Proline
Proline Washer-Dryer Combos Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Washer-dryer will not start; display shows E01 and door symbol flashes.
Door Lock Failure
E02
Washer-dryer does not fill with water or fills very slowly; E02 displayed after a few minutes.
Water Inlet Timeout / Fill Error
E03
Washer-dryer does not drain; water remains in drum and E03 is displayed.
Drain Pump Failure / Drain Timeout
E04
Machine overfills or shows E04; water level appears too high or water may leak from door.
Overfill / Pressure System Fault
E05
Washer-dryer stops heating during wash; program continues with cold water and E05 is displayed.
Wash Heating Circuit Fault
E06
Drying cycle does not heat; clothes remain wet and cool, E06 appears during or after drying.
Dryer Heating Circuit Fault
E07
Drum does not turn during wash or dry; humming noise may be heard, E07 displayed.
Drive Motor / Belt Fault
E08
Machine attempts to spin but stops; E08 displayed, sometimes with heavy vibration beforehand.
Unbalanced Load / Spin Protection Fault
E09
Washer-dryer stops mid-cycle with E09; drum may not move or moves erratically.
Motor Tachometer / Speed Feedback Fault
E10
Washer-dryer stops with E10; often associated with water inlet or level issues at the start of cycle.
General Water Supply / Level Fault
E11
Drying cycle stops early with E11; clothes are damp and cycle time seems incorrect.
Dryer Moisture / Temperature Sensing Fault
E12
Drying performance is poor; E12 displayed, often with long drying times and hot cabinet.
Condenser / Airflow Blockage
E13
Water leak detected; machine may stop and display E13, sometimes with water in base tray.
Leak Detection / Overflow Protection
E14
Washer-dryer will not start; E14 displayed, often associated with control or communication issues.
Main Control Board / User Interface Communication Fault
E15
Washer-dryer trips the household breaker or shows E15 related to power issues.
Power Supply / Overcurrent Fault
E16
Washer-dryer door will not unlock at end of cycle; E16 displayed.
Door Unlock Timeout / Lock Stuck
E17
Washer-dryer displays E17 and stops; often related to overheating during drying.
Dryer Overheat Protection Activated
E18
Washer-dryer shows E18 and will not start; often associated with low or high mains voltage conditions.
Mains Voltage Out of Range
E19
Washer-dryer displays E19; some functions may still work intermittently.
EEPROM / Configuration Error
Symptom
Drying cycle runs but clothes remain damp or take much longer than usual to dry.
Reduced Drying Efficiency
Symptom
Washer-dryer combo will not power on at all; no lights or display, no response to buttons.
No Power / Dead Appliance
Symptom
Washer-dryer displays incorrect time remaining or frequently changes the remaining time during cycles.
Load Sensing / Adaptive Control Behavior
Symptom
Washer-dryer door glass becomes excessively hot during drying.
Dryer Airflow Restriction / Overheating at Door
Symptom
Washer-dryer door is difficult to open or close; latch feels stiff or misaligned.
Door Latch / Hinge Misalignment
Symptom
Washer-dryer emits a burning smell during wash or dry cycles.
Overheating / Electrical or Mechanical Friction
Symptom
Washer-dryer fills and drains but drum does not turn during wash or spin; no error code shown.
Mechanical Drive Failure
Symptom
Washer-dryer has a persistent musty or moldy odor, especially when the door is opened.
Biofilm / Mold Build-up
Symptom
Washer-dryer intermittently stops mid-cycle without draining or spinning; no error code.
Intermittent Control or Power Interruption
Symptom
Washer-dryer is extremely noisy during spin; rumbling, grinding, or roaring sound from drum area.
Drum Bearing Failure
Symptom
Washer-dryer leaks water from the front door area during wash.
Door Seal (Gasket) Leak
Symptom
Washer-dryer leaks water from the rear or underneath during wash or spin.
Internal Hose or Component Leak
Symptom
Washer-dryer leaves clothes hot and very creased after drying; cycle may run too long.
Dryer Temperature Regulation Fault
Symptom
Washer-dryer leaves clothes soaking wet at the end of cycle; drum spins slowly or not at full speed, no error code.
Poor Spin Performance
Symptom
Washer-dryer leaves detergent or fabric softener in the drawer at the end of the cycle.
Dispenser Drawer Water Flow Problem
Symptom
Washer-dryer makes a clicking or knocking noise during drum rotation at low speed.
Foreign Object in Drum or Tub
Symptom
Washer-dryer occasionally leaves small puddles of water inside the drum after drying.
Condensation / Incomplete Pump-out After Drying
Symptom
Washer-dryer powers on but will not start any program; Start button unresponsive, no error code.
User Interface / Control Lock Issue
Symptom
Washer-dryer vibrates excessively or "walks" across the floor during spin.
Excessive Vibration / Suspension Wear
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Washer-dryer will not start; display shows E01 and door symbol flashes.
|
Door Lock Failure | View Details |
| E02 |
Washer-dryer does not fill with water or fills very slowly; E02 displayed after a few minutes.
|
Water Inlet Timeout / Fill Error | View Details |
| E03 |
Washer-dryer does not drain; water remains in drum and E03 is displayed.
|
Drain Pump Failure / Drain Timeout | View Details |
| E04 |
Machine overfills or shows E04; water level appears too high or water may leak from door.
|
Overfill / Pressure System Fault | View Details |
| E05 |
Washer-dryer stops heating during wash; program continues with cold water and E05 is displayed.
|
Wash Heating Circuit Fault | View Details |
| E06 |
Drying cycle does not heat; clothes remain wet and cool, E06 appears during or after drying.
|
Dryer Heating Circuit Fault | View Details |
| E07 |
Drum does not turn during wash or dry; humming noise may be heard, E07 displayed.
|
Drive Motor / Belt Fault | View Details |
| E08 |
Machine attempts to spin but stops; E08 displayed, sometimes with heavy vibration beforehand.
|
Unbalanced Load / Spin Protection Fault | View Details |
| E09 |
Washer-dryer stops mid-cycle with E09; drum may not move or moves erratically.
|
Motor Tachometer / Speed Feedback Fault | View Details |
| E10 |
Washer-dryer stops with E10; often associated with water inlet or level issues at the start of cycle.
|
General Water Supply / Level Fault | View Details |
| E11 |
Drying cycle stops early with E11; clothes are damp and cycle time seems incorrect.
|
Dryer Moisture / Temperature Sensing Fault | View Details |
| E12 |
Drying performance is poor; E12 displayed, often with long drying times and hot cabinet.
|
Condenser / Airflow Blockage | View Details |
| E13 |
Water leak detected; machine may stop and display E13, sometimes with water in base tray.
|
Leak Detection / Overflow Protection | View Details |
| E14 |
Washer-dryer will not start; E14 displayed, often associated with control or communication issues.
|
Main Control Board / User Interface Communication Fault | View Details |
| E15 |
Washer-dryer trips the household breaker or shows E15 related to power issues.
|
Power Supply / Overcurrent Fault | View Details |
| E16 |
Washer-dryer door will not unlock at end of cycle; E16 displayed.
|
Door Unlock Timeout / Lock Stuck | View Details |
| E17 |
Washer-dryer displays E17 and stops; often related to overheating during drying.
|
Dryer Overheat Protection Activated | View Details |
| E18 |
Washer-dryer shows E18 and will not start; often associated with low or high mains voltage conditions.
|
Mains Voltage Out of Range | View Details |
| E19 |
Washer-dryer displays E19; some functions may still work intermittently.
|
EEPROM / Configuration Error | View Details |
| – |
Drying cycle runs but clothes remain damp or take much longer than usual to dry.
|
Reduced Drying Efficiency | View Details |
| – |
Washer-dryer combo will not power on at all; no lights or display, no response to buttons.
|
No Power / Dead Appliance | View Details |
| – |
Washer-dryer displays incorrect time remaining or frequently changes the remaining time during cycles.
|
Load Sensing / Adaptive Control Behavior | View Details |
| – |
Washer-dryer door glass becomes excessively hot during drying.
|
Dryer Airflow Restriction / Overheating at Door | View Details |
| – |
Washer-dryer door is difficult to open or close; latch feels stiff or misaligned.
|
Door Latch / Hinge Misalignment | View Details |
| – |
Washer-dryer emits a burning smell during wash or dry cycles.
|
Overheating / Electrical or Mechanical Friction | View Details |
| – |
Washer-dryer fills and drains but drum does not turn during wash or spin; no error code shown.
|
Mechanical Drive Failure | View Details |
| – |
Washer-dryer has a persistent musty or moldy odor, especially when the door is opened.
|
Biofilm / Mold Build-up | View Details |
| – |
Washer-dryer intermittently stops mid-cycle without draining or spinning; no error code.
|
Intermittent Control or Power Interruption | View Details |
| – |
Washer-dryer is extremely noisy during spin; rumbling, grinding, or roaring sound from drum area.
|
Drum Bearing Failure | View Details |
| – |
Washer-dryer leaks water from the front door area during wash.
|
Door Seal (Gasket) Leak | View Details |
| – |
Washer-dryer leaks water from the rear or underneath during wash or spin.
|
Internal Hose or Component Leak | View Details |
| – |
Washer-dryer leaves clothes hot and very creased after drying; cycle may run too long.
|
Dryer Temperature Regulation Fault | View Details |
| – |
Washer-dryer leaves clothes soaking wet at the end of cycle; drum spins slowly or not at full speed, no error code.
|
Poor Spin Performance | View Details |
| – |
Washer-dryer leaves detergent or fabric softener in the drawer at the end of the cycle.
|
Dispenser Drawer Water Flow Problem | View Details |
| – |
Washer-dryer makes a clicking or knocking noise during drum rotation at low speed.
|
Foreign Object in Drum or Tub | View Details |
| – |
Washer-dryer occasionally leaves small puddles of water inside the drum after drying.
|
Condensation / Incomplete Pump-out After Drying | View Details |
| – |
Washer-dryer powers on but will not start any program; Start button unresponsive, no error code.
|
User Interface / Control Lock Issue | View Details |
| – |
Washer-dryer vibrates excessively or "walks" across the floor during spin.
|
Excessive Vibration / Suspension Wear | View Details |
No matching codes found
Advertisements