Gorenje Washing Machines Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Washer displays E1 and does not fill with water.
Water Inlet Timeout
E2
Washer displays E2 and stops with water in the drum.
Drain Error
E3
Washer displays E3, drum does not spin properly or stops unexpectedly.
Motor / Speed Error
E4
Washer displays E4 and may vibrate excessively or refuse to spin.
Unbalanced Load Detection
E5
Washer displays E5, water temperature not reaching setpoint.
Heating Timeout
E6
Washer displays E6, often related to door lock issues.
Door Lock Error
E7
Washer displays E7, water level reading abnormal.
Water Level Sensor Fault
E8
Washer displays E8, often linked to overflow or excessive water level.
Overflow / Overfill Error
E9
Washer displays E9, often associated with leakage detection.
Leak / Anti-Flood Error
F1
Washer will not start cycle, display shows F1 shortly after pressing Start.
Water Inlet Fault / No Fill
F10
Washer does not drain or spin, display shows F10, sometimes after heavy loads.
Drain Time-Out / Slow Drain
F11
Washer displays F11 and will not start or complete cycle, often related to communication issues.
Control Board Communication Error
F12
Washer shows F12, may not respond to button presses or program selection.
User Interface / Display Board Error
F13
Washer shows F13, often related to door not unlocking at end of cycle.
Door Unlock Fault
F14
Washer shows F14, often associated with heating or temperature sensing issues.
NTC Temperature Sensor Error
F15
Washer shows F15, may stop during spin or not reach full speed.
Unbalanced Load / Spin Control Error
F16
Washer shows F16, drum does not rotate, often on models with electronic motor control.
Inverter / Motor Control Error
F17
Washer shows F17, often related to door not closing properly at start.
Door Not Closed / Door Switch Error
F18
Washer shows F18, often associated with mains power or voltage issues.
Power Supply / Voltage Error
F2
Washer stops mid-cycle or will not start, display shows F2, drum does not fill correctly.
Water Level Sensor / Pressure Switch Error
F3
Washer does not heat water, cycle takes unusually long, display shows F3.
Heating Circuit Failure
F4
Washer stops with water remaining in drum, display shows F4, no drain sound.
Drain Pump Failure / Drainage Error
F5
Washer door will not lock or cycle will not start, display shows F5.
Door Lock / Interlock Failure
F6
Washer does not spin or agitate, display shows F6.
Motor Drive Fault
F7
Washer stops during cycle, may not spin, display shows F7.
Tachometer / Speed Sensor Error
F8
Washer overfills or shows F8, water level too high or continuous filling.
Overfill / Overflow Protection Error
F9
Washer stops and displays F9, often associated with water leakage or base pan full of water.
Leakage / Anti-Flood System Activated
Symptom
Detergent remains in the drawer after the wash, or water overflows from the dispenser.
Detergent Dispenser / Drawer Blockage
Symptom
Washer displays incorrect time remaining or behaves erratically (random resets, lights flicker).
Control Logic / Software Anomaly
Symptom
Washer does not spin or spins only very slowly, clothes come out very wet.
No or Poor Final Spin
Symptom
Washer door will not open at the end of the cycle, no error code shown.
Door Stuck / Lock Not Releasing
Symptom
Washer drum has difficulty turning by hand, scraping or grinding noise even when off.
Foreign Object Between Drum and Tub
Symptom
Washer emits a burning smell during operation.
Overheating Component / Electrical Smell
Symptom
Washer fills with water but drum does not turn during wash.
No Wash Agitation / Drum Not Turning
Symptom
Washer has a strong musty or moldy smell inside the drum.
Biofilm / Mold Build-Up
Symptom
Washer is dead, no lights or display, does not respond to any buttons.
No Power / Dead Appliance
Symptom
Washer is very noisy during spin, with rumbling or roaring sound.
Drum Bearing Wear / Failure
Symptom
Washer leaks water from the front door area during wash.
Door Gasket / Bellows Leak
Symptom
Washer leaves clothes with detergent stains or white streaks after washing.
Poor Rinsing / Detergent Residue
Symptom
Washer makes loud banging or knocking noises during spin, machine moves across the floor.
Excessive Vibration / Suspension Fault
Symptom
Washer powers on but will not start any program when Start button is pressed.
Start Inhibit / Program Not Initiating
Symptom
Washer takes much longer than the displayed time to complete a cycle.
Extended Cycle Time / Adaptive Control
Symptom
Washer trips the household circuit breaker or RCD during operation.
Electrical Short / Earth Leakage
Symptom
Water leaks from underneath the washer, especially during drain or spin.
Internal Hose or Pump Leak
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Washer displays E1 and does not fill with water.
|
Water Inlet Timeout | View Details |
| E2 |
Washer displays E2 and stops with water in the drum.
|
Drain Error | View Details |
| E3 |
Washer displays E3, drum does not spin properly or stops unexpectedly.
|
Motor / Speed Error | View Details |
| E4 |
Washer displays E4 and may vibrate excessively or refuse to spin.
|
Unbalanced Load Detection | View Details |
| E5 |
Washer displays E5, water temperature not reaching setpoint.
|
Heating Timeout | View Details |
| E6 |
Washer displays E6, often related to door lock issues.
|
Door Lock Error | View Details |
| E7 |
Washer displays E7, water level reading abnormal.
|
Water Level Sensor Fault | View Details |
| E8 |
Washer displays E8, often linked to overflow or excessive water level.
|
Overflow / Overfill Error | View Details |
| E9 |
Washer displays E9, often associated with leakage detection.
|
Leak / Anti-Flood Error | View Details |
| F1 |
Washer will not start cycle, display shows F1 shortly after pressing Start.
|
Water Inlet Fault / No Fill | View Details |
| F10 |
Washer does not drain or spin, display shows F10, sometimes after heavy loads.
|
Drain Time-Out / Slow Drain | View Details |
| F11 |
Washer displays F11 and will not start or complete cycle, often related to communication issues.
|
Control Board Communication Error | View Details |
| F12 |
Washer shows F12, may not respond to button presses or program selection.
|
User Interface / Display Board Error | View Details |
| F13 |
Washer shows F13, often related to door not unlocking at end of cycle.
|
Door Unlock Fault | View Details |
| F14 |
Washer shows F14, often associated with heating or temperature sensing issues.
|
NTC Temperature Sensor Error | View Details |
| F15 |
Washer shows F15, may stop during spin or not reach full speed.
|
Unbalanced Load / Spin Control Error | View Details |
| F16 |
Washer shows F16, drum does not rotate, often on models with electronic motor control.
|
Inverter / Motor Control Error | View Details |
| F17 |
Washer shows F17, often related to door not closing properly at start.
|
Door Not Closed / Door Switch Error | View Details |
| F18 |
Washer shows F18, often associated with mains power or voltage issues.
|
Power Supply / Voltage Error | View Details |
| F2 |
Washer stops mid-cycle or will not start, display shows F2, drum does not fill correctly.
|
Water Level Sensor / Pressure Switch Error | View Details |
| F3 |
Washer does not heat water, cycle takes unusually long, display shows F3.
|
Heating Circuit Failure | View Details |
| F4 |
Washer stops with water remaining in drum, display shows F4, no drain sound.
|
Drain Pump Failure / Drainage Error | View Details |
| F5 |
Washer door will not lock or cycle will not start, display shows F5.
|
Door Lock / Interlock Failure | View Details |
| F6 |
Washer does not spin or agitate, display shows F6.
|
Motor Drive Fault | View Details |
| F7 |
Washer stops during cycle, may not spin, display shows F7.
|
Tachometer / Speed Sensor Error | View Details |
| F8 |
Washer overfills or shows F8, water level too high or continuous filling.
|
Overfill / Overflow Protection Error | View Details |
| F9 |
Washer stops and displays F9, often associated with water leakage or base pan full of water.
|
Leakage / Anti-Flood System Activated | View Details |
| – |
Detergent remains in the drawer after the wash, or water overflows from the dispenser.
|
Detergent Dispenser / Drawer Blockage | View Details |
| – |
Washer displays incorrect time remaining or behaves erratically (random resets, lights flicker).
|
Control Logic / Software Anomaly | View Details |
| – |
Washer does not spin or spins only very slowly, clothes come out very wet.
|
No or Poor Final Spin | View Details |
| – |
Washer door will not open at the end of the cycle, no error code shown.
|
Door Stuck / Lock Not Releasing | View Details |
| – |
Washer drum has difficulty turning by hand, scraping or grinding noise even when off.
|
Foreign Object Between Drum and Tub | View Details |
| – |
Washer emits a burning smell during operation.
|
Overheating Component / Electrical Smell | View Details |
| – |
Washer fills with water but drum does not turn during wash.
|
No Wash Agitation / Drum Not Turning | View Details |
| – |
Washer has a strong musty or moldy smell inside the drum.
|
Biofilm / Mold Build-Up | View Details |
| – |
Washer is dead, no lights or display, does not respond to any buttons.
|
No Power / Dead Appliance | View Details |
| – |
Washer is very noisy during spin, with rumbling or roaring sound.
|
Drum Bearing Wear / Failure | View Details |
| – |
Washer leaks water from the front door area during wash.
|
Door Gasket / Bellows Leak | View Details |
| – |
Washer leaves clothes with detergent stains or white streaks after washing.
|
Poor Rinsing / Detergent Residue | View Details |
| – |
Washer makes loud banging or knocking noises during spin, machine moves across the floor.
|
Excessive Vibration / Suspension Fault | View Details |
| – |
Washer powers on but will not start any program when Start button is pressed.
|
Start Inhibit / Program Not Initiating | View Details |
| – |
Washer takes much longer than the displayed time to complete a cycle.
|
Extended Cycle Time / Adaptive Control | View Details |
| – |
Washer trips the household circuit breaker or RCD during operation.
|
Electrical Short / Earth Leakage | View Details |
| – |
Water leaks from underneath the washer, especially during drain or spin.
|
Internal Hose or Pump Leak | View Details |
No matching codes found
Advertisements