Midea Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
Induction cooktop will not power on, display shows E0 or remains at E0 when any key is pressed.
User Interface Lock / No Pan Detected
E1
Induction cooktop zone shuts down and displays E1 shortly after turning on.
Cookware Detection / Low Load Fault
E2
Induction cooktop zone stops heating and displays E2 after operating for a short time.
Cooktop Overheat Protection Activated
E3
Induction cooktop displays E3 and will not heat on one or more zones.
Input Voltage Too High
E4
Induction cooktop shows E4 and affected zone does not heat.
Input Voltage Too Low / Under-voltage Protection
E5
Induction cooktop displays E5 and shuts down the affected zone.
IGBT Overheat / Power Module Overtemperature
E6
Induction cooktop shows E6 and the affected zone will not operate.
Temperature Sensor Fault (NTC Open/Short)
E7
Induction cooktop displays E7 and one or more zones are disabled.
Internal Communication Error Between Touch Control and Power Board
E8
Induction cooktop shows E8 and will not heat on the affected zone.
Induction Coil / Power Module Fault
E9
Induction cooktop displays E9 and beeps, no heating on one or more zones.
Fan Speed / Cooling System Error
ER
Gas or electric range displays ER on the clock or control panel and beeps; controls may be locked.
General Control Error / Keypad Lock
F1
Electric range oven displays F1 and may beep continuously; oven may shut off.
Oven Temperature Sensor Circuit Fault
F2
Electric range oven shows F2 during or after a bake or self-clean cycle; oven may overheat.
Oven Overtemperature / Runaway Temperature
F3
Electric range oven displays F3 and will not start or maintain temperature.
Oven Temperature Sensor Open Circuit
F4
Electric range oven shows F4 and may not heat correctly.
Oven Temperature Sensor Short Circuit
F5
Electric range oven displays F5 and beeps; keypad may not respond correctly.
Keypad / Touch Panel Fault
F7
Electric range oven shows F7 and may not start; sometimes appears intermittently.
Function Key Stuck or Shorted
F8
Electric range oven displays F8 and may not heat or may shut off unexpectedly.
Relay Board / Power Relay Fault
F9
Electric range oven shows F9 and the door may remain locked or unlocked incorrectly.
Oven Door Lock / Latch Fault
LOC
Range or cooktop display shows LOC or a lock icon; none of the controls respond.
Control Lock / Child Lock Activated
PF
Range display shows PF and clock is flashing after a power interruption.
Power Failure Indication
Symptom
Cooktop controls are unresponsive; touch buttons do not react, but display may be lit.
Unresponsive Touch Control Panel
Symptom
Cooktop glass is cracked or shattered.
Ceramic Glass Surface Damage
Symptom
Cooktop or range trips the circuit breaker when a burner or oven is turned on.
Electrical Short or Overcurrent
Symptom
Cooktop surface around burners becomes discolored or stained.
Cosmetic Surface Damage / Heat Staining
Symptom
Electric cooktop element cycles on and off more frequently than expected at high settings.
Normal Cycling / Temperature Limiter Operation
Symptom
Electric cooktop radiant element will not heat, indicator light may still come on.
Open Surface Element or Infinite Switch Failure
Symptom
Gas burner ignites but flame is weak, yellow, or uneven.
Improper Gas-Air Mixture / Burner Contamination
Symptom
Gas burner keeps clicking even after the flame is lit.
Continuous Ignition / Flame Sensing Issue
Symptom
Gas burner will not ignite; clicking sound may be present but no flame.
Gas Burner Ignition Failure
Symptom
Induction cooktop makes loud buzzing or humming noises during operation.
Induction Coil Vibration / Normal Acoustic Noise
Symptom
Oven door will not close fully; heat escapes around the door.
Door Hinge or Gasket Misalignment
Symptom
Oven door will not unlock after self-clean cycle completes.
Stuck Door Lock Mechanism
Symptom
Oven light does not turn on when door is opened or when light button is pressed.
Oven Cavity Light Failure
Symptom
Oven temperature is inaccurate; food undercooked or overcooked compared to set temperature.
Oven Temperature Calibration / Sensor Drift
Symptom
Oven will not heat in bake mode; broil may still work.
Bake Element Circuit Failure
Symptom
Oven will not heat in broil mode; bake may still work.
Broil Element Circuit Failure
Symptom
Range clock and display are blank; oven and cooktop do not operate.
No Power to Control Board
Symptom
Range or cooktop emits a strong burning or electrical smell during use.
Overheating Component or Residual Manufacturing Oils
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
Induction cooktop will not power on, display shows E0 or remains at E0 when any key is pressed.
|
User Interface Lock / No Pan Detected | View Details |
| E1 |
Induction cooktop zone shuts down and displays E1 shortly after turning on.
|
Cookware Detection / Low Load Fault | View Details |
| E2 |
Induction cooktop zone stops heating and displays E2 after operating for a short time.
|
Cooktop Overheat Protection Activated | View Details |
| E3 |
Induction cooktop displays E3 and will not heat on one or more zones.
|
Input Voltage Too High | View Details |
| E4 |
Induction cooktop shows E4 and affected zone does not heat.
|
Input Voltage Too Low / Under-voltage Protection | View Details |
| E5 |
Induction cooktop displays E5 and shuts down the affected zone.
|
IGBT Overheat / Power Module Overtemperature | View Details |
| E6 |
Induction cooktop shows E6 and the affected zone will not operate.
|
Temperature Sensor Fault (NTC Open/Short) | View Details |
| E7 |
Induction cooktop displays E7 and one or more zones are disabled.
|
Internal Communication Error Between Touch Control and Power Board | View Details |
| E8 |
Induction cooktop shows E8 and will not heat on the affected zone.
|
Induction Coil / Power Module Fault | View Details |
| E9 |
Induction cooktop displays E9 and beeps, no heating on one or more zones.
|
Fan Speed / Cooling System Error | View Details |
| ER |
Gas or electric range displays ER on the clock or control panel and beeps; controls may be locked.
|
General Control Error / Keypad Lock | View Details |
| F1 |
Electric range oven displays F1 and may beep continuously; oven may shut off.
|
Oven Temperature Sensor Circuit Fault | View Details |
| F2 |
Electric range oven shows F2 during or after a bake or self-clean cycle; oven may overheat.
|
Oven Overtemperature / Runaway Temperature | View Details |
| F3 |
Electric range oven displays F3 and will not start or maintain temperature.
|
Oven Temperature Sensor Open Circuit | View Details |
| F4 |
Electric range oven shows F4 and may not heat correctly.
|
Oven Temperature Sensor Short Circuit | View Details |
| F5 |
Electric range oven displays F5 and beeps; keypad may not respond correctly.
|
Keypad / Touch Panel Fault | View Details |
| F7 |
Electric range oven shows F7 and may not start; sometimes appears intermittently.
|
Function Key Stuck or Shorted | View Details |
| F8 |
Electric range oven displays F8 and may not heat or may shut off unexpectedly.
|
Relay Board / Power Relay Fault | View Details |
| F9 |
Electric range oven shows F9 and the door may remain locked or unlocked incorrectly.
|
Oven Door Lock / Latch Fault | View Details |
| LOC |
Range or cooktop display shows LOC or a lock icon; none of the controls respond.
|
Control Lock / Child Lock Activated | View Details |
| PF |
Range display shows PF and clock is flashing after a power interruption.
|
Power Failure Indication | View Details |
| – |
Cooktop controls are unresponsive; touch buttons do not react, but display may be lit.
|
Unresponsive Touch Control Panel | View Details |
| – |
Cooktop glass is cracked or shattered.
|
Ceramic Glass Surface Damage | View Details |
| – |
Cooktop or range trips the circuit breaker when a burner or oven is turned on.
|
Electrical Short or Overcurrent | View Details |
| – |
Cooktop surface around burners becomes discolored or stained.
|
Cosmetic Surface Damage / Heat Staining | View Details |
| – |
Electric cooktop element cycles on and off more frequently than expected at high settings.
|
Normal Cycling / Temperature Limiter Operation | View Details |
| – |
Electric cooktop radiant element will not heat, indicator light may still come on.
|
Open Surface Element or Infinite Switch Failure | View Details |
| – |
Gas burner ignites but flame is weak, yellow, or uneven.
|
Improper Gas-Air Mixture / Burner Contamination | View Details |
| – |
Gas burner keeps clicking even after the flame is lit.
|
Continuous Ignition / Flame Sensing Issue | View Details |
| – |
Gas burner will not ignite; clicking sound may be present but no flame.
|
Gas Burner Ignition Failure | View Details |
| – |
Induction cooktop makes loud buzzing or humming noises during operation.
|
Induction Coil Vibration / Normal Acoustic Noise | View Details |
| – |
Oven door will not close fully; heat escapes around the door.
|
Door Hinge or Gasket Misalignment | View Details |
| – |
Oven door will not unlock after self-clean cycle completes.
|
Stuck Door Lock Mechanism | View Details |
| – |
Oven light does not turn on when door is opened or when light button is pressed.
|
Oven Cavity Light Failure | View Details |
| – |
Oven temperature is inaccurate; food undercooked or overcooked compared to set temperature.
|
Oven Temperature Calibration / Sensor Drift | View Details |
| – |
Oven will not heat in bake mode; broil may still work.
|
Bake Element Circuit Failure | View Details |
| – |
Oven will not heat in broil mode; bake may still work.
|
Broil Element Circuit Failure | View Details |
| – |
Range clock and display are blank; oven and cooktop do not operate.
|
No Power to Control Board | View Details |
| – |
Range or cooktop emits a strong burning or electrical smell during use.
|
Overheating Component or Residual Manufacturing Oils | View Details |
No matching codes found
Advertisements