Gevi
Gevi Ice Makers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
ADD
Display shows 'ADD' or 'ADD WATER'; unit beeps and stops making ice.
Low Water Level Detected
CLEAN
Display shows 'CLEAN' or cleaning indicator light stays on; unit may still make ice but prompts for cleaning.
Cleaning Cycle Reminder / Scale Buildup Detection
E1
Ice maker stops and displays E1; unit may still power on but will not start ice-making cycle.
Ambient Temperature Sensor Fault
E2
Display shows E2 and ice production stops; fan may still run but unit will not start freezing cycle.
Evaporator Temperature Sensor Fault
E3
E3 error on display; ice maker may start but stops mid-cycle or fails to harvest ice.
Ice Full / Bin Level Sensor Fault
E4
E4 error appears and the unit stops; often associated with abnormal ice size or incomplete freezing.
Ice Thickness / Harvest Sensor Fault
E5
E5 error code; compressor may not start or shuts down quickly, and no ice is produced.
Compressor Overload / High Temperature Protection
E6
E6 error displayed; unit may power on but water does not circulate properly and ice production stops.
Water Pump Circuit Fault
E7
E7 error appears; unit may stop mid-cycle and not restart until power is cycled.
Water Level Sensor / Float Switch Fault
E8
E8 error code; unit may beep continuously and stop making ice, often associated with very low or very high ambient temperature.
Abnormal Ambient Temperature Protection
E9
E9 error displayed; unit may not fill with water or may overfill and trigger an alarm.
Water Inlet Valve / Fill System Fault
ICE FULL
Display shows 'ICE FULL' or 'FULL'; unit stops making ice even though the basket may not be completely full.
Ice Bin Full Detection Triggered
Symptom
Buttons on the control panel do not respond or respond intermittently.
Control Panel / Keypad Failure
Symptom
Display is dim, flickering, or partially unreadable.
Display Module or Power Supply Issue
Symptom
Ice appears cloudy or white instead of clear.
Entrained Air / Mineral Content in Ice
Symptom
Ice cubes are too large, sticking together, or difficult to harvest from the evaporator.
Excessive Ice Thickness / Harvest Timing Issue
Symptom
Ice has a bad taste or odor (plastic, chemical, or musty).
Contaminated Water Path / Odor Absorption
Symptom
Ice maker does not power on at all; no lights or display when plugged in.
No Power / Dead Unit
Symptom
Ice maker is leaking water onto the counter or floor.
External Water Leak
Symptom
Ice maker is very noisy during operation (grinding, rattling, or buzzing sounds).
Mechanical Noise / Vibration Issue
Symptom
Ice maker produces very small or hollow ice cubes.
Insufficient Water Flow to Evaporator
Symptom
Ice maker runs but produces no ice; evaporator plate does not get cold.
Refrigerant System Failure / Loss of Charge
Symptom
Ice maker runs continuously without stopping even when the bin is full of ice.
Ice Full Detection Failure
Symptom
Ice maker vibrates excessively or moves on the countertop during operation.
Excessive Vibration
Symptom
Ice melts quickly in the basket and the bin area feels warm.
Poor Ice Storage Insulation / High Ambient Heat
Symptom
Loud knocking or banging noise when ice drops into the basket.
Ice Drop Impact / Basket Position Issue
Symptom
Unit displays normal operation but ice production is very slow compared to specifications.
Reduced Cooling Efficiency
Symptom
Unit frequently cycles on and off, producing inconsistent amounts of ice.
Erratic Control / Sensor Cycling
Symptom
Unit powers on but does not start ice-making; only fans or lights operate.
Compressor or Start Circuit Failure
Symptom
Unit shows 'ADD WATER' even though the reservoir is full.
False Low Water Detection
Symptom
Unit shuts off unexpectedly during operation without any error code.
Thermal Overload or Power Interruption
Symptom
Unit trips the household circuit breaker or GFCI when starting.
Electrical Short or Ground Fault
Symptom
Water does not fill the ice-making tray or flow over the evaporator.
No Water Circulation
Symptom
Water is leaking inside the unit, pooling under the ice basket or around the evaporator.
Internal Water Overflow or Misrouting
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| ADD |
Display shows 'ADD' or 'ADD WATER'; unit beeps and stops making ice.
|
Low Water Level Detected | View Details |
| CLEAN |
Display shows 'CLEAN' or cleaning indicator light stays on; unit may still make ice but prompts for cleaning.
|
Cleaning Cycle Reminder / Scale Buildup Detection | View Details |
| E1 |
Ice maker stops and displays E1; unit may still power on but will not start ice-making cycle.
|
Ambient Temperature Sensor Fault | View Details |
| E2 |
Display shows E2 and ice production stops; fan may still run but unit will not start freezing cycle.
|
Evaporator Temperature Sensor Fault | View Details |
| E3 |
E3 error on display; ice maker may start but stops mid-cycle or fails to harvest ice.
|
Ice Full / Bin Level Sensor Fault | View Details |
| E4 |
E4 error appears and the unit stops; often associated with abnormal ice size or incomplete freezing.
|
Ice Thickness / Harvest Sensor Fault | View Details |
| E5 |
E5 error code; compressor may not start or shuts down quickly, and no ice is produced.
|
Compressor Overload / High Temperature Protection | View Details |
| E6 |
E6 error displayed; unit may power on but water does not circulate properly and ice production stops.
|
Water Pump Circuit Fault | View Details |
| E7 |
E7 error appears; unit may stop mid-cycle and not restart until power is cycled.
|
Water Level Sensor / Float Switch Fault | View Details |
| E8 |
E8 error code; unit may beep continuously and stop making ice, often associated with very low or very high ambient temperature.
|
Abnormal Ambient Temperature Protection | View Details |
| E9 |
E9 error displayed; unit may not fill with water or may overfill and trigger an alarm.
|
Water Inlet Valve / Fill System Fault | View Details |
| ICE FULL |
Display shows 'ICE FULL' or 'FULL'; unit stops making ice even though the basket may not be completely full.
|
Ice Bin Full Detection Triggered | View Details |
| – |
Buttons on the control panel do not respond or respond intermittently.
|
Control Panel / Keypad Failure | View Details |
| – |
Display is dim, flickering, or partially unreadable.
|
Display Module or Power Supply Issue | View Details |
| – |
Ice appears cloudy or white instead of clear.
|
Entrained Air / Mineral Content in Ice | View Details |
| – |
Ice cubes are too large, sticking together, or difficult to harvest from the evaporator.
|
Excessive Ice Thickness / Harvest Timing Issue | View Details |
| – |
Ice has a bad taste or odor (plastic, chemical, or musty).
|
Contaminated Water Path / Odor Absorption | View Details |
| – |
Ice maker does not power on at all; no lights or display when plugged in.
|
No Power / Dead Unit | View Details |
| – |
Ice maker is leaking water onto the counter or floor.
|
External Water Leak | View Details |
| – |
Ice maker is very noisy during operation (grinding, rattling, or buzzing sounds).
|
Mechanical Noise / Vibration Issue | View Details |
| – |
Ice maker produces very small or hollow ice cubes.
|
Insufficient Water Flow to Evaporator | View Details |
| – |
Ice maker runs but produces no ice; evaporator plate does not get cold.
|
Refrigerant System Failure / Loss of Charge | View Details |
| – |
Ice maker runs continuously without stopping even when the bin is full of ice.
|
Ice Full Detection Failure | View Details |
| – |
Ice maker vibrates excessively or moves on the countertop during operation.
|
Excessive Vibration | View Details |
| – |
Ice melts quickly in the basket and the bin area feels warm.
|
Poor Ice Storage Insulation / High Ambient Heat | View Details |
| – |
Loud knocking or banging noise when ice drops into the basket.
|
Ice Drop Impact / Basket Position Issue | View Details |
| – |
Unit displays normal operation but ice production is very slow compared to specifications.
|
Reduced Cooling Efficiency | View Details |
| – |
Unit frequently cycles on and off, producing inconsistent amounts of ice.
|
Erratic Control / Sensor Cycling | View Details |
| – |
Unit powers on but does not start ice-making; only fans or lights operate.
|
Compressor or Start Circuit Failure | View Details |
| – |
Unit shows 'ADD WATER' even though the reservoir is full.
|
False Low Water Detection | View Details |
| – |
Unit shuts off unexpectedly during operation without any error code.
|
Thermal Overload or Power Interruption | View Details |
| – |
Unit trips the household circuit breaker or GFCI when starting.
|
Electrical Short or Ground Fault | View Details |
| – |
Water does not fill the ice-making tray or flow over the evaporator.
|
No Water Circulation | View Details |
| – |
Water is leaking inside the unit, pooling under the ice basket or around the evaporator.
|
Internal Water Overflow or Misrouting | View Details |
No matching codes found
Advertisements