Saturn

Saturn Multicookers Error Codes

Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.

Advertisements
E1
Multicooker will not start a program; display shows E1 immediately after pressing Start.
Lid Position / Lid Lock Sensor Fault
E10
E10 appears when trying to start any program; unit beeps and cancels.
Lid Not Locked / Safety Interlock Error
E11
E11 appears during preheat; cooker fails to reach or maintain set temperature.
Upper Lid Temperature Sensor Fault (if equipped)
E12
E12 appears and the display backlight may flicker; unit may shut down unexpectedly.
Input Voltage / Overcurrent Protection Error
E13
E13 appears at the end of a pressure program; cooker does not switch to Keep Warm.
Abnormal Pressure Release / Exhaust Timeout
E14
E14 appears when selecting certain programs (e.g., Yogurt, Slow Cook) but not others.
Program-Specific Temperature Control Fault
E15
E15 appears and the cooker immediately shuts off heating; sometimes accompanied by a strong smell of burning.
Critical Overheat / Safety Shutdown
E2
Multicooker beeps and shows E2 shortly after starting a cooking program; heating stops.
Bottom Temperature Sensor (NTC) Open Circuit
E3
Display shows E3 during cooking; unit stops heating and may beep continuously.
Bottom Temperature Sensor (NTC) Short Circuit / Overheat Detection
E4
Multicooker shows E4 and refuses to start pressure or high-temperature programs.
Overtemperature / Dry-Boil Protection Triggered
E5
E5 appears when trying to use pressure-cooking modes; cooker does not build pressure.
Pressure Sensor Fault / Pressure Not Detected
E6
E6 error appears during pressure cooking; cooker stops and releases steam.
Overpressure / Pressure Sensor Overrange
E7
E7 appears and the cooker does not heat; sometimes accompanied by a clicking sound from inside.
Main Heating Element Circuit Fault
E8
E8 error appears; cooker powers on but none of the cooking programs will start.
Control Board / Power Supply Fault
E9
E9 appears intermittently; cooker may stop mid-cycle and reset.
Internal Communication Error / Sensor Bus Fault
Symptom
A strong burning smell is present during cooking, even when food is not burnt.
Internal Overheating / Residue on Heater
Symptom
Condensation or water drips down the sides of the cooker onto the countertop.
Condensation Collector / Steam Management Issue
Symptom
Cooling fan (on models equipped) is noisy or does not run, and the cooker overheats or shuts down.
Cooling Fan Failure
Symptom
Display is dim, segments are missing, or characters are unreadable.
Display Module / LED-LCD Failure
Symptom
Food burns on the bottom while the top remains undercooked.
Uneven Heating / Localized Overheating
Symptom
Inner lid plate is loose, rattles, or falls out when opening the lid.
Inner Lid Plate Retention Failure
Symptom
Inner pot is difficult to remove; it feels stuck to the heating plate after cooking.
Inner Pot Sticking to Heating Plate
Symptom
Keep Warm function overheats food, causing it to dry out or burn.
Keep Warm Temperature Too High
Symptom
Lid will not open after cooking; handle feels stuck even though pressure appears released.
Lid Lock Mechanism Jammed
Symptom
Multicooker does not power on at all; no lights or display when plugged in.
No Power / Dead Unit
Symptom
Multicooker heats but never reaches pressure; steam constantly escapes from the lid.
Pressure Not Building
Symptom
Multicooker makes loud clicking, popping, or metallic noises during heating.
Thermal Expansion Noise / Loose Internal Components
Symptom
Multicooker powers on but will not start any program; pressing Start does nothing.
Keypad / Start Button Failure
Symptom
Multicooker vibrates excessively or moves on the countertop during operation.
Excessive Vibration / Unstable Base
Symptom
Non-stick coating of the inner pot is peeling or scratched; food sticks badly.
Inner Pot Coating Degradation
Symptom
Steam escapes continuously from the safety valve even at rest, not just during cooking.
Safety Valve Leakage
Symptom
Steam or water leaks from around the lid edges during pressure cooking.
Lid Seal Leakage
Symptom
Steam release valve is very hard to turn or feels stuck.
Steam Release Valve Seized
Symptom
Timer or program finishes too early or runs much longer than expected.
Timing / Control Logic Anomaly
Symptom
Unit trips the household circuit breaker or RCD when plugged in or when heating starts.
Electrical Short / Ground Fault
Symptom
Unpleasant or musty odor from inside the cooker, especially the lid and sealing ring.
Odor Retention in Silicone Ring and Lid
Symptom
Water or starchy liquid spurts out of the steam release valve during cooking.
Excessive Foaming / Vent Blockage
Symptom
Water or steam appears to leak from the bottom of the cooker onto the counter.
Internal Leak / Bottom Housing Leak
Advertisements