Vida by PADERNO
Vida by PADERNO Air Fryers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Air fryer will not start; display shows E1 immediately after power-on or when pressing Start.
NTC Temperature Sensor Open Circuit
E10
Air fryer displays E10 and shuts off shortly after starting, often with a strong hot smell.
Exhaust Temperature Sensor Fault / Overheat at Exhaust
E2
Air fryer stops heating during a cycle and displays E2 on the control panel.
NTC Temperature Sensor Short Circuit
E3
Display shows E3 and the air fryer overheats quickly or shuts down shortly after starting.
Overtemperature Protection / High Temperature Fault
E4
Air fryer displays E4 and will not start or stops mid-cycle, often after long cooking sessions.
Overheat Protection / Thermal Fuse Open
E5
Display shows E5 and the unit will not heat, though the fan may still run.
Heating Element Circuit Fault
E6
Air fryer beeps and shows E6; fan may not start or stops intermittently during cooking.
Convection Fan Motor Fault
E7
Display shows E7 and the unit will not start; sometimes accompanied by a rapid beeping.
Door / Basket Detection Fault
E8
Air fryer shows E8 and shuts down or will not start; sometimes occurs after a power surge.
Main Control Board Power Supply Fault
E9
Display shows E9 and the unit may beep continuously; controls may be unresponsive.
Keypad / Touch Panel Communication Error
H0
Display shows H0 or a similar code and the unit will not heat, though the display and fan may operate.
Heater Relay Stuck Open / Heater Drive Fault
H1
Display shows H1 or similar and the unit overheats or cycles erratically, sometimes with very high temperatures.
Heater Relay Stuck Closed / Uncontrolled Heating
P1
Display shows P1 and the unit will not start; often associated with unstable mains voltage.
Input Voltage Out of Range
P2
Display shows P2 and the unit shuts down unexpectedly during cooking.
Internal Overcurrent / Power Protection Trip
Symptom
Air fryer display flickers or resets during cooking; unit may shut off and restart.
Intermittent Power or Control Board Fault
Symptom
Air fryer does not power on at all; no lights or display when plugged in.
No Power / Dead Unit
Symptom
Air fryer emits a burning plastic or electrical smell during use.
Overheating Wiring or Component
Symptom
Air fryer fan does not run; unit may heat slightly but cooks unevenly and may overheat.
Convection Fan Not Running
Symptom
Air fryer fan is very loud, grinding, or rattling during operation.
Convection Fan Mechanical Noise
Symptom
Air fryer leaks oil or liquid from the bottom during or after cooking.
Basket/Drawer Seal or Coating Failure
Symptom
Air fryer overheats and burns food even when set to a low temperature; exterior may feel excessively hot.
Temperature Regulation Failure
Symptom
Air fryer powers on but will not start cooking; pressing Start does nothing and no error code is shown.
Control Logic / Start Circuit Fault
Symptom
Air fryer runs but does not heat; fan operates and timer counts down, but food remains cold.
No Heat / Open Heater Circuit
Symptom
Air fryer trips the household circuit breaker or GFCI when starting or during cooking.
Electrical Short or Ground Fault
Symptom
Beeping continues after cooking is finished and does not stop as expected.
End-of-Cycle Alarm Stuck
Symptom
Buttons on the control panel are unresponsive or only some keys work.
Touch Panel Key Failure
Symptom
Condensation or steam appears on the control panel or around the display during cooking.
Steam Ingress / Inadequate Venting
Symptom
Display is very dim or segments are missing, but the unit still operates.
LED Display Degradation or Connection Fault
Symptom
Display shows random characters or garbled segments, but the unit may still heat.
Display Data Corruption / Control Board Fault
Symptom
Drawer/basket pops out slightly during cooking or does not latch securely.
Drawer Latch / Door Switch Actuator Fault
Symptom
Drawer/basket will not fully close or is difficult to insert.
Drawer Alignment / Rail Obstruction
Symptom
Excessive smoke from the air fryer during cooking, especially with fatty foods.
Grease Accumulation / High-Fat Cooking Smoke
Symptom
Food cooks unevenly; some areas are burnt while others are undercooked.
Uneven Airflow or Temperature Distribution
Symptom
Non-stick coating on basket or drawer is peeling or flaking.
Coating Degradation
Symptom
Outer surfaces of the air fryer become extremely hot to the touch during normal use.
Insulation or Airflow Deficiency
Symptom
Persistent bad odor (rancid or chemical) from the air fryer even when not cooking.
Contaminated Interior or Degraded Coatings
Symptom
Rattling or buzzing noise from inside the unit even when the fan seems fine.
Loose Internal Component or Panel
Symptom
Timer counts down too fast or too slow compared to real time.
Control Board Timing Circuit Fault
Symptom
Unit shuts off mid-cycle and will not restart until it cools down.
Thermal Cutout Activation
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Air fryer will not start; display shows E1 immediately after power-on or when pressing Start.
|
NTC Temperature Sensor Open Circuit | View Details |
| E10 |
Air fryer displays E10 and shuts off shortly after starting, often with a strong hot smell.
|
Exhaust Temperature Sensor Fault / Overheat at Exhaust | View Details |
| E2 |
Air fryer stops heating during a cycle and displays E2 on the control panel.
|
NTC Temperature Sensor Short Circuit | View Details |
| E3 |
Display shows E3 and the air fryer overheats quickly or shuts down shortly after starting.
|
Overtemperature Protection / High Temperature Fault | View Details |
| E4 |
Air fryer displays E4 and will not start or stops mid-cycle, often after long cooking sessions.
|
Overheat Protection / Thermal Fuse Open | View Details |
| E5 |
Display shows E5 and the unit will not heat, though the fan may still run.
|
Heating Element Circuit Fault | View Details |
| E6 |
Air fryer beeps and shows E6; fan may not start or stops intermittently during cooking.
|
Convection Fan Motor Fault | View Details |
| E7 |
Display shows E7 and the unit will not start; sometimes accompanied by a rapid beeping.
|
Door / Basket Detection Fault | View Details |
| E8 |
Air fryer shows E8 and shuts down or will not start; sometimes occurs after a power surge.
|
Main Control Board Power Supply Fault | View Details |
| E9 |
Display shows E9 and the unit may beep continuously; controls may be unresponsive.
|
Keypad / Touch Panel Communication Error | View Details |
| H0 |
Display shows H0 or a similar code and the unit will not heat, though the display and fan may operate.
|
Heater Relay Stuck Open / Heater Drive Fault | View Details |
| H1 |
Display shows H1 or similar and the unit overheats or cycles erratically, sometimes with very high temperatures.
|
Heater Relay Stuck Closed / Uncontrolled Heating | View Details |
| P1 |
Display shows P1 and the unit will not start; often associated with unstable mains voltage.
|
Input Voltage Out of Range | View Details |
| P2 |
Display shows P2 and the unit shuts down unexpectedly during cooking.
|
Internal Overcurrent / Power Protection Trip | View Details |
| – |
Air fryer display flickers or resets during cooking; unit may shut off and restart.
|
Intermittent Power or Control Board Fault | View Details |
| – |
Air fryer does not power on at all; no lights or display when plugged in.
|
No Power / Dead Unit | View Details |
| – |
Air fryer emits a burning plastic or electrical smell during use.
|
Overheating Wiring or Component | View Details |
| – |
Air fryer fan does not run; unit may heat slightly but cooks unevenly and may overheat.
|
Convection Fan Not Running | View Details |
| – |
Air fryer fan is very loud, grinding, or rattling during operation.
|
Convection Fan Mechanical Noise | View Details |
| – |
Air fryer leaks oil or liquid from the bottom during or after cooking.
|
Basket/Drawer Seal or Coating Failure | View Details |
| – |
Air fryer overheats and burns food even when set to a low temperature; exterior may feel excessively hot.
|
Temperature Regulation Failure | View Details |
| – |
Air fryer powers on but will not start cooking; pressing Start does nothing and no error code is shown.
|
Control Logic / Start Circuit Fault | View Details |
| – |
Air fryer runs but does not heat; fan operates and timer counts down, but food remains cold.
|
No Heat / Open Heater Circuit | View Details |
| – |
Air fryer trips the household circuit breaker or GFCI when starting or during cooking.
|
Electrical Short or Ground Fault | View Details |
| – |
Beeping continues after cooking is finished and does not stop as expected.
|
End-of-Cycle Alarm Stuck | View Details |
| – |
Buttons on the control panel are unresponsive or only some keys work.
|
Touch Panel Key Failure | View Details |
| – |
Condensation or steam appears on the control panel or around the display during cooking.
|
Steam Ingress / Inadequate Venting | View Details |
| – |
Display is very dim or segments are missing, but the unit still operates.
|
LED Display Degradation or Connection Fault | View Details |
| – |
Display shows random characters or garbled segments, but the unit may still heat.
|
Display Data Corruption / Control Board Fault | View Details |
| – |
Drawer/basket pops out slightly during cooking or does not latch securely.
|
Drawer Latch / Door Switch Actuator Fault | View Details |
| – |
Drawer/basket will not fully close or is difficult to insert.
|
Drawer Alignment / Rail Obstruction | View Details |
| – |
Excessive smoke from the air fryer during cooking, especially with fatty foods.
|
Grease Accumulation / High-Fat Cooking Smoke | View Details |
| – |
Food cooks unevenly; some areas are burnt while others are undercooked.
|
Uneven Airflow or Temperature Distribution | View Details |
| – |
Non-stick coating on basket or drawer is peeling or flaking.
|
Coating Degradation | View Details |
| – |
Outer surfaces of the air fryer become extremely hot to the touch during normal use.
|
Insulation or Airflow Deficiency | View Details |
| – |
Persistent bad odor (rancid or chemical) from the air fryer even when not cooking.
|
Contaminated Interior or Degraded Coatings | View Details |
| – |
Rattling or buzzing noise from inside the unit even when the fan seems fine.
|
Loose Internal Component or Panel | View Details |
| – |
Timer counts down too fast or too slow compared to real time.
|
Control Board Timing Circuit Fault | View Details |
| – |
Unit shuts off mid-cycle and will not restart until it cools down.
|
Thermal Cutout Activation | View Details |
No matching codes found
Advertisements