Tiger
Tiger Multicookers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Multicooker does not start cooking; display shows E01 shortly after pressing Start.
Lid Lock / Lid Switch Detection Error
E02
Multicooker shows E02 and will not start heating or cancels cooking shortly after starting.
Inner Pot / Pan Detection Error
E03
Display shows E03 during preheat or early in the cooking cycle; cooker stops heating.
Bottom Temperature Sensor (NTC) Open / Disconnected
E04
Display shows E04 and cooking is aborted; often occurs after extended heating or high-temperature programs.
Bottom Temperature Sensor (NTC) Short / Overtemperature Detection
E05
Multicooker displays E05 and will not start pressure or high-heat programs.
Lid Temperature Sensor / Steam Cap Sensor Error
E06
Display shows E06; cooker may not heat or may shut off unexpectedly.
Heater Plate Overheat / Thermal Fuse Protection
E07
E07 appears when trying to start a pressure-cooking program; unit will not build pressure.
Pressure Sensor / Pressure Switch Error
E08
E08 error during pressure cooking; cooker may stop mid-cycle and release steam.
Abnormal Pressure Rise / Overpressure Detection
E09
E09 appears and cooker stops; often associated with power fluctuations or after plugging into a different outlet.
Input Power / Voltage Abnormality Detection
E10
E10 error appears; cooker may not respond to button presses or may freeze mid-operation.
Control Board Communication / CPU Error
H01
H01 code appears; cooker keeps food warm but will not enter cook mode.
Keep-Warm Circuit Only / Main Heater Disabled
H02
H02 code; cooker remains in warm mode and cannot be switched to certain programs.
Program Selection / Mode Lock Error
U01
Display shows U01 and cooker will not start; often accompanied by a beeping sound.
Lid Not Closed / Lock Not Engaged Warning
U02
U02 warning appears; cooker beeps and may not enter pressure mode.
Steam Cap / Vent Cap Not Installed or Misaligned
U03
U03 appears and cooker will not start; often when the inner pot is missing.
Inner Pot Missing / Incorrect Pot Warning
U04
U04 warning; cooker beeps and cancels pressure program before heating.
Lid Gasket / Packing Not Installed or Improperly Seated
Symptom
Buttons are unresponsive or require very hard pressing to register.
Keypad / Membrane Switch Wear
Symptom
Condensation collector frequently overflows, dripping water down the side of the cooker.
Condensation Management / Drainage Issue
Symptom
Display is dim, flickering, or segments are missing, but cooker still heats.
Display Module / LED-LCD Failure
Symptom
Excessive steam escapes continuously from the steam vent during pressure cooking; cooker struggles to reach or maintain pressure.
Pressure Loss / Vent Valve Not Sealing
Symptom
Grinding or scraping noise when opening or closing the lid.
Lid Hinge / Spring Mechanism Wear
Symptom
Inner pot nonstick coating is peeling, scratched, or flaking.
Inner Pot Coating Degradation
Symptom
Keep Warm mode is too cool; food becomes lukewarm or unsafe after a short time.
Keep-Warm Temperature Too Low
Symptom
Keep Warm mode overheats food, causing drying or burning over time.
Keep-Warm Temperature Too High
Symptom
Lid does not lock properly; can be opened easily during cooking.
Lid Lock Failure / Incomplete Engagement
Symptom
Lid will not open after cooking; feels stuck even after the cooker has cooled.
Lid Lock Jam / Float Valve Stuck
Symptom
Multicooker does not power on at all; no lights or display when plugged in.
No Power / Dead Unit
Symptom
Multicooker heats but never reaches a boil; rice remains undercooked or hard even after full cycle.
Insufficient Heating / Weak Heater Output
Symptom
Multicooker makes loud clicking, popping, or metallic noises during heating.
Thermal Expansion Noise / Pot and Heater Interaction
Symptom
Multicooker overheats; rice scorches or burns on the bottom while top remains undercooked.
Localized Overheating / Temperature Control Drift
Symptom
Multicooker powers on but will not start any cooking program; pressing Start does nothing or beeps only.
Start Inhibit / Safety Interlock Not Satisfied
Symptom
Multicooker shuts off unexpectedly in the middle of a cooking cycle and returns to standby or no display.
Intermittent Power Loss / Thermal Cutout
Symptom
Multicooker takes much longer than usual to cook the same recipe.
Extended Cooking Time / Slow Heating
Symptom
Persistent sour or rancid smell from inside the cooker even after normal cleaning.
Odor Contamination / Residual Oil and Food Deposits
Symptom
Rice comes out mushy or too soft even when using correct water level and program.
Overcooking / Temperature or Timing Miscalibration
Symptom
Unusual burning smell or electrical odor during operation.
Overheating Component / Electrical Insulation Breakdown
Symptom
Water or starchy liquid leaks from around the lid during cooking.
Lid Seal Leakage / Gasket Failure
Symptom
Water or steam leaks from the bottom of the multicooker onto the countertop.
Internal Leak / Condensation Misrouting
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Multicooker does not start cooking; display shows E01 shortly after pressing Start.
|
Lid Lock / Lid Switch Detection Error | View Details |
| E02 |
Multicooker shows E02 and will not start heating or cancels cooking shortly after starting.
|
Inner Pot / Pan Detection Error | View Details |
| E03 |
Display shows E03 during preheat or early in the cooking cycle; cooker stops heating.
|
Bottom Temperature Sensor (NTC) Open / Disconnected | View Details |
| E04 |
Display shows E04 and cooking is aborted; often occurs after extended heating or high-temperature programs.
|
Bottom Temperature Sensor (NTC) Short / Overtemperature Detection | View Details |
| E05 |
Multicooker displays E05 and will not start pressure or high-heat programs.
|
Lid Temperature Sensor / Steam Cap Sensor Error | View Details |
| E06 |
Display shows E06; cooker may not heat or may shut off unexpectedly.
|
Heater Plate Overheat / Thermal Fuse Protection | View Details |
| E07 |
E07 appears when trying to start a pressure-cooking program; unit will not build pressure.
|
Pressure Sensor / Pressure Switch Error | View Details |
| E08 |
E08 error during pressure cooking; cooker may stop mid-cycle and release steam.
|
Abnormal Pressure Rise / Overpressure Detection | View Details |
| E09 |
E09 appears and cooker stops; often associated with power fluctuations or after plugging into a different outlet.
|
Input Power / Voltage Abnormality Detection | View Details |
| E10 |
E10 error appears; cooker may not respond to button presses or may freeze mid-operation.
|
Control Board Communication / CPU Error | View Details |
| H01 |
H01 code appears; cooker keeps food warm but will not enter cook mode.
|
Keep-Warm Circuit Only / Main Heater Disabled | View Details |
| H02 |
H02 code; cooker remains in warm mode and cannot be switched to certain programs.
|
Program Selection / Mode Lock Error | View Details |
| U01 |
Display shows U01 and cooker will not start; often accompanied by a beeping sound.
|
Lid Not Closed / Lock Not Engaged Warning | View Details |
| U02 |
U02 warning appears; cooker beeps and may not enter pressure mode.
|
Steam Cap / Vent Cap Not Installed or Misaligned | View Details |
| U03 |
U03 appears and cooker will not start; often when the inner pot is missing.
|
Inner Pot Missing / Incorrect Pot Warning | View Details |
| U04 |
U04 warning; cooker beeps and cancels pressure program before heating.
|
Lid Gasket / Packing Not Installed or Improperly Seated | View Details |
| – |
Buttons are unresponsive or require very hard pressing to register.
|
Keypad / Membrane Switch Wear | View Details |
| – |
Condensation collector frequently overflows, dripping water down the side of the cooker.
|
Condensation Management / Drainage Issue | View Details |
| – |
Display is dim, flickering, or segments are missing, but cooker still heats.
|
Display Module / LED-LCD Failure | View Details |
| – |
Excessive steam escapes continuously from the steam vent during pressure cooking; cooker struggles to reach or maintain pressure.
|
Pressure Loss / Vent Valve Not Sealing | View Details |
| – |
Grinding or scraping noise when opening or closing the lid.
|
Lid Hinge / Spring Mechanism Wear | View Details |
| – |
Inner pot nonstick coating is peeling, scratched, or flaking.
|
Inner Pot Coating Degradation | View Details |
| – |
Keep Warm mode is too cool; food becomes lukewarm or unsafe after a short time.
|
Keep-Warm Temperature Too Low | View Details |
| – |
Keep Warm mode overheats food, causing drying or burning over time.
|
Keep-Warm Temperature Too High | View Details |
| – |
Lid does not lock properly; can be opened easily during cooking.
|
Lid Lock Failure / Incomplete Engagement | View Details |
| – |
Lid will not open after cooking; feels stuck even after the cooker has cooled.
|
Lid Lock Jam / Float Valve Stuck | View Details |
| – |
Multicooker does not power on at all; no lights or display when plugged in.
|
No Power / Dead Unit | View Details |
| – |
Multicooker heats but never reaches a boil; rice remains undercooked or hard even after full cycle.
|
Insufficient Heating / Weak Heater Output | View Details |
| – |
Multicooker makes loud clicking, popping, or metallic noises during heating.
|
Thermal Expansion Noise / Pot and Heater Interaction | View Details |
| – |
Multicooker overheats; rice scorches or burns on the bottom while top remains undercooked.
|
Localized Overheating / Temperature Control Drift | View Details |
| – |
Multicooker powers on but will not start any cooking program; pressing Start does nothing or beeps only.
|
Start Inhibit / Safety Interlock Not Satisfied | View Details |
| – |
Multicooker shuts off unexpectedly in the middle of a cooking cycle and returns to standby or no display.
|
Intermittent Power Loss / Thermal Cutout | View Details |
| – |
Multicooker takes much longer than usual to cook the same recipe.
|
Extended Cooking Time / Slow Heating | View Details |
| – |
Persistent sour or rancid smell from inside the cooker even after normal cleaning.
|
Odor Contamination / Residual Oil and Food Deposits | View Details |
| – |
Rice comes out mushy or too soft even when using correct water level and program.
|
Overcooking / Temperature or Timing Miscalibration | View Details |
| – |
Unusual burning smell or electrical odor during operation.
|
Overheating Component / Electrical Insulation Breakdown | View Details |
| – |
Water or starchy liquid leaks from around the lid during cooking.
|
Lid Seal Leakage / Gasket Failure | View Details |
| – |
Water or steam leaks from the bottom of the multicooker onto the countertop.
|
Internal Leak / Condensation Misrouting | View Details |
No matching codes found
Advertisements