed; oven will not heat correctly or shuts off; may appear shortly after starting a heating cycle.

Oven Temperature Sensor Short Circuit

F30

F30 error on induction cooktop; specific zone shuts down shortly after activation.

IGBT / Power Transistor Overcurrent or Short

F4

F4 error; oven or cooktop heating disabled; may be intermittent depending on temperature.

Oven Temperature Sensor Open Circuit

F40

F40 displayed; cooktop or range may not start; sometimes appears after installation or power outage.

Phase / Frequency / Mains Configuration Error

F47

F47 error on induction cooktop; entire unit or multiple zones inoperative.

DC Bus / Internal Power Supply Fault

F5

F5 displayed; oven fan or cooling system not operating correctly; oven may overheat or shut down.

Cooling Fan or Convection Fan Fault

F50

F50 error; gas cooktop with electronic ignition fails to ignite or keeps sparking.

Ignition System Fault

F51

F51 error; gas cooktop burners ignite but clicking continues, or flame detection unreliable.

Flame Supervision / Flame Detection Fault

F6

F6 error; oven or cooktop may not respond correctly to user inputs; display anomalies possible.

User Interface Communication Error

F60

F60 error; oven or range network features (e.g., Miele@home) not available; may not affect basic cooking.

Communication Module / Network Fault

F7

F7 displayed; oven may not heat or may shut down unexpectedly; sometimes associated with relay clicking.

Relay or Power Module Fault

F70

F70 error; oven or range may lock out some functions; often indicates watchdog or software fault.

Control Software Watchdog Error

F8

F8 error; oven door lock may not operate correctly during pyrolytic self‑clean; cycle aborted.

Door Lock Mechanism Fault

F9

F9 displayed; oven may not start or may shut down; sometimes associated with power supply issues.

Mains Voltage / Power Supply Fault

F90

F90 error; oven door will not lock or unlock properly, especially around self‑clean cycles.

Door Motor Positioning Error

Symptom

Cooktop glass ceramic surface on Miele electric or induction unit is cracked or shattered.

Glass Ceramic Top Damage

Symptom

Cooktop knobs on Miele gas range are hard to turn or feel gritty; flame control is jerky.

Gas Valve Stem Binding / Contamination

Symptom

Electric oven in Miele range does not heat at all; display and lights work normally.

No Heat / Open Heating Circuit

Symptom

Excessive clicking or buzzing noise from Miele induction cooktop during operation.

Induction Acoustic Noise / Coil or Pan Interaction

Symptom

Excessive heat felt on control panel or adjacent cabinetry when oven is in use on Miele range.

Cooling / Ventilation System Ineffective

Symptom

Gas burner clicks (sparks) but will not light or lights slowly; weak or uneven flame on Miele gas cooktop.

Restricted Gas Flow / Burner Contamination

Symptom

Gas burner ignites but keeps clicking; ignition continues even with stable flame on Miele gas cooktop.

Flame Detection / Ignition Switch Stuck

Symptom

Gas burner will not ignite (no clicking or spark, no flame) on Miele gas cooktop or gas range top.

Ignition System Inoperative

Symptom

Induction cooktop shuts off unexpectedly during cooking with no error code, often at high power.

Thermal Overload / Ventilation Issue

Symptom

Induction cooktop zone does not heat; display shows normal power level but pan remains cold (no specific error code).

Induction Zone Power Failure

Symptom

Oven door will not close fully or sits crooked on Miele range.

Door Hinge / Alignment Fault

Symptom

Oven door will not open after self‑clean cycle has completed and oven is cool.

Door Lock Stuck Closed

Symptom

Oven emits smoke or burning smell during normal cooking (not first‑time burn‑in) on Miele range.

Contamination / Overheating of Residues

Symptom

Oven fan (convection) not running; convection mode ineffective on Miele range.

Convection Fan Failure

Symptom

Oven heats but does not reach or maintain set temperature; food undercooked or overcooked.

Temperature Regulation / Calibration Fault

Symptom

Oven light does not work but oven heats normally.

Oven Cavity Illumination Failure

Symptom

Oven or cooktop control panel buttons or touch keys on Miele range are unresponsive or intermittently respond.

User Interface / Touch Panel Fault

Symptom

Range clock and display on Miele unit are blank; oven and cooktop do not operate.

No Power to Control / Internal Fuse Blown

Symptom

Strong gas smell around Miele gas cooktop or range, especially when burners are off.

Gas Leak / Valve or Connection Fault