Midea Multicookers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
Multicooker will not start a program and displays E0 immediately after pressing Start.
Inner Pot / Lid Not Detected or Not Properly Installed
E1
Multicooker beeps and shows E1, will not heat or start cooking.
Open or Shorted Temperature Sensor (NTC) on Heating Plate
E10
E10 error code appears, often when starting or during a keep-warm cycle.
Keep-Warm Circuit or Low-Temperature Sensor Error
E11
E11 error appears and cooker will not enter pressure mode.
Lid Lock / Unlock Sensor Fault
E12
E12 error code appears, cooker beeps and stops; may occur randomly during cooking.
Internal EEPROM / Configuration Error
E13
E13 error appears when attempting to start high-pressure programs.
Secondary Overpressure / Safety Valve Monitoring Fault
E14
E14 error appears and cooker does not heat; display may still respond.
Heating Element Open Circuit
E15
E15 error appears shortly after powering on; no heating occurs.
Thermal Fuse or Overheat Protector Open
E16
E16 error appears when trying to start any program; cooker may click but not heat.
Heater Relay or Triac Failure
E17
E17 error appears and the display may flicker or reset.
Low Voltage / Brownout Detection
E18
E18 error appears when attempting to start a program; sometimes after a lid slam or drop.
Inner Pot Weight / Pressure Plate Sensor Error
E19
E19 error appears and the cooker may shut off unexpectedly during cooking.
Fan or Internal Cooling Failure (for models with cooling fan)
E2
E2 error appears during preheat or shortly after starting a program; cooker stops heating.
Overtemperature Protection / Sensor Out-of-Range
E20
E20 error appears on display; cooker may still respond to buttons but will not start cooking.
Keypad / Touch Panel Error
E3
E3 error appears and cooking stops, often during pressure build-up or sauté mode.
Overheat / Dry-Burn Protection Triggered
E4
E4 error code appears, cooker beeps and refuses to start or stops mid-cycle.
Pressure Sensor Fault or Abnormal Pressure Reading
E5
E5 error appears when trying to start a pressure program; cooker may not build pressure.
Abnormal Low Pressure / Lid Not Sealed
E6
E6 error code appears, often accompanied by rapid beeping; cooker will not start.
High Voltage / Power Supply Error
E7
E7 error appears intermittently, especially when the cooker is hot or after long use.
Lid Temperature Sensor Fault
E8
E8 error code appears and cooker stops; often associated with pressure programs.
Overpressure Protection Triggered
E9
E9 error appears and cooker refuses to start or aborts cooking.
Communication Error Between Control Panel and Main Board
Symptom
Condensation or water accumulates on the countertop around the cooker after use.
Excess Condensation / Drainage Issue
Symptom
Display lights up but buttons do not respond or respond intermittently.
Unresponsive Keypad / Control Panel
Symptom
Float valve does not rise; cooker never reaches pressure even though steam is present.
Float Valve Stuck or Leaking
Symptom
Inner pot coating is peeling or scratched; food sticks badly.
Nonstick Coating Degradation
Symptom
Keep Warm function overheats food, causing it to dry out or burn.
Keep-Warm Temperature Too High
Symptom
Lid is stuck and will not open after cooking; float valve appears down and no error code is shown.
Mechanical Lid Jam / Lock Mechanism Stuck
Symptom
Lid will not close or lock properly; cooker refuses to start pressure programs.
Lid Misalignment / Lock Failure
Symptom
Multicooker does not power on at all; no lights or display when plugged in.
No Power / Dead Appliance
Symptom
Multicooker overheats food, burning the bottom while top remains undercooked.
Overheating / Temperature Regulation Failure
Symptom
Multicooker powers on and counts down, but food remains undercooked; inner pot is only lukewarm.
Insufficient Heating / Weak Heating Element
Symptom
Multicooker trips the household circuit breaker or RCD when plugged in or when heating starts.
Electrical Short or Ground Fault
Symptom
Persistent sour or rancid odor from inside the cooker even after cleaning.
Odor Contamination / Bacterial Growth
Symptom
Steam continuously escapes from the steam release valve and pressure never builds.
Steam Release Valve Not Sealing
Symptom
Steam or liquid leaks from around the lid rim during pressure cooking.
Lid Seal Leakage Under Pressure
Symptom
Strong burnt smell or visible smoke from the cooker during use.
Burning Residue or Electrical Overheating
Symptom
Timer or cooking time is inaccurate; food finishes too early or too late compared to set time.
Timing / Control Logic Error
Symptom
Unusual loud clicking, buzzing, or humming noise during operation.
Abnormal Mechanical or Electrical Noise
Symptom
Water or starchy liquid drips from the sides or bottom of the cooker during or after cooking.
External Leakage / Condensation Mismanagement
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
Multicooker will not start a program and displays E0 immediately after pressing Start.
|
Inner Pot / Lid Not Detected or Not Properly Installed | View Details |
| E1 |
Multicooker beeps and shows E1, will not heat or start cooking.
|
Open or Shorted Temperature Sensor (NTC) on Heating Plate | View Details |
| E10 |
E10 error code appears, often when starting or during a keep-warm cycle.
|
Keep-Warm Circuit or Low-Temperature Sensor Error | View Details |
| E11 |
E11 error appears and cooker will not enter pressure mode.
|
Lid Lock / Unlock Sensor Fault | View Details |
| E12 |
E12 error code appears, cooker beeps and stops; may occur randomly during cooking.
|
Internal EEPROM / Configuration Error | View Details |
| E13 |
E13 error appears when attempting to start high-pressure programs.
|
Secondary Overpressure / Safety Valve Monitoring Fault | View Details |
| E14 |
E14 error appears and cooker does not heat; display may still respond.
|
Heating Element Open Circuit | View Details |
| E15 |
E15 error appears shortly after powering on; no heating occurs.
|
Thermal Fuse or Overheat Protector Open | View Details |
| E16 |
E16 error appears when trying to start any program; cooker may click but not heat.
|
Heater Relay or Triac Failure | View Details |
| E17 |
E17 error appears and the display may flicker or reset.
|
Low Voltage / Brownout Detection | View Details |
| E18 |
E18 error appears when attempting to start a program; sometimes after a lid slam or drop.
|
Inner Pot Weight / Pressure Plate Sensor Error | View Details |
| E19 |
E19 error appears and the cooker may shut off unexpectedly during cooking.
|
Fan or Internal Cooling Failure (for models with cooling fan) | View Details |
| E2 |
E2 error appears during preheat or shortly after starting a program; cooker stops heating.
|
Overtemperature Protection / Sensor Out-of-Range | View Details |
| E20 |
E20 error appears on display; cooker may still respond to buttons but will not start cooking.
|
Keypad / Touch Panel Error | View Details |
| E3 |
E3 error appears and cooking stops, often during pressure build-up or sauté mode.
|
Overheat / Dry-Burn Protection Triggered | View Details |
| E4 |
E4 error code appears, cooker beeps and refuses to start or stops mid-cycle.
|
Pressure Sensor Fault or Abnormal Pressure Reading | View Details |
| E5 |
E5 error appears when trying to start a pressure program; cooker may not build pressure.
|
Abnormal Low Pressure / Lid Not Sealed | View Details |
| E6 |
E6 error code appears, often accompanied by rapid beeping; cooker will not start.
|
High Voltage / Power Supply Error | View Details |
| E7 |
E7 error appears intermittently, especially when the cooker is hot or after long use.
|
Lid Temperature Sensor Fault | View Details |
| E8 |
E8 error code appears and cooker stops; often associated with pressure programs.
|
Overpressure Protection Triggered | View Details |
| E9 |
E9 error appears and cooker refuses to start or aborts cooking.
|
Communication Error Between Control Panel and Main Board | View Details |
| – |
Condensation or water accumulates on the countertop around the cooker after use.
|
Excess Condensation / Drainage Issue | View Details |
| – |
Display lights up but buttons do not respond or respond intermittently.
|
Unresponsive Keypad / Control Panel | View Details |
| – |
Float valve does not rise; cooker never reaches pressure even though steam is present.
|
Float Valve Stuck or Leaking | View Details |
| – |
Inner pot coating is peeling or scratched; food sticks badly.
|
Nonstick Coating Degradation | View Details |
| – |
Keep Warm function overheats food, causing it to dry out or burn.
|
Keep-Warm Temperature Too High | View Details |
| – |
Lid is stuck and will not open after cooking; float valve appears down and no error code is shown.
|
Mechanical Lid Jam / Lock Mechanism Stuck | View Details |
| – |
Lid will not close or lock properly; cooker refuses to start pressure programs.
|
Lid Misalignment / Lock Failure | View Details |
| – |
Multicooker does not power on at all; no lights or display when plugged in.
|
No Power / Dead Appliance | View Details |
| – |
Multicooker overheats food, burning the bottom while top remains undercooked.
|
Overheating / Temperature Regulation Failure | View Details |
| – |
Multicooker powers on and counts down, but food remains undercooked; inner pot is only lukewarm.
|
Insufficient Heating / Weak Heating Element | View Details |
| – |
Multicooker trips the household circuit breaker or RCD when plugged in or when heating starts.
|
Electrical Short or Ground Fault | View Details |
| – |
Persistent sour or rancid odor from inside the cooker even after cleaning.
|
Odor Contamination / Bacterial Growth | View Details |
| – |
Steam continuously escapes from the steam release valve and pressure never builds.
|
Steam Release Valve Not Sealing | View Details |
| – |
Steam or liquid leaks from around the lid rim during pressure cooking.
|
Lid Seal Leakage Under Pressure | View Details |
| – |
Strong burnt smell or visible smoke from the cooker during use.
|
Burning Residue or Electrical Overheating | View Details |
| – |
Timer or cooking time is inaccurate; food finishes too early or too late compared to set time.
|
Timing / Control Logic Error | View Details |
| – |
Unusual loud clicking, buzzing, or humming noise during operation.
|
Abnormal Mechanical or Electrical Noise | View Details |
| – |
Water or starchy liquid drips from the sides or bottom of the cooker during or after cooking.
|
External Leakage / Condensation Mismanagement | View Details |
No matching codes found
Advertisements