Crosley Dishwashers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Dishwasher will not fill with water; cycle starts then quickly pauses and displays E1.
Water Inlet Timeout / Fill Fault
E10
Dishwasher displays E10; control panel is responsive but cycle will not start or advance.
Control Board Communication / Program Fault
E11
Dishwasher displays E11; spray arms may not rotate and wash performance is poor.
Spray Arm / Diverter Motor Fault
E12
Dishwasher displays E12; fan noise may be absent and dishes remain wet at end of cycle.
Drying Fan / Vent Fault
E13
Dishwasher displays E13; unit may shut down shortly after starting and interior feels excessively hot.
Overheating / High Temperature Fault
E14
Dishwasher displays E14; water may be present but circulation is weak and wash quality is poor.
Sump Pressure / Flow Sensor Fault
E15
Dishwasher displays E15; unit may not respond to controls or may shut off unexpectedly.
User Interface / Touch Panel Fault
E16
Dishwasher displays E16; unit may start then immediately stop with a beeping sound.
Power Supply / Voltage Fault
E17
Dishwasher displays E17; detergent door may not open or opens at the wrong time.
Detergent Dispenser / Wax Motor Fault
E18
Dishwasher displays E18; unit may run but water level is inconsistent and sometimes too high or too low.
Water Level Sensing / Pressure Switch Fault
E19
Dishwasher displays E19; unit may not respond to certain cycle selections or options.
Cycle Selection / Program Key Fault
E2
Dishwasher fills but does not heat water; cycle completes with cold dishes and E2 displayed.
Heating Circuit Failure
E20
Dishwasher displays E20; unit may hum but not start washing, or may stop shortly after starting.
Motor Start / Overcurrent Fault
E3
Dishwasher stops mid-cycle and displays E3; water remains in tub and cycle will not advance.
Drain Timeout / Drain Pump Fault
E4
Dishwasher overfills with water, may leak from door, and displays E4.
Overfill / Overflow Protection Activated
E5
Dishwasher stops shortly after starting and displays E5; no water is sprayed and circulation pump is silent.
Wash / Circulation Pump Failure
E6
Dishwasher displays E6 and stops; water may be lukewarm or excessively hot; cycles end prematurely.
Temperature Sensor / NTC Fault
E7
Dishwasher displays E7 and will not start; door appears closed but machine thinks it is open.
Door Latch / Door Switch Fault
E8
Dishwasher displays E8; water level appears low and spray arms may not rotate properly.
Low Water Level / Fill Volume Error
E9
Dishwasher displays E9 and stops; often associated with water detected in the base pan or under the unit.
Leak Detected / Base Pan Flood Sensor Activated
Symptom
Dishes are not getting clean; food remains on plates and glasses after a full cycle.
Poor Wash Performance
Symptom
Dishes remain wet at the end of the cycle; poor drying performance.
Poor Drying / Vent or Heater Issue
Symptom
Dishwasher does not drain; water remains in the bottom of the tub at the end of the cycle.
Poor or No Drainage
Symptom
Dishwasher door falls open quickly or will not stay in the partially open position.
Door Hinge / Spring Cable Failure
Symptom
Dishwasher door is hard to close or does not latch properly.
Door Alignment / Latch Interference
Symptom
Dishwasher emits a burning smell during operation.
Overheating Component / Electrical Burning
Symptom
Dishwasher fills with water but does not wash; spray arms do not move and dishes remain dirty.
Circulation Pump Not Running
Symptom
Dishwasher has a bad odor, musty or rotten smell inside the tub.
Odor / Bacterial Growth
Symptom
Dishwasher has power but will not start cycle; lights may be on but pressing Start does nothing.
Start Circuit / Door Interlock Issue
Symptom
Dishwasher leaks from underneath the unit onto the floor.
Underbody Leak / Hose or Pump Leak
Symptom
Dishwasher leaks water from the bottom of the door during the wash cycle.
Door Seal / Overfill Leak
Symptom
Dishwasher leaves detergent (powder or pod) partially undissolved in the dispenser or on the bottom of the tub.
Detergent Dispensing / Water Coverage Issue
Symptom
Dishwasher makes a high-pitched squealing or whining noise during operation.
Pump Bearing Wear / Motor Noise
Symptom
Dishwasher makes loud grinding or rattling noises during wash or drain.
Foreign Object in Pump or Spray System
Symptom
Dishwasher runs for an unusually long time or never seems to finish the cycle.
Extended Cycle / Heating or Sensor Issue
Symptom
Dishwasher stops mid-cycle and must be restarted to continue.
Intermittent Power or Overheat Shutdown
Symptom
Dishwasher vibrates excessively or moves during operation.
Excessive Vibration / Installation Issue
Symptom
Dishwasher will not power on at all; no lights on control panel and no response to any buttons.
No Power / Dead Appliance
Symptom
Rust spots appearing on the interior racks or tub, and rust transferring to dishes.
Rack Coating Failure / Corrosion
Symptom
Water backs up into the dishwasher from the sink or garbage disposal.
Drain Backflow / Improper Hose Installation
Symptom
White film or cloudy residue on dishes and glassware after washing.
Hard Water Deposits / Rinse Aid Issue
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Dishwasher will not fill with water; cycle starts then quickly pauses and displays E1.
|
Water Inlet Timeout / Fill Fault | View Details |
| E10 |
Dishwasher displays E10; control panel is responsive but cycle will not start or advance.
|
Control Board Communication / Program Fault | View Details |
| E11 |
Dishwasher displays E11; spray arms may not rotate and wash performance is poor.
|
Spray Arm / Diverter Motor Fault | View Details |
| E12 |
Dishwasher displays E12; fan noise may be absent and dishes remain wet at end of cycle.
|
Drying Fan / Vent Fault | View Details |
| E13 |
Dishwasher displays E13; unit may shut down shortly after starting and interior feels excessively hot.
|
Overheating / High Temperature Fault | View Details |
| E14 |
Dishwasher displays E14; water may be present but circulation is weak and wash quality is poor.
|
Sump Pressure / Flow Sensor Fault | View Details |
| E15 |
Dishwasher displays E15; unit may not respond to controls or may shut off unexpectedly.
|
User Interface / Touch Panel Fault | View Details |
| E16 |
Dishwasher displays E16; unit may start then immediately stop with a beeping sound.
|
Power Supply / Voltage Fault | View Details |
| E17 |
Dishwasher displays E17; detergent door may not open or opens at the wrong time.
|
Detergent Dispenser / Wax Motor Fault | View Details |
| E18 |
Dishwasher displays E18; unit may run but water level is inconsistent and sometimes too high or too low.
|
Water Level Sensing / Pressure Switch Fault | View Details |
| E19 |
Dishwasher displays E19; unit may not respond to certain cycle selections or options.
|
Cycle Selection / Program Key Fault | View Details |
| E2 |
Dishwasher fills but does not heat water; cycle completes with cold dishes and E2 displayed.
|
Heating Circuit Failure | View Details |
| E20 |
Dishwasher displays E20; unit may hum but not start washing, or may stop shortly after starting.
|
Motor Start / Overcurrent Fault | View Details |
| E3 |
Dishwasher stops mid-cycle and displays E3; water remains in tub and cycle will not advance.
|
Drain Timeout / Drain Pump Fault | View Details |
| E4 |
Dishwasher overfills with water, may leak from door, and displays E4.
|
Overfill / Overflow Protection Activated | View Details |
| E5 |
Dishwasher stops shortly after starting and displays E5; no water is sprayed and circulation pump is silent.
|
Wash / Circulation Pump Failure | View Details |
| E6 |
Dishwasher displays E6 and stops; water may be lukewarm or excessively hot; cycles end prematurely.
|
Temperature Sensor / NTC Fault | View Details |
| E7 |
Dishwasher displays E7 and will not start; door appears closed but machine thinks it is open.
|
Door Latch / Door Switch Fault | View Details |
| E8 |
Dishwasher displays E8; water level appears low and spray arms may not rotate properly.
|
Low Water Level / Fill Volume Error | View Details |
| E9 |
Dishwasher displays E9 and stops; often associated with water detected in the base pan or under the unit.
|
Leak Detected / Base Pan Flood Sensor Activated | View Details |
| – |
Dishes are not getting clean; food remains on plates and glasses after a full cycle.
|
Poor Wash Performance | View Details |
| – |
Dishes remain wet at the end of the cycle; poor drying performance.
|
Poor Drying / Vent or Heater Issue | View Details |
| – |
Dishwasher does not drain; water remains in the bottom of the tub at the end of the cycle.
|
Poor or No Drainage | View Details |
| – |
Dishwasher door falls open quickly or will not stay in the partially open position.
|
Door Hinge / Spring Cable Failure | View Details |
| – |
Dishwasher door is hard to close or does not latch properly.
|
Door Alignment / Latch Interference | View Details |
| – |
Dishwasher emits a burning smell during operation.
|
Overheating Component / Electrical Burning | View Details |
| – |
Dishwasher fills with water but does not wash; spray arms do not move and dishes remain dirty.
|
Circulation Pump Not Running | View Details |
| – |
Dishwasher has a bad odor, musty or rotten smell inside the tub.
|
Odor / Bacterial Growth | View Details |
| – |
Dishwasher has power but will not start cycle; lights may be on but pressing Start does nothing.
|
Start Circuit / Door Interlock Issue | View Details |
| – |
Dishwasher leaks from underneath the unit onto the floor.
|
Underbody Leak / Hose or Pump Leak | View Details |
| – |
Dishwasher leaks water from the bottom of the door during the wash cycle.
|
Door Seal / Overfill Leak | View Details |
| – |
Dishwasher leaves detergent (powder or pod) partially undissolved in the dispenser or on the bottom of the tub.
|
Detergent Dispensing / Water Coverage Issue | View Details |
| – |
Dishwasher makes a high-pitched squealing or whining noise during operation.
|
Pump Bearing Wear / Motor Noise | View Details |
| – |
Dishwasher makes loud grinding or rattling noises during wash or drain.
|
Foreign Object in Pump or Spray System | View Details |
| – |
Dishwasher runs for an unusually long time or never seems to finish the cycle.
|
Extended Cycle / Heating or Sensor Issue | View Details |
| – |
Dishwasher stops mid-cycle and must be restarted to continue.
|
Intermittent Power or Overheat Shutdown | View Details |
| – |
Dishwasher vibrates excessively or moves during operation.
|
Excessive Vibration / Installation Issue | View Details |
| – |
Dishwasher will not power on at all; no lights on control panel and no response to any buttons.
|
No Power / Dead Appliance | View Details |
| – |
Rust spots appearing on the interior racks or tub, and rust transferring to dishes.
|
Rack Coating Failure / Corrosion | View Details |
| – |
Water backs up into the dishwasher from the sink or garbage disposal.
|
Drain Backflow / Improper Hose Installation | View Details |
| – |
White film or cloudy residue on dishes and glassware after washing.
|
Hard Water Deposits / Rinse Aid Issue | View Details |
No matching codes found
Advertisements