Stoves
Stoves Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
Cooktop or range display shows E0 and may not respond to touch controls.
Touch Control Communication or Initialization Error
E1
Induction or radiant cooktop section displays E1 and will not heat.
Cooktop Overheat or Pan Detection Error
E2
Cooktop displays E2 and disables one or more heating zones.
Cooktop Surface Temperature Sensor Fault
E3
Induction cooktop zone shows E3 and will not heat.
Induction Power Module Overcurrent or Overvoltage
E4
Cooktop displays E4, often on a single burner zone.
Cooktop Temperature Sensor Calibration or Fault
E5
Cooktop shows E5 and may shut down all zones.
Cooktop Overheat Protection Triggered
F1
Electronic oven control beeps and displays F1, oven may not respond to keypad inputs or may shut off unexpectedly.
Electronic Oven Control (EOC) Keypad or Control Board Failure
F10
F10 displayed, oven may continue heating uncontrollably or overshoot set temperature.
Runaway Oven Temperature
F11
F11 displayed with continuous beeping; oven may still operate but alarm persists.
Keypad Short or Stuck Key
F13
F13 displayed, often related to the oven door lock or self-clean function.
Door Lock Switch or Circuit Error
F2
Oven displays F2 and may shut off during a bake or broil cycle; oven may feel excessively hot.
Oven Over-Temperature Condition or Stuck Relay
F3
Range displays F3 and disables oven heating; oven will not start a bake or broil cycle.
Oven Temperature Sensor Circuit Open
F30
F30 displayed and oven will not heat or gives inaccurate temperatures.
Oven Temperature Sensor Open Circuit
F31
F31 displayed, oven may not start or may shut down quickly.
Oven Temperature Sensor Short Circuit
F4
Display shows F4 and oven will not heat or may shut down mid-cycle.
Oven Temperature Sensor Circuit Shorted
F5
Control panel beeps and shows F5; oven functions may be locked out.
Control Board Relay or Watchdog Failure
F7
Display shows F7, often accompanied by continuous beeping; keypad may be unresponsive or register phantom key presses.
Stuck or Shorted Keypad
F8
F8 displayed, oven may not reach set temperature or may shut off prematurely.
Oven Over-Temperature or Cooling Fan Failure
F9
F9 displayed and oven door may remain locked or will not lock/unlock after a self-clean cycle.
Oven Door Lock Circuit Failure
F90
F90 displayed, oven door may be stuck locked or will not lock for self-clean.
Door Lock Motor or Switch Failure
F91
F91 displayed when attempting self-clean; door does not lock.
Door Lock Cannot Reach Locked Position
F92
F92 displayed after self-clean; door remains locked and will not open.
Door Lock Cannot Reach Unlocked Position
F93
F93 displayed, often during or after self-clean; door lock operation is erratic.
Door Lock Travel Time-Out
F95
F95 displayed, self-clean and some oven functions disabled.
Door Lock Motor Circuit Error
Symptom
Cooktop glass is cracked or shattered.
Damaged Ceramic Glass Cooktop
Symptom
Cooktop knobs are hard to turn or feel stuck.
Seized Valve Stem or Contaminated Knob Shaft
Symptom
Electric surface element does not heat at all.
Open Surface Element or Infinite Switch Failure
Symptom
Excessive condensation or steam escaping from oven door during cooking.
Door Seal or Venting Issue
Symptom
Gas oven will not ignite; you hear clicking but no flame, or no clicking at all.
Gas Oven Ignition Failure
Symptom
Gas surface burner will not stop clicking after flame is lit.
Continuous Ignition Spark
Symptom
Oven door will not close fully or hangs unevenly.
Misaligned or Damaged Oven Door Hinges
Symptom
Oven door will not stay closed tightly; heat escapes and cooking is uneven.
Worn Door Gasket or Weak Hinges
Symptom
Oven fan runs continuously, even when the oven is off and cool.
Stuck Cooling Fan Relay or Faulty Temperature Sensor
Symptom
Oven light and display work, but oven will not start any bake or broil function.
Oven Power Relay or Line Supply Failure
Symptom
Oven light does not work, but oven heats normally.
Oven Cavity Light Failure
Symptom
Oven makes loud banging, rattling, or grinding noises during operation.
Fan or Panel Vibration Noise
Symptom
Oven or cooktop controls are unresponsive; display may be on but buttons do not work.
Control Lock Enabled or Failed User Interface
Symptom
Oven or cooktop emits a strong burning or electrical smell during use.
Overheating Component or Contaminant Burn-Off
Symptom
Oven temperature is consistently too hot or too cold compared to the set temperature.
Oven Temperature Calibration Error
Symptom
Oven will not heat in bake mode, but broil may still work.
Open Bake Element Circuit
Symptom
Oven will not heat in broil mode, but bake works normally.
Open Broil Element Circuit
Symptom
Range or cooktop trips the circuit breaker when a burner or oven is turned on.
Electrical Short to Ground
Symptom
Surface burner on gas cooktop will not ignite; you hear clicking but no flame.
Gas Surface Burner Ignition Failure
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
Cooktop or range display shows E0 and may not respond to touch controls.
|
Touch Control Communication or Initialization Error | View Details |
| E1 |
Induction or radiant cooktop section displays E1 and will not heat.
|
Cooktop Overheat or Pan Detection Error | View Details |
| E2 |
Cooktop displays E2 and disables one or more heating zones.
|
Cooktop Surface Temperature Sensor Fault | View Details |
| E3 |
Induction cooktop zone shows E3 and will not heat.
|
Induction Power Module Overcurrent or Overvoltage | View Details |
| E4 |
Cooktop displays E4, often on a single burner zone.
|
Cooktop Temperature Sensor Calibration or Fault | View Details |
| E5 |
Cooktop shows E5 and may shut down all zones.
|
Cooktop Overheat Protection Triggered | View Details |
| F1 |
Electronic oven control beeps and displays F1, oven may not respond to keypad inputs or may shut off unexpectedly.
|
Electronic Oven Control (EOC) Keypad or Control Board Failure | View Details |
| F10 |
F10 displayed, oven may continue heating uncontrollably or overshoot set temperature.
|
Runaway Oven Temperature | View Details |
| F11 |
F11 displayed with continuous beeping; oven may still operate but alarm persists.
|
Keypad Short or Stuck Key | View Details |
| F13 |
F13 displayed, often related to the oven door lock or self-clean function.
|
Door Lock Switch or Circuit Error | View Details |
| F2 |
Oven displays F2 and may shut off during a bake or broil cycle; oven may feel excessively hot.
|
Oven Over-Temperature Condition or Stuck Relay | View Details |
| F3 |
Range displays F3 and disables oven heating; oven will not start a bake or broil cycle.
|
Oven Temperature Sensor Circuit Open | View Details |
| F30 |
F30 displayed and oven will not heat or gives inaccurate temperatures.
|
Oven Temperature Sensor Open Circuit | View Details |
| F31 |
F31 displayed, oven may not start or may shut down quickly.
|
Oven Temperature Sensor Short Circuit | View Details |
| F4 |
Display shows F4 and oven will not heat or may shut down mid-cycle.
|
Oven Temperature Sensor Circuit Shorted | View Details |
| F5 |
Control panel beeps and shows F5; oven functions may be locked out.
|
Control Board Relay or Watchdog Failure | View Details |
| F7 |
Display shows F7, often accompanied by continuous beeping; keypad may be unresponsive or register phantom key presses.
|
Stuck or Shorted Keypad | View Details |
| F8 |
F8 displayed, oven may not reach set temperature or may shut off prematurely.
|
Oven Over-Temperature or Cooling Fan Failure | View Details |
| F9 |
F9 displayed and oven door may remain locked or will not lock/unlock after a self-clean cycle.
|
Oven Door Lock Circuit Failure | View Details |
| F90 |
F90 displayed, oven door may be stuck locked or will not lock for self-clean.
|
Door Lock Motor or Switch Failure | View Details |
| F91 |
F91 displayed when attempting self-clean; door does not lock.
|
Door Lock Cannot Reach Locked Position | View Details |
| F92 |
F92 displayed after self-clean; door remains locked and will not open.
|
Door Lock Cannot Reach Unlocked Position | View Details |
| F93 |
F93 displayed, often during or after self-clean; door lock operation is erratic.
|
Door Lock Travel Time-Out | View Details |
| F95 |
F95 displayed, self-clean and some oven functions disabled.
|
Door Lock Motor Circuit Error | View Details |
| – |
Cooktop glass is cracked or shattered.
|
Damaged Ceramic Glass Cooktop | View Details |
| – |
Cooktop knobs are hard to turn or feel stuck.
|
Seized Valve Stem or Contaminated Knob Shaft | View Details |
| – |
Electric surface element does not heat at all.
|
Open Surface Element or Infinite Switch Failure | View Details |
| – |
Excessive condensation or steam escaping from oven door during cooking.
|
Door Seal or Venting Issue | View Details |
| – |
Gas oven will not ignite; you hear clicking but no flame, or no clicking at all.
|
Gas Oven Ignition Failure | View Details |
| – |
Gas surface burner will not stop clicking after flame is lit.
|
Continuous Ignition Spark | View Details |
| – |
Oven door will not close fully or hangs unevenly.
|
Misaligned or Damaged Oven Door Hinges | View Details |
| – |
Oven door will not stay closed tightly; heat escapes and cooking is uneven.
|
Worn Door Gasket or Weak Hinges | View Details |
| – |
Oven fan runs continuously, even when the oven is off and cool.
|
Stuck Cooling Fan Relay or Faulty Temperature Sensor | View Details |
| – |
Oven light and display work, but oven will not start any bake or broil function.
|
Oven Power Relay or Line Supply Failure | View Details |
| – |
Oven light does not work, but oven heats normally.
|
Oven Cavity Light Failure | View Details |
| – |
Oven makes loud banging, rattling, or grinding noises during operation.
|
Fan or Panel Vibration Noise | View Details |
| – |
Oven or cooktop controls are unresponsive; display may be on but buttons do not work.
|
Control Lock Enabled or Failed User Interface | View Details |
| – |
Oven or cooktop emits a strong burning or electrical smell during use.
|
Overheating Component or Contaminant Burn-Off | View Details |
| – |
Oven temperature is consistently too hot or too cold compared to the set temperature.
|
Oven Temperature Calibration Error | View Details |
| – |
Oven will not heat in bake mode, but broil may still work.
|
Open Bake Element Circuit | View Details |
| – |
Oven will not heat in broil mode, but bake works normally.
|
Open Broil Element Circuit | View Details |
| – |
Range or cooktop trips the circuit breaker when a burner or oven is turned on.
|
Electrical Short to Ground | View Details |
| – |
Surface burner on gas cooktop will not ignite; you hear clicking but no flame.
|
Gas Surface Burner Ignition Failure | View Details |
No matching codes found
Advertisements