KitchenAid Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
F1E0
Electronic oven control displays F1E0 and beeps; oven functions may be disabled or behave erratically.
Main Electronic Oven Control Failure
F1E1
Display shows F1E1, oven will not start or shuts down shortly after starting.
Internal Control Board Hardware Error
F1E2
F1E2 appears on the display; touch panel or keypad does not respond correctly or responds intermittently.
Keypad / Touch Panel Stuck or Shorted
F1E3
F1E3 error displayed; oven may not heat or may shut off unexpectedly.
Oven Temperature Calibration / Configuration Error
F1E4
F1E4 displayed; oven may not respond to user input or may lock/unlock unexpectedly.
Touch Panel to Control Communication Error
F2
Gas cooktop or range oven displays F2; may be accompanied by beeping and shutdown.
Oven Overtemperature Condition
F2E0
F2E0 appears; oven may not start and keypad may be unresponsive.
Keypad Disconnected or Not Detected
F2E1
F2E1 displayed; oven beeps and may not accept input.
Stuck or Shorted Key on Keypad
F2E5
F2E5 error appears; oven may not start or may shut off.
Cancel Key Line Open or Shorted
F30
Induction or radiant cooktop displays F30; one or more burners may not respond.
Touch Control Panel Error
F31
Radiant cooktop shows F31; one or more elements will not heat.
Radiant Element Temperature Limiter or Sensor Error
F3E0
F3E0 displayed; oven will not heat or shuts off; temperature reading may be inaccurate.
Oven Temperature Sensor (RTD) Open or Shorted
F3E1
F3E1 error; oven may overheat or underheat; preheat may not complete.
Upper Oven Temperature Sensor Fault (Double Oven Models)
F3E2
F3E2 error; lower oven will not heat correctly or shuts off.
Lower Oven Temperature Sensor Fault (Double Oven Models)
F3E3
F3E3 displayed; oven temperature reading is erratic or oven shuts down.
Sensor Circuit High Temperature or Short to Voltage
F42
Induction cooktop shows F42 and the affected burner will not heat.
Induction Coil or Pan Detection Error
F47
Induction cooktop zone does not heat and displays F47 on the surface control.
Induction Power Board Failure
F4E0
F4E0 error; oven may not heat or may shut off during use.
Meat Probe Circuit Open or Not Detected
F4E1
F4E1 error; oven may think a probe is inserted when it is not, or may not allow normal baking.
Meat Probe Shorted or Detected When Not Present
F5E0
F5E0 displayed; oven door lock may not operate correctly during self-clean.
Door Latch Not Operating or Not Sensed
F5E1
F5E1 error; oven door remains locked after cycle or will not lock for self-clean.
Door Latch Switch Mismatch
F6E0
F6E0 displayed; oven may not respond or may shut down unexpectedly.
Communication Error Between User Interface and Control
F7E0
F7E0 error; convection fan may not run or oven may not heat evenly.
Convection Fan Speed or Feedback Error
F7E1
F7E1 displayed; oven may not heat or may take excessively long to preheat.
Heating Element or Relay Drive Failure
F8E0
F8E0 error; cooling fan may run constantly or oven may shut down with overheat warning.
Cooling Fan Speed or Overtemperature Error
F8E1
F8E1 displayed; oven may not start self-clean or may shut off with overheat indication.
Oven Overtemperature or Cooling System Failure
F9E0
F9E0 error; oven will not operate and display may be blank or show error after power event.
Line Voltage Error / Miswired or Low Voltage
F9E1
F9E1 displayed; oven door will not lock or unlock during self-clean.
Door Latch Motor Not Operating
F9E2
F9E2 error; oven door remains locked after cycle or will not unlock.
Door Latch Stuck Locked
Symptom
Cooktop glass is cracked or shattered.
Ceramic Glass Top Damage
Symptom
Electric cooktop element only heats on high or does not regulate temperature.
Infinite Switch Failure
Symptom
Electric cooktop radiant element does not heat at all.
Radiant Surface Element Open
Symptom
Electric oven does not heat in Bake; broil may still work.
Bake Element Open Circuit
Symptom
Electric oven does not heat in Broil; bake works normally.
Broil Element Failure
Symptom
Gas cooktop burner does not click or spark at all when turned on.
Ignition Module or Switch Failure
Symptom
Gas cooktop burner flame is yellow, noisy, or lifts off the burner.
Improper Air-Gas Mixture
Symptom
Gas cooktop burner will not ignite; clicking is heard but no flame.
Surface Burner Ignition Failure
Symptom
Gas oven broiler will not ignite; bake works normally.
Broil Igniter or Broil Burner Failure
Symptom
Gas oven will not ignite; no heat in Bake mode, broil may still work.
Bake Igniter Failure
Symptom
Induction cooktop zone clicks but does not heat; display shows normal power level (no code).
Cookware Detection or Low Power Condition
Symptom
Oven door will not close fully; heat escapes and light may stay on.
Door Hinge or Hinge Receiver Failure
Symptom
Oven door will not open after self-clean cycle; no error code displayed.
Door Lock Mechanism Stuck
Symptom
Oven interior light does not work; oven otherwise operates normally.
Oven Light Circuit Failure
Symptom
Oven light and display work but oven will not start any cooking cycle.
Control Lock or Failed Relay Board
Symptom
Oven or cooktop control area becomes excessively hot to the touch during use.
Cooling Airflow Restriction
Symptom
Oven or cooktop control panel buttons are unresponsive; display may still be lit.
User Interface Failure or Control Lock
Symptom
Oven or cooktop emits a gas smell when not in use.
Gas Leak or Incomplete Shutoff
Symptom
Oven or cooktop makes loud popping, banging, or metallic noises during heating or cooling.
Thermal Expansion Noise
Symptom
Oven produces excessive smoke or burning smell during normal baking (not self-clean).
Contamination or Spillage on Heating Surfaces
Symptom
Oven takes a very long time to preheat or never reaches set temperature.
Partial Heating or Temperature Regulation Failure
Symptom
Oven temperature is inaccurate; food undercooked or overcooked compared to set temperature.
Oven Temperature Calibration / Sensor Drift
Symptom
Range or cooktop trips the circuit breaker when a burner or oven is turned on.
Electrical Short Circuit
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| F1E0 |
Electronic oven control displays F1E0 and beeps; oven functions may be disabled or behave erratically.
|
Main Electronic Oven Control Failure | View Details |
| F1E1 |
Display shows F1E1, oven will not start or shuts down shortly after starting.
|
Internal Control Board Hardware Error | View Details |
| F1E2 |
F1E2 appears on the display; touch panel or keypad does not respond correctly or responds intermittently.
|
Keypad / Touch Panel Stuck or Shorted | View Details |
| F1E3 |
F1E3 error displayed; oven may not heat or may shut off unexpectedly.
|
Oven Temperature Calibration / Configuration Error | View Details |
| F1E4 |
F1E4 displayed; oven may not respond to user input or may lock/unlock unexpectedly.
|
Touch Panel to Control Communication Error | View Details |
| F2 |
Gas cooktop or range oven displays F2; may be accompanied by beeping and shutdown.
|
Oven Overtemperature Condition | View Details |
| F2E0 |
F2E0 appears; oven may not start and keypad may be unresponsive.
|
Keypad Disconnected or Not Detected | View Details |
| F2E1 |
F2E1 displayed; oven beeps and may not accept input.
|
Stuck or Shorted Key on Keypad | View Details |
| F2E5 |
F2E5 error appears; oven may not start or may shut off.
|
Cancel Key Line Open or Shorted | View Details |
| F30 |
Induction or radiant cooktop displays F30; one or more burners may not respond.
|
Touch Control Panel Error | View Details |
| F31 |
Radiant cooktop shows F31; one or more elements will not heat.
|
Radiant Element Temperature Limiter or Sensor Error | View Details |
| F3E0 |
F3E0 displayed; oven will not heat or shuts off; temperature reading may be inaccurate.
|
Oven Temperature Sensor (RTD) Open or Shorted | View Details |
| F3E1 |
F3E1 error; oven may overheat or underheat; preheat may not complete.
|
Upper Oven Temperature Sensor Fault (Double Oven Models) | View Details |
| F3E2 |
F3E2 error; lower oven will not heat correctly or shuts off.
|
Lower Oven Temperature Sensor Fault (Double Oven Models) | View Details |
| F3E3 |
F3E3 displayed; oven temperature reading is erratic or oven shuts down.
|
Sensor Circuit High Temperature or Short to Voltage | View Details |
| F42 |
Induction cooktop shows F42 and the affected burner will not heat.
|
Induction Coil or Pan Detection Error | View Details |
| F47 |
Induction cooktop zone does not heat and displays F47 on the surface control.
|
Induction Power Board Failure | View Details |
| F4E0 |
F4E0 error; oven may not heat or may shut off during use.
|
Meat Probe Circuit Open or Not Detected | View Details |
| F4E1 |
F4E1 error; oven may think a probe is inserted when it is not, or may not allow normal baking.
|
Meat Probe Shorted or Detected When Not Present | View Details |
| F5E0 |
F5E0 displayed; oven door lock may not operate correctly during self-clean.
|
Door Latch Not Operating or Not Sensed | View Details |
| F5E1 |
F5E1 error; oven door remains locked after cycle or will not lock for self-clean.
|
Door Latch Switch Mismatch | View Details |
| F6E0 |
F6E0 displayed; oven may not respond or may shut down unexpectedly.
|
Communication Error Between User Interface and Control | View Details |
| F7E0 |
F7E0 error; convection fan may not run or oven may not heat evenly.
|
Convection Fan Speed or Feedback Error | View Details |
| F7E1 |
F7E1 displayed; oven may not heat or may take excessively long to preheat.
|
Heating Element or Relay Drive Failure | View Details |
| F8E0 |
F8E0 error; cooling fan may run constantly or oven may shut down with overheat warning.
|
Cooling Fan Speed or Overtemperature Error | View Details |
| F8E1 |
F8E1 displayed; oven may not start self-clean or may shut off with overheat indication.
|
Oven Overtemperature or Cooling System Failure | View Details |
| F9E0 |
F9E0 error; oven will not operate and display may be blank or show error after power event.
|
Line Voltage Error / Miswired or Low Voltage | View Details |
| F9E1 |
F9E1 displayed; oven door will not lock or unlock during self-clean.
|
Door Latch Motor Not Operating | View Details |
| F9E2 |
F9E2 error; oven door remains locked after cycle or will not unlock.
|
Door Latch Stuck Locked | View Details |
| – |
Cooktop glass is cracked or shattered.
|
Ceramic Glass Top Damage | View Details |
| – |
Electric cooktop element only heats on high or does not regulate temperature.
|
Infinite Switch Failure | View Details |
| – |
Electric cooktop radiant element does not heat at all.
|
Radiant Surface Element Open | View Details |
| – |
Electric oven does not heat in Bake; broil may still work.
|
Bake Element Open Circuit | View Details |
| – |
Electric oven does not heat in Broil; bake works normally.
|
Broil Element Failure | View Details |
| – |
Gas cooktop burner does not click or spark at all when turned on.
|
Ignition Module or Switch Failure | View Details |
| – |
Gas cooktop burner flame is yellow, noisy, or lifts off the burner.
|
Improper Air-Gas Mixture | View Details |
| – |
Gas cooktop burner will not ignite; clicking is heard but no flame.
|
Surface Burner Ignition Failure | View Details |
| – |
Gas oven broiler will not ignite; bake works normally.
|
Broil Igniter or Broil Burner Failure | View Details |
| – |
Gas oven will not ignite; no heat in Bake mode, broil may still work.
|
Bake Igniter Failure | View Details |
| – |
Induction cooktop zone clicks but does not heat; display shows normal power level (no code).
|
Cookware Detection or Low Power Condition | View Details |
| – |
Oven door will not close fully; heat escapes and light may stay on.
|
Door Hinge or Hinge Receiver Failure | View Details |
| – |
Oven door will not open after self-clean cycle; no error code displayed.
|
Door Lock Mechanism Stuck | View Details |
| – |
Oven interior light does not work; oven otherwise operates normally.
|
Oven Light Circuit Failure | View Details |
| – |
Oven light and display work but oven will not start any cooking cycle.
|
Control Lock or Failed Relay Board | View Details |
| – |
Oven or cooktop control area becomes excessively hot to the touch during use.
|
Cooling Airflow Restriction | View Details |
| – |
Oven or cooktop control panel buttons are unresponsive; display may still be lit.
|
User Interface Failure or Control Lock | View Details |
| – |
Oven or cooktop emits a gas smell when not in use.
|
Gas Leak or Incomplete Shutoff | View Details |
| – |
Oven or cooktop makes loud popping, banging, or metallic noises during heating or cooling.
|
Thermal Expansion Noise | View Details |
| – |
Oven produces excessive smoke or burning smell during normal baking (not self-clean).
|
Contamination or Spillage on Heating Surfaces | View Details |
| – |
Oven takes a very long time to preheat or never reaches set temperature.
|
Partial Heating or Temperature Regulation Failure | View Details |
| – |
Oven temperature is inaccurate; food undercooked or overcooked compared to set temperature.
|
Oven Temperature Calibration / Sensor Drift | View Details |
| – |
Range or cooktop trips the circuit breaker when a burner or oven is turned on.
|
Electrical Short Circuit | View Details |
No matching codes found
Advertisements