Gorenje Microwaves Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
dE
Microwave displays dE or DOOR and will not start any program.
Door Open Detection Fault
E1
Microwave will not start a cooking cycle and displays E1 on the control panel.
Door Interlock Switch Fault
E10
Microwave shows E10 and all functions are disabled.
Main Power Supply / Low Voltage Fault
E2
Microwave stops shortly after starting and displays E2 on the control panel.
Temperature Sensor / NTC Fault
E3
Microwave does not heat and shows E3 after a few seconds of operation.
Magnetron / High-Voltage Circuit Fault
E4
Microwave displays E4 and will not start any cooking program.
Humidity / Steam Sensor Fault
E5
Microwave shows E5 and stops heating shortly after start.
Cooling Fan or Airflow Fault
E6
Microwave beeps and displays E6; keypad and functions may be unresponsive or erratic.
Control Panel / Touchpad Communication Fault
E7
Microwave displays E7 and will not start; sometimes accompanied by interior light flickering.
Door Sensing / Monitor Circuit Error
E8
Microwave shows E8 and convection or grill functions do not operate correctly (on combination models).
Convection Temperature Sensor / Overheat Fault
E9
Microwave displays E9 and grill function will not start (on grill/combination models).
Grill Heater Circuit Fault
Err
Microwave briefly displays Err or ERROR and then stops responding or resets.
General Control System Error
H0
Microwave shows H0 or HO and does not heat, even though the timer counts down.
High-Voltage System Protection / Overheat
LOC
Microwave displays LOC or a key symbol and will not start; buttons seem disabled.
Child Lock / Control Lock Activated
PF
Microwave displays PF or 8888 after a power interruption and may not respond until cleared.
Power Failure / Reset Condition
SE
Microwave beeps repeatedly and displays SE; keys may appear to press themselves.
Keypad Stuck / Shorted Touchpad
Symptom
Microwave clock or display is dim, missing segments, or unreadable.
Display Module Degradation
Symptom
Microwave convection fan runs but does not reach or maintain set temperature (on convection models).
Convection Heating Underperformance
Symptom
Microwave display works but pressing START does nothing; timer does not count down.
Start Circuit / Keypad Input Failure
Symptom
Microwave display works but time or power level cannot be adjusted; some buttons do not respond.
Partial Keypad Failure
Symptom
Microwave does not start at all; display is blank and no lights or sounds occur.
No Power / Dead Appliance
Symptom
Microwave door does not close properly or sags; cooking may stop when door is touched.
Door Alignment / Hinge Wear
Symptom
Microwave door will not open or is stuck closed after cooking.
Door Latch Mechanism Jammed
Symptom
Microwave emits a burning smell or smoke during operation.
Overheating or Component Burning
Symptom
Microwave emits loud popping or crackling sounds when cooking certain foods.
Food-Related Arcing / Moisture Boiling
Symptom
Microwave grill function works, but microwave heating does not (on combination models).
Microwave Generation Failure with Grill OK
Symptom
Microwave heats unevenly; some areas of food are cold while others are very hot.
Uneven Heating / Standing Wave Pattern
Symptom
Microwave interior light and display flicker or dim when cooking.
Voltage Drop or Loose Connection
Symptom
Microwave interior light does not turn on, but unit heats and operates normally.
Cavity Lamp Failure
Symptom
Microwave leaks water or condensation onto the worktop or inside the cabinet.
Condensation Management / Drainage Issue
Symptom
Microwave light stays on even when the door is closed and not cooking.
Stuck Lamp Relay or Door Switch Fault
Symptom
Microwave makes rattling or vibrating noises during operation.
Mechanical Vibration / Loose Components
Symptom
Microwave produces sparks or arcing inside the cavity during cooking.
Cavity Arcing / Waveguide Contamination
Symptom
Microwave runs (light on, turntable rotates, fan runs) but food does not heat.
No Heating – High-Voltage Circuit Failure
Symptom
Microwave runs but fan does not operate; cavity becomes very hot externally.
Cooling Fan Not Running
Symptom
Microwave runs but makes loud humming, buzzing, or growling noises, louder than usual.
Abnormal Noise from High-Voltage Transformer or Magnetron
Symptom
Microwave stops mid-cycle and completely shuts off, then comes back on after cooling.
Thermal Overload / Overheating Protection
Symptom
Microwave trips the household circuit breaker or blows a fuse when starting.
Short Circuit or Overcurrent on Start-Up
Symptom
Microwave turntable does not rotate, but heating and other functions work.
Turntable Drive Failure
Symptom
Turntable rotates intermittently or with jerky motion; sometimes stops under load.
Turntable Mechanical Binding
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| dE |
Microwave displays dE or DOOR and will not start any program.
|
Door Open Detection Fault | View Details |
| E1 |
Microwave will not start a cooking cycle and displays E1 on the control panel.
|
Door Interlock Switch Fault | View Details |
| E10 |
Microwave shows E10 and all functions are disabled.
|
Main Power Supply / Low Voltage Fault | View Details |
| E2 |
Microwave stops shortly after starting and displays E2 on the control panel.
|
Temperature Sensor / NTC Fault | View Details |
| E3 |
Microwave does not heat and shows E3 after a few seconds of operation.
|
Magnetron / High-Voltage Circuit Fault | View Details |
| E4 |
Microwave displays E4 and will not start any cooking program.
|
Humidity / Steam Sensor Fault | View Details |
| E5 |
Microwave shows E5 and stops heating shortly after start.
|
Cooling Fan or Airflow Fault | View Details |
| E6 |
Microwave beeps and displays E6; keypad and functions may be unresponsive or erratic.
|
Control Panel / Touchpad Communication Fault | View Details |
| E7 |
Microwave displays E7 and will not start; sometimes accompanied by interior light flickering.
|
Door Sensing / Monitor Circuit Error | View Details |
| E8 |
Microwave shows E8 and convection or grill functions do not operate correctly (on combination models).
|
Convection Temperature Sensor / Overheat Fault | View Details |
| E9 |
Microwave displays E9 and grill function will not start (on grill/combination models).
|
Grill Heater Circuit Fault | View Details |
| Err |
Microwave briefly displays Err or ERROR and then stops responding or resets.
|
General Control System Error | View Details |
| H0 |
Microwave shows H0 or HO and does not heat, even though the timer counts down.
|
High-Voltage System Protection / Overheat | View Details |
| LOC |
Microwave displays LOC or a key symbol and will not start; buttons seem disabled.
|
Child Lock / Control Lock Activated | View Details |
| PF |
Microwave displays PF or 8888 after a power interruption and may not respond until cleared.
|
Power Failure / Reset Condition | View Details |
| SE |
Microwave beeps repeatedly and displays SE; keys may appear to press themselves.
|
Keypad Stuck / Shorted Touchpad | View Details |
| – |
Microwave clock or display is dim, missing segments, or unreadable.
|
Display Module Degradation | View Details |
| – |
Microwave convection fan runs but does not reach or maintain set temperature (on convection models).
|
Convection Heating Underperformance | View Details |
| – |
Microwave display works but pressing START does nothing; timer does not count down.
|
Start Circuit / Keypad Input Failure | View Details |
| – |
Microwave display works but time or power level cannot be adjusted; some buttons do not respond.
|
Partial Keypad Failure | View Details |
| – |
Microwave does not start at all; display is blank and no lights or sounds occur.
|
No Power / Dead Appliance | View Details |
| – |
Microwave door does not close properly or sags; cooking may stop when door is touched.
|
Door Alignment / Hinge Wear | View Details |
| – |
Microwave door will not open or is stuck closed after cooking.
|
Door Latch Mechanism Jammed | View Details |
| – |
Microwave emits a burning smell or smoke during operation.
|
Overheating or Component Burning | View Details |
| – |
Microwave emits loud popping or crackling sounds when cooking certain foods.
|
Food-Related Arcing / Moisture Boiling | View Details |
| – |
Microwave grill function works, but microwave heating does not (on combination models).
|
Microwave Generation Failure with Grill OK | View Details |
| – |
Microwave heats unevenly; some areas of food are cold while others are very hot.
|
Uneven Heating / Standing Wave Pattern | View Details |
| – |
Microwave interior light and display flicker or dim when cooking.
|
Voltage Drop or Loose Connection | View Details |
| – |
Microwave interior light does not turn on, but unit heats and operates normally.
|
Cavity Lamp Failure | View Details |
| – |
Microwave leaks water or condensation onto the worktop or inside the cabinet.
|
Condensation Management / Drainage Issue | View Details |
| – |
Microwave light stays on even when the door is closed and not cooking.
|
Stuck Lamp Relay or Door Switch Fault | View Details |
| – |
Microwave makes rattling or vibrating noises during operation.
|
Mechanical Vibration / Loose Components | View Details |
| – |
Microwave produces sparks or arcing inside the cavity during cooking.
|
Cavity Arcing / Waveguide Contamination | View Details |
| – |
Microwave runs (light on, turntable rotates, fan runs) but food does not heat.
|
No Heating – High-Voltage Circuit Failure | View Details |
| – |
Microwave runs but fan does not operate; cavity becomes very hot externally.
|
Cooling Fan Not Running | View Details |
| – |
Microwave runs but makes loud humming, buzzing, or growling noises, louder than usual.
|
Abnormal Noise from High-Voltage Transformer or Magnetron | View Details |
| – |
Microwave stops mid-cycle and completely shuts off, then comes back on after cooling.
|
Thermal Overload / Overheating Protection | View Details |
| – |
Microwave trips the household circuit breaker or blows a fuse when starting.
|
Short Circuit or Overcurrent on Start-Up | View Details |
| – |
Microwave turntable does not rotate, but heating and other functions work.
|
Turntable Drive Failure | View Details |
| – |
Turntable rotates intermittently or with jerky motion; sometimes stops under load.
|
Turntable Mechanical Binding | View Details |
No matching codes found
Advertisements