Belling Ovens Error Codes

F01

Oven will not heat at all in any mode; display is on but no warmth from cavity.

Main Oven Heating Circuit Failure

F02

Fan oven not heating but fan runs normally; food remains uncooked.

Fan Oven Element Failure

F03

Grill will not heat or only heats very weakly; oven functions may still work.

Grill Element Circuit Fault

F04

Oven overheats, burning food; temperature far higher than set; may trip safety thermostat.

Temperature Regulation Failure

F05

Display shows error and oven will not start; temperature reading seems incorrect or fluctuates rapidly.

Oven Temperature Sensor Circuit Fault

F06

Oven display or clock not responding correctly; buttons may not work or random beeping occurs.

User Interface / Touch Control Fault

F07

Oven cuts out during cooking and then comes back on after cooling; may show an error code when hot.

Thermal Cut-Out / Safety Thermostat Trip

F08

Oven fan does not run in fan modes; oven may overheat locally or cook unevenly.

Oven Circulation Fan Motor Failure

F09

Clock or timer display blank; oven functions disabled on models that require clock setting.

Clock / Timer Power or Communication Fault

F10

Oven will not start; display shows a door-related error or beeps when trying to start (on models with door switch monitoring).

Door Switch / Door Lock Detection Fault

F11

Self-clean or pyrolytic cycle will not start (on pyrolytic Belling models); error displayed when attempting to lock door.

Pyrolytic Door Lock Fault

F12

Oven lights, fan, or other functions operate unexpectedly or not at all; error indicates auxiliary circuit fault.

Auxiliary Output Relay / Circuit Fault

F13

Oven display shows communication error; some functions may be disabled.

Communication Fault Between Control Boards

F14

Oven will not ignite on gas Belling models; electronic display shows ignition fault.

Gas Ignition Failure

F15

Gas oven lights but then goes out after a few seconds; error indicates flame supervision fault.

Flame Failure Device / Thermocouple Fault

F16

Oven interior light not working; error may indicate lamp circuit fault on some electronic models.

Oven Lamp Circuit Failure

F17

Cooling fan runs continuously even when oven is cold and off; error indicates cooling system fault.

Cooling Fan Control Fault

F18

Oven beeps and shows a probe or sensor error when using meat probe or temperature probe feature (if fitted).

Food Probe / Auxiliary Sensor Fault

F19

Oven shows power supply or voltage error; may shut down or refuse to start.

Mains Supply / Power Regulation Fault

F20

Oven shows generic fault code and locks out most functions after a power surge or outage.

General Control System Fault

Symptom

Control knobs become very hot to touch during cooking.

Insufficient Cooling / Heat Migration to Control Panel

Symptom

Digital clock or timer display is dim, flickering, or partially missing segments.

Display Module Degradation

Symptom

Excessive condensation or steam on the oven door and control panel during cooking.

Ventilation / Steam Management Issue

Symptom

Grill overheats or burns food quickly even on low settings.

Grill Thermostat or Control Fault

Symptom

Grill works but main oven does not heat; no error code.

Main Oven Element or Thermostat Failure

Symptom

Oven door will not close properly; heat escapes and cooking is uneven.

Door Alignment / Hinge or Seal Failure

Symptom

Oven door will not open after cooking; no error code displayed.

Door Latch Jam or Thermal Lock Retention

Symptom

Oven enamel interior is chipped or rusting; may lead to staining or flaking.

Cavity Enamel Damage

Symptom

Oven fan runs but there is no heat in fan-assisted modes; conventional heat may still work.

Fan Element Failure with Working Conventional Elements

Symptom

Oven glass door is cracked or shattered, but oven still operates.

Door Glass Damage

Symptom

Oven heats but takes a very long time to reach temperature; food undercooked or cooking times much longer than normal.

Partial Heating / Weak Element Output

Symptom

Oven heats but temperature is inaccurate; either consistently too hot or too cold compared to the setting.

Temperature Calibration / Thermostat Drift

Symptom

Oven interior light does not work but all heating functions are normal.

Lamp or Lamp Holder Failure

Symptom

Oven light works but none of the heating functions operate; selector seems dead.

Function Selector Switch Failure

Symptom

Oven makes loud rattling, scraping, or humming noises during operation.

Mechanical Noise from Fan or Panels

Symptom

Oven not heating at all, no error code displayed; fan and light may still work.

Open Heating Circuit Without Electronic Detection

Symptom

Oven produces a burning smell or smoke when in use.

Contamination or Overheating of Internal Components

Symptom

Oven racks or side supports have collapsed or will not stay in place.

Rack Support or Side Rail Failure

Symptom

Oven randomly turns off during cooking without tripping the breaker; comes back on after a while.

Intermittent Thermal Cut-Out or Loose Connection

Symptom

Oven trips the household circuit breaker or RCD when turned on or when heating.

Electrical Short or Earth Leakage

Symptom

Oven will not start because the clock is flashing or not set; no heating until time is programmed.

Clock Not Set Lockout