Fagor Dishwashers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Dishwasher beeps and shows E1; machine does not fill with water.
No Water Inlet Detected
E2
Dishwasher shows E2; water remains in the tub at the end of the cycle.
Drain Error
E3
Dishwasher displays E3; cycle ends quickly with dishes still dirty and cold.
Heating Timeout / No Temperature Rise
E4
Dishwasher shows E4; machine may continuously drain and not start washing.
Overflow / Leak Detected
E5
Dishwasher displays E5; unit may stop during filling or show irregular water levels.
Water Level Sensor / Pressure Switch Error
E6
Dishwasher shows E6; may not start or may stop during wash with no obvious mechanical issue.
Door Lock / Door Switch Fault
E7
Dishwasher displays E7; often associated with drying issues or fan noise problems.
Drying Fan / Ventilation Fault
E8
Dishwasher shows E8; water level appears too low and spray arms may not rotate properly.
Insufficient Water Level / Fill Volume Error
E9
Dishwasher displays E9; often associated with heater-integrated circulation pump issues.
Integrated Heater / Pump Assembly Fault
F1
Dishwasher will not start a cycle; F1 appears on the display shortly after pressing Start.
Water Inlet Timeout / Fill Fault
F10
Dishwasher shows F10; may not start or may stop shortly after starting, sometimes with no water entering.
Flow Meter / Water Intake Measurement Fault
F2
Dishwasher stops mid-cycle and displays F2; water remains in the tub and does not drain.
Drain Pump Fault / Drain Timeout
F3
Dishwasher displays F3 and stops; water inside is cold and dishes are not cleaned properly.
Heating Circuit Fault
F4
Dishwasher shows F4 and stops; water level appears too high or water is not pumped out correctly.
Water Level / Pressure Switch Fault
F5
Dishwasher displays F5; spray arms do not rotate properly and washing performance is poor.
Circulation Pump / Wash Motor Fault
F6
Dishwasher shows F6 and stops; often occurs at the beginning of the cycle after filling.
Turbidity / Water Quality Sensor Fault
F7
Dishwasher displays F7; machine may stop shortly after starting or during heating phase.
NTC Temperature Sensor Fault
F8
Dishwasher shows F8; often accompanied by water remaining in the base tray or repeated drain attempts.
Anti-Flood / Overflow Protection Activated
F9
Dishwasher displays F9; cycle may stop unexpectedly, often during drain or fill transitions.
Control Board / Program Fault
H1
Dishwasher shows H1; water overheats and there may be excessive steam when opening the door.
Overheating / Temperature Too High
H2
Dishwasher displays H2; water does not reach target temperature, but cycle may complete.
Underheating / Slow Heating
Symptom
Dishes come out dirty or with food residues after a full cycle.
Poor Wash Performance
Symptom
Dishwasher does not drain completely; a shallow pool of water remains under the filter after every cycle.
Partial Drain / Residual Water
Symptom
Dishwasher does not power on at all; no lights or display, even when door is closed.
No Power / Dead Appliance
Symptom
Dishwasher door drops down quickly or will not stay in the half-open position.
Door Spring / Hinge Cable Failure
Symptom
Dishwasher door is difficult to close or pops open during the cycle.
Door Alignment / Latch Engagement Issue
Symptom
Dishwasher fills with water but does not wash; spray arms remain still and there is no strong water noise.
Circulation Pump Not Running
Symptom
Dishwasher interior remains wet and dishes are not dry at the end of the cycle.
Poor Drying Performance
Symptom
Dishwasher leaks water from the bottom front of the door during the wash cycle.
Door Seal / Spray Pattern Leak
Symptom
Dishwasher leaks water from underneath the cabinet, often triggering the anti-flood system.
Internal Hose / Sump / Pump Leak
Symptom
Dishwasher makes loud grinding or rattling noises during wash or drain.
Foreign Object in Pump or Spray System
Symptom
Dishwasher powers on but will not start a cycle; Start button unresponsive or cycle cancels immediately.
User Interface / Control Panel Fault
Symptom
Dishwasher runs for an unusually long time or seems stuck on one part of the cycle.
Extended Cycle Time / Program Stalling
Symptom
Dishwasher stops mid-cycle and all lights flash, but no specific error code is shown.
Generic Fault / Safety Shutdown
Symptom
Dishwasher vibrates excessively or moves during operation.
Excessive Vibration / Poor Installation
Symptom
Glasses appear cloudy or have white film after washing.
Limescale / Hard Water Deposits
Symptom
Rinse aid or detergent dispenser does not open during the cycle; tablet remains in the cup.
Dispenser Door / Actuator Fault
Symptom
Strong bad smell when opening the dishwasher, even after a completed cycle.
Odor / Bacterial Growth in Sump
Symptom
Upper rack dishes remain dirty while lower rack is mostly clean.
Upper Spray Arm / Feed System Fault
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Dishwasher beeps and shows E1; machine does not fill with water.
|
No Water Inlet Detected | View Details |
| E2 |
Dishwasher shows E2; water remains in the tub at the end of the cycle.
|
Drain Error | View Details |
| E3 |
Dishwasher displays E3; cycle ends quickly with dishes still dirty and cold.
|
Heating Timeout / No Temperature Rise | View Details |
| E4 |
Dishwasher shows E4; machine may continuously drain and not start washing.
|
Overflow / Leak Detected | View Details |
| E5 |
Dishwasher displays E5; unit may stop during filling or show irregular water levels.
|
Water Level Sensor / Pressure Switch Error | View Details |
| E6 |
Dishwasher shows E6; may not start or may stop during wash with no obvious mechanical issue.
|
Door Lock / Door Switch Fault | View Details |
| E7 |
Dishwasher displays E7; often associated with drying issues or fan noise problems.
|
Drying Fan / Ventilation Fault | View Details |
| E8 |
Dishwasher shows E8; water level appears too low and spray arms may not rotate properly.
|
Insufficient Water Level / Fill Volume Error | View Details |
| E9 |
Dishwasher displays E9; often associated with heater-integrated circulation pump issues.
|
Integrated Heater / Pump Assembly Fault | View Details |
| F1 |
Dishwasher will not start a cycle; F1 appears on the display shortly after pressing Start.
|
Water Inlet Timeout / Fill Fault | View Details |
| F10 |
Dishwasher shows F10; may not start or may stop shortly after starting, sometimes with no water entering.
|
Flow Meter / Water Intake Measurement Fault | View Details |
| F2 |
Dishwasher stops mid-cycle and displays F2; water remains in the tub and does not drain.
|
Drain Pump Fault / Drain Timeout | View Details |
| F3 |
Dishwasher displays F3 and stops; water inside is cold and dishes are not cleaned properly.
|
Heating Circuit Fault | View Details |
| F4 |
Dishwasher shows F4 and stops; water level appears too high or water is not pumped out correctly.
|
Water Level / Pressure Switch Fault | View Details |
| F5 |
Dishwasher displays F5; spray arms do not rotate properly and washing performance is poor.
|
Circulation Pump / Wash Motor Fault | View Details |
| F6 |
Dishwasher shows F6 and stops; often occurs at the beginning of the cycle after filling.
|
Turbidity / Water Quality Sensor Fault | View Details |
| F7 |
Dishwasher displays F7; machine may stop shortly after starting or during heating phase.
|
NTC Temperature Sensor Fault | View Details |
| F8 |
Dishwasher shows F8; often accompanied by water remaining in the base tray or repeated drain attempts.
|
Anti-Flood / Overflow Protection Activated | View Details |
| F9 |
Dishwasher displays F9; cycle may stop unexpectedly, often during drain or fill transitions.
|
Control Board / Program Fault | View Details |
| H1 |
Dishwasher shows H1; water overheats and there may be excessive steam when opening the door.
|
Overheating / Temperature Too High | View Details |
| H2 |
Dishwasher displays H2; water does not reach target temperature, but cycle may complete.
|
Underheating / Slow Heating | View Details |
| – |
Dishes come out dirty or with food residues after a full cycle.
|
Poor Wash Performance | View Details |
| – |
Dishwasher does not drain completely; a shallow pool of water remains under the filter after every cycle.
|
Partial Drain / Residual Water | View Details |
| – |
Dishwasher does not power on at all; no lights or display, even when door is closed.
|
No Power / Dead Appliance | View Details |
| – |
Dishwasher door drops down quickly or will not stay in the half-open position.
|
Door Spring / Hinge Cable Failure | View Details |
| – |
Dishwasher door is difficult to close or pops open during the cycle.
|
Door Alignment / Latch Engagement Issue | View Details |
| – |
Dishwasher fills with water but does not wash; spray arms remain still and there is no strong water noise.
|
Circulation Pump Not Running | View Details |
| – |
Dishwasher interior remains wet and dishes are not dry at the end of the cycle.
|
Poor Drying Performance | View Details |
| – |
Dishwasher leaks water from the bottom front of the door during the wash cycle.
|
Door Seal / Spray Pattern Leak | View Details |
| – |
Dishwasher leaks water from underneath the cabinet, often triggering the anti-flood system.
|
Internal Hose / Sump / Pump Leak | View Details |
| – |
Dishwasher makes loud grinding or rattling noises during wash or drain.
|
Foreign Object in Pump or Spray System | View Details |
| – |
Dishwasher powers on but will not start a cycle; Start button unresponsive or cycle cancels immediately.
|
User Interface / Control Panel Fault | View Details |
| – |
Dishwasher runs for an unusually long time or seems stuck on one part of the cycle.
|
Extended Cycle Time / Program Stalling | View Details |
| – |
Dishwasher stops mid-cycle and all lights flash, but no specific error code is shown.
|
Generic Fault / Safety Shutdown | View Details |
| – |
Dishwasher vibrates excessively or moves during operation.
|
Excessive Vibration / Poor Installation | View Details |
| – |
Glasses appear cloudy or have white film after washing.
|
Limescale / Hard Water Deposits | View Details |
| – |
Rinse aid or detergent dispenser does not open during the cycle; tablet remains in the cup.
|
Dispenser Door / Actuator Fault | View Details |
| – |
Strong bad smell when opening the dishwasher, even after a completed cycle.
|
Odor / Bacterial Growth in Sump | View Details |
| – |
Upper rack dishes remain dirty while lower rack is mostly clean.
|
Upper Spray Arm / Feed System Fault | View Details |
No matching codes found
Advertisements