Frigidaire Gallery
Frigidaire Gallery Dishwashers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
CE
Dishwasher displays CE; may not start or may stop shortly after starting.
Configuration Error / Communication Error
CL
Display shows CL and cycle will not start; controls may be locked.
Child Lock / Control Lock Activated
dP
Display shows dP; dishwasher runs a short drain cycle instead of a full wash.
Drain Pump-Out Mode
ER
Display shows ER; buttons may not respond or may activate by themselves.
Keypad / User Interface Error
FL
Display shows FL; dishwasher may not start filling or may stop early in the cycle.
Water Fill Error / Flow Issue
HC
Display shows HC; dishwasher may pause or extend cycle; water may be excessively hot.
High Temperature / Overheat Condition
HO
Display shows HO; cycle time is extended; dishwasher appears to pause while waiting.
Heating Delay / Water Not Hot Enough
i10
Dishwasher stops shortly after starting; display shows i10; very little or no water enters the tub.
Water Inlet Timeout / Low Fill
i20
Dishwasher stops mid-cycle and displays i20; water remains in the bottom of the tub and may be backing up into the sink.
Drain System Restriction
i30
Dishwasher will not start and repeatedly tries to drain; display shows i30; sometimes a beeping pattern is heard.
Leak Detected / Overflow Protection Activated
i40
Dishwasher stops and displays i40; may be accompanied by poor draining or unusual fill/drain behavior.
Pressure Sensor / Pressure Switch Fault
i50
Dishwasher stops and displays i50; may not circulate or drain water; sometimes accompanied by humming from the bottom.
Motor or Pump Relay Failure
i60
Dishwasher displays i60 and may stop mid-cycle; water may be cold or excessively hot; dishes are not drying properly.
Heating System Fault
iC0
Dishwasher displays iC0; controls may be unresponsive or behave erratically.
Control Panel / User Interface Communication Error
LO
Display shows LO; dishwasher may not start or may pause; often indicates low rinse aid or door not fully closed depending on model.
Low Rinse Aid / Door Not Latched Indication
PF
Display shows PF; cycle may stop and need to be restarted after a power interruption.
Power Failure Indication
RA
Display shows RA or a rinse aid-related code; indicator light stays on even when filled.
Rinse Aid Sensor Fault
rA
Display shows rA; rinse aid indicator malfunction or calibration issue.
Rinse Aid Calibration / Sensor Error
UF
Dishwasher displays UF; drying performance is poor; fan may be noisy or not running.
Vent Fan Speed / Feedback Error
UO
Dishwasher displays UO and may pause; fan or vent may not operate correctly; poor drying performance.
Vent / Exhaust Fan Open or Fault
Symptom
Detergent pod or powder remains in the dispenser cup at the end of the cycle.
Detergent Dispenser Door Not Opening Properly
Symptom
Dishes are not getting clean; food remains stuck on after a full cycle.
Poor Wash Performance
Symptom
Dishes remain wet at the end of the cycle; poor drying performance.
Drying System Inefficiency
Symptom
Dishwasher does not drain; standing water remains in the bottom after cycle completes.
Drainage Failure
Symptom
Dishwasher door drops open quickly or will not stay in the partially open position.
Door Spring / Cable Failure
Symptom
Dishwasher fills with water but does not wash; spray arms do not move and dishes remain dirty.
Circulation Pump Failure
Symptom
Dishwasher has power but will not start a cycle; Start button beeps or flashes and nothing happens.
Door Not Latching / Start Inhibit
Symptom
Dishwasher is excessively loud or vibrating; unit may bang against cabinets during operation.
Installation / Mounting Vibration
Symptom
Dishwasher leaks from underneath; water appears on the floor under the unit.
Internal Hose or Pump Leak
Symptom
Dishwasher leaks water from the bottom front of the door during a cycle.
Door Seal / Overfill Leak
Symptom
Dishwasher makes loud grinding or rattling noises during wash or drain.
Foreign Object in Pump or Spray System
Symptom
Dishwasher runs for an unusually long time; cycle seems to never finish.
Extended Cycle Time / Heating or Fill Issue
Symptom
Dishwasher stops mid-cycle and will not advance; water may remain in tub.
Control Board or Sensor Interruption
Symptom
Dishwasher tub overfills with water; water level is above the heating element and may leak out.
Overfill / Water Level Control Failure
Symptom
Dishwasher will not power on at all; no lights or display; appears completely dead.
No Power / Dead Control
Symptom
Plastic items and top-rack dishes are not getting clean; lower rack items are cleaner.
Upper Spray Arm / Feed Tube Issue
Symptom
Top rack is difficult to slide or falls off the rails; rack does not stay level.
Rack Rail / Roller Failure
Symptom
Unpleasant odor coming from the dishwasher, especially when opening the door after it has been closed for a while.
Bacterial Growth / Food Debris Odor
Symptom
Visible rust spots or staining inside the stainless steel tub or on racks.
Corrosion / Coating Failure
Symptom
White film or cloudy residue on dishes and glassware after washing.
Hard Water Scaling / Detergent Residue
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| CE |
Dishwasher displays CE; may not start or may stop shortly after starting.
|
Configuration Error / Communication Error | View Details |
| CL |
Display shows CL and cycle will not start; controls may be locked.
|
Child Lock / Control Lock Activated | View Details |
| dP |
Display shows dP; dishwasher runs a short drain cycle instead of a full wash.
|
Drain Pump-Out Mode | View Details |
| ER |
Display shows ER; buttons may not respond or may activate by themselves.
|
Keypad / User Interface Error | View Details |
| FL |
Display shows FL; dishwasher may not start filling or may stop early in the cycle.
|
Water Fill Error / Flow Issue | View Details |
| HC |
Display shows HC; dishwasher may pause or extend cycle; water may be excessively hot.
|
High Temperature / Overheat Condition | View Details |
| HO |
Display shows HO; cycle time is extended; dishwasher appears to pause while waiting.
|
Heating Delay / Water Not Hot Enough | View Details |
| i10 |
Dishwasher stops shortly after starting; display shows i10; very little or no water enters the tub.
|
Water Inlet Timeout / Low Fill | View Details |
| i20 |
Dishwasher stops mid-cycle and displays i20; water remains in the bottom of the tub and may be backing up into the sink.
|
Drain System Restriction | View Details |
| i30 |
Dishwasher will not start and repeatedly tries to drain; display shows i30; sometimes a beeping pattern is heard.
|
Leak Detected / Overflow Protection Activated | View Details |
| i40 |
Dishwasher stops and displays i40; may be accompanied by poor draining or unusual fill/drain behavior.
|
Pressure Sensor / Pressure Switch Fault | View Details |
| i50 |
Dishwasher stops and displays i50; may not circulate or drain water; sometimes accompanied by humming from the bottom.
|
Motor or Pump Relay Failure | View Details |
| i60 |
Dishwasher displays i60 and may stop mid-cycle; water may be cold or excessively hot; dishes are not drying properly.
|
Heating System Fault | View Details |
| iC0 |
Dishwasher displays iC0; controls may be unresponsive or behave erratically.
|
Control Panel / User Interface Communication Error | View Details |
| LO |
Display shows LO; dishwasher may not start or may pause; often indicates low rinse aid or door not fully closed depending on model.
|
Low Rinse Aid / Door Not Latched Indication | View Details |
| PF |
Display shows PF; cycle may stop and need to be restarted after a power interruption.
|
Power Failure Indication | View Details |
| RA |
Display shows RA or a rinse aid-related code; indicator light stays on even when filled.
|
Rinse Aid Sensor Fault | View Details |
| rA |
Display shows rA; rinse aid indicator malfunction or calibration issue.
|
Rinse Aid Calibration / Sensor Error | View Details |
| UF |
Dishwasher displays UF; drying performance is poor; fan may be noisy or not running.
|
Vent Fan Speed / Feedback Error | View Details |
| UO |
Dishwasher displays UO and may pause; fan or vent may not operate correctly; poor drying performance.
|
Vent / Exhaust Fan Open or Fault | View Details |
| – |
Detergent pod or powder remains in the dispenser cup at the end of the cycle.
|
Detergent Dispenser Door Not Opening Properly | View Details |
| – |
Dishes are not getting clean; food remains stuck on after a full cycle.
|
Poor Wash Performance | View Details |
| – |
Dishes remain wet at the end of the cycle; poor drying performance.
|
Drying System Inefficiency | View Details |
| – |
Dishwasher does not drain; standing water remains in the bottom after cycle completes.
|
Drainage Failure | View Details |
| – |
Dishwasher door drops open quickly or will not stay in the partially open position.
|
Door Spring / Cable Failure | View Details |
| – |
Dishwasher fills with water but does not wash; spray arms do not move and dishes remain dirty.
|
Circulation Pump Failure | View Details |
| – |
Dishwasher has power but will not start a cycle; Start button beeps or flashes and nothing happens.
|
Door Not Latching / Start Inhibit | View Details |
| – |
Dishwasher is excessively loud or vibrating; unit may bang against cabinets during operation.
|
Installation / Mounting Vibration | View Details |
| – |
Dishwasher leaks from underneath; water appears on the floor under the unit.
|
Internal Hose or Pump Leak | View Details |
| – |
Dishwasher leaks water from the bottom front of the door during a cycle.
|
Door Seal / Overfill Leak | View Details |
| – |
Dishwasher makes loud grinding or rattling noises during wash or drain.
|
Foreign Object in Pump or Spray System | View Details |
| – |
Dishwasher runs for an unusually long time; cycle seems to never finish.
|
Extended Cycle Time / Heating or Fill Issue | View Details |
| – |
Dishwasher stops mid-cycle and will not advance; water may remain in tub.
|
Control Board or Sensor Interruption | View Details |
| – |
Dishwasher tub overfills with water; water level is above the heating element and may leak out.
|
Overfill / Water Level Control Failure | View Details |
| – |
Dishwasher will not power on at all; no lights or display; appears completely dead.
|
No Power / Dead Control | View Details |
| – |
Plastic items and top-rack dishes are not getting clean; lower rack items are cleaner.
|
Upper Spray Arm / Feed Tube Issue | View Details |
| – |
Top rack is difficult to slide or falls off the rails; rack does not stay level.
|
Rack Rail / Roller Failure | View Details |
| – |
Unpleasant odor coming from the dishwasher, especially when opening the door after it has been closed for a while.
|
Bacterial Growth / Food Debris Odor | View Details |
| – |
Visible rust spots or staining inside the stainless steel tub or on racks.
|
Corrosion / Coating Failure | View Details |
| – |
White film or cloudy residue on dishes and glassware after washing.
|
Hard Water Scaling / Detergent Residue | View Details |
No matching codes found
Advertisements