Severin
Severin Coffee Makers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Display shows E01 and brewing does not start or stops immediately after pressing the start button.
Water Tank Detection Fault
E02
Display shows E02 and the machine does not heat water; brewing is aborted.
Thermistor / Temperature Sensor Fault
E03
Display shows E03 and the machine overheats, produces steam instead of coffee, or shuts down shortly after starting.
Overtemperature / Thermal Cut-out Triggered
E04
Display shows E04 and the pump runs loudly but no water flows through the coffee outlet.
Water Circuit / Flow Meter Fault
E05
Display shows E05 and brewing stops; sometimes accompanied by unusual pump noise.
Pump Overload / Dry-Run Protection
E06
Display shows E06 and the grinder does not run when starting a coffee cycle on bean-to-cup models.
Grinder Motor Fault
E07
Display shows E07 and the brew unit does not move; you may hear clicking or a brief motor sound.
Brew Group Drive Motor / Position Error
E08
Display shows E08 and the machine leaks internally or stops mid-cycle with water under the unit.
Internal Leak / Pressure System Fault
E09
Display shows E09 and the machine does not detect the carafe or cup; brewing will not start.
Carafe / Cup Presence Sensor Fault
E10
Display shows E10 and the milk frothing function does not work on cappuccino/latte models.
Milk Frother Temperature / Steam Circuit Fault
E11
Display shows E11 and the descaling program cannot be started or is interrupted.
Descaling Program / Sensor Logic Error
E12
Display shows E12 and the machine shuts down shortly after switching on, sometimes with dim or flickering display.
Low Voltage / Power Supply Fault
E13
Display shows E13 and the warming plate does not heat after brewing.
Warming Plate Temperature Fault
E14
Display shows E14 and the clock or timer functions reset randomly or cannot be set.
Real-Time Clock / Memory Error
E15
Display shows E15 and the machine reports a general system error; no specific function works.
Generic System / Firmware Fault
Symptom
Anti-drip function does not work; coffee continues to drip when the carafe is removed.
Anti-Drip Valve Failure
Symptom
Built-in grinder is extremely loud, with metallic grinding or screeching noises.
Grinder Burr / Foreign Object Damage
Symptom
Built-in grinder runs but no ground coffee reaches the brew chamber.
Grinder Chute Blockage
Symptom
Buttons or touch controls do not respond or respond intermittently.
Control Panel / Keypad Failure
Symptom
Coffee is not hot enough even immediately after brewing.
Low Brew Temperature / Thermostat Miscalibration
Symptom
Coffee maker does not power on at all; no lights or display, even when plugged into a known-good outlet.
No Power / Dead Appliance
Symptom
Coffee maker heats but no water flows through the filter; you hear boiling or pump noise but nothing comes out.
Blocked Water Path / Scale Blockage
Symptom
Coffee maker powers on but will not start brewing when the start button is pressed.
Start Circuit / Control Panel Fault
Symptom
Coffee maker turns off or interrupts brewing mid-cycle without any error code.
Intermittent Power Loss / Thermal Cut-out
Symptom
Coffee maker vibrates excessively or moves on the countertop during brewing.
Mechanical Vibration / Pump Mounting Issue
Symptom
Coffee tastes weak or too strong despite using the same amount of coffee.
Incorrect Brew Volume / Flow Meter Drift
Symptom
Descale indicator remains on even after performing a descaling cycle.
Descale Indicator Reset Failure
Symptom
Display or indicator lights flicker or are very dim while the machine operates.
Voltage Drop / Power Supply Instability
Symptom
Excessive steam and gurgling noises; coffee drips very slowly and is over-extracted.
Restricted Outlet / Overheating in Thermoblock
Symptom
Glass carafe cracks or breaks during brewing.
Thermal Shock / Mechanical Stress
Symptom
Moldy or stale smell from the coffee maker or brewed coffee.
Microbial Growth in Water Path / Carafe
Symptom
Persistent plastic or chemical smell from a new Severin coffee maker after several uses.
New Appliance Odor / Residual Manufacturing Oils
Symptom
Strong burnt smell during brewing, sometimes with visible smoke from the base or back.
Electrical Overheating / Short Circuit
Symptom
Thermal carafe does not keep coffee hot for long; coffee cools within an hour.
Insulation Loss in Thermal Carafe
Symptom
Timer or auto-start function does not brew at the programmed time.
Timer Programming / RTC Drift
Symptom
Unusual humming or buzzing noise from the pump, with reduced or no water flow.
Pump Cavitation / Partial Blockage
Symptom
Visible mold or slime in the water tank or on the tank seals.
Contaminated Water Reservoir
Symptom
Warming plate does not keep coffee hot or turns off too soon.
Keep-Warm Control Fault
Symptom
Water does not heat; coffee is brewed with lukewarm or cold water.
Heating Element / Thermoblock Failure
Symptom
Water leaks from the bottom of the coffee maker during or after brewing.
Base Leak / Internal Hose or Seal Failure
Symptom
Water or steam leaks from the top or around the filter holder during brewing.
Brew Head Seal / Overpressure Leak
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Display shows E01 and brewing does not start or stops immediately after pressing the start button.
|
Water Tank Detection Fault | View Details |
| E02 |
Display shows E02 and the machine does not heat water; brewing is aborted.
|
Thermistor / Temperature Sensor Fault | View Details |
| E03 |
Display shows E03 and the machine overheats, produces steam instead of coffee, or shuts down shortly after starting.
|
Overtemperature / Thermal Cut-out Triggered | View Details |
| E04 |
Display shows E04 and the pump runs loudly but no water flows through the coffee outlet.
|
Water Circuit / Flow Meter Fault | View Details |
| E05 |
Display shows E05 and brewing stops; sometimes accompanied by unusual pump noise.
|
Pump Overload / Dry-Run Protection | View Details |
| E06 |
Display shows E06 and the grinder does not run when starting a coffee cycle on bean-to-cup models.
|
Grinder Motor Fault | View Details |
| E07 |
Display shows E07 and the brew unit does not move; you may hear clicking or a brief motor sound.
|
Brew Group Drive Motor / Position Error | View Details |
| E08 |
Display shows E08 and the machine leaks internally or stops mid-cycle with water under the unit.
|
Internal Leak / Pressure System Fault | View Details |
| E09 |
Display shows E09 and the machine does not detect the carafe or cup; brewing will not start.
|
Carafe / Cup Presence Sensor Fault | View Details |
| E10 |
Display shows E10 and the milk frothing function does not work on cappuccino/latte models.
|
Milk Frother Temperature / Steam Circuit Fault | View Details |
| E11 |
Display shows E11 and the descaling program cannot be started or is interrupted.
|
Descaling Program / Sensor Logic Error | View Details |
| E12 |
Display shows E12 and the machine shuts down shortly after switching on, sometimes with dim or flickering display.
|
Low Voltage / Power Supply Fault | View Details |
| E13 |
Display shows E13 and the warming plate does not heat after brewing.
|
Warming Plate Temperature Fault | View Details |
| E14 |
Display shows E14 and the clock or timer functions reset randomly or cannot be set.
|
Real-Time Clock / Memory Error | View Details |
| E15 |
Display shows E15 and the machine reports a general system error; no specific function works.
|
Generic System / Firmware Fault | View Details |
| – |
Anti-drip function does not work; coffee continues to drip when the carafe is removed.
|
Anti-Drip Valve Failure | View Details |
| – |
Built-in grinder is extremely loud, with metallic grinding or screeching noises.
|
Grinder Burr / Foreign Object Damage | View Details |
| – |
Built-in grinder runs but no ground coffee reaches the brew chamber.
|
Grinder Chute Blockage | View Details |
| – |
Buttons or touch controls do not respond or respond intermittently.
|
Control Panel / Keypad Failure | View Details |
| – |
Coffee is not hot enough even immediately after brewing.
|
Low Brew Temperature / Thermostat Miscalibration | View Details |
| – |
Coffee maker does not power on at all; no lights or display, even when plugged into a known-good outlet.
|
No Power / Dead Appliance | View Details |
| – |
Coffee maker heats but no water flows through the filter; you hear boiling or pump noise but nothing comes out.
|
Blocked Water Path / Scale Blockage | View Details |
| – |
Coffee maker powers on but will not start brewing when the start button is pressed.
|
Start Circuit / Control Panel Fault | View Details |
| – |
Coffee maker turns off or interrupts brewing mid-cycle without any error code.
|
Intermittent Power Loss / Thermal Cut-out | View Details |
| – |
Coffee maker vibrates excessively or moves on the countertop during brewing.
|
Mechanical Vibration / Pump Mounting Issue | View Details |
| – |
Coffee tastes weak or too strong despite using the same amount of coffee.
|
Incorrect Brew Volume / Flow Meter Drift | View Details |
| – |
Descale indicator remains on even after performing a descaling cycle.
|
Descale Indicator Reset Failure | View Details |
| – |
Display or indicator lights flicker or are very dim while the machine operates.
|
Voltage Drop / Power Supply Instability | View Details |
| – |
Excessive steam and gurgling noises; coffee drips very slowly and is over-extracted.
|
Restricted Outlet / Overheating in Thermoblock | View Details |
| – |
Glass carafe cracks or breaks during brewing.
|
Thermal Shock / Mechanical Stress | View Details |
| – |
Moldy or stale smell from the coffee maker or brewed coffee.
|
Microbial Growth in Water Path / Carafe | View Details |
| – |
Persistent plastic or chemical smell from a new Severin coffee maker after several uses.
|
New Appliance Odor / Residual Manufacturing Oils | View Details |
| – |
Strong burnt smell during brewing, sometimes with visible smoke from the base or back.
|
Electrical Overheating / Short Circuit | View Details |
| – |
Thermal carafe does not keep coffee hot for long; coffee cools within an hour.
|
Insulation Loss in Thermal Carafe | View Details |
| – |
Timer or auto-start function does not brew at the programmed time.
|
Timer Programming / RTC Drift | View Details |
| – |
Unusual humming or buzzing noise from the pump, with reduced or no water flow.
|
Pump Cavitation / Partial Blockage | View Details |
| – |
Visible mold or slime in the water tank or on the tank seals.
|
Contaminated Water Reservoir | View Details |
| – |
Warming plate does not keep coffee hot or turns off too soon.
|
Keep-Warm Control Fault | View Details |
| – |
Water does not heat; coffee is brewed with lukewarm or cold water.
|
Heating Element / Thermoblock Failure | View Details |
| – |
Water leaks from the bottom of the coffee maker during or after brewing.
|
Base Leak / Internal Hose or Seal Failure | View Details |
| – |
Water or steam leaks from the top or around the filter holder during brewing.
|
Brew Head Seal / Overpressure Leak | View Details |
No matching codes found
Advertisements