Caple
Caple Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Caple oven will not heat at all in any mode; display and lights work but cavity stays cold.
Main Heating Circuit Failure
E02
Caple oven heats but temperature is wildly inaccurate or overshoots and burns food.
Oven Temperature Sensor (NTC) Fault
E03
Caple oven shows an error and will not start; cooling fan does not run when heating is requested.
Cooling Fan Circuit Failure
E04
Caple oven display powers on but internal light and all heating functions are dead; sometimes accompanied by a faint click.
Main Power Relay or Supply Fault
E05
Caple oven fan runs but there is no heat in fan oven mode; grill and conventional top/bottom heat may still work.
Fan Oven Element Open Circuit
E06
Caple oven grill does not heat, but fan oven and conventional oven functions work normally.
Grill Element Failure
E07
Caple oven fan does not run in fan oven mode; oven may overheat or cook unevenly.
Convection Fan Motor Failure
E08
Caple oven display is blank or flickering; buttons may not respond, but mains power is present at the wall.
User Interface / Display Board Power Fault
E09
Caple oven clock cannot be set or loses time; oven will not start because the timer is not correctly set.
Electronic Timer / Clock Module Fault
E10
Caple oven door will not lock for pyrolytic self-cleaning cycle; cleaning program will not start.
Pyrolytic Door Lock Mechanism Fault
E11
Caple pyrolytic oven door remains locked after cleaning cycle has finished and oven has cooled.
Door Lock Release Failure
E12
Caple oven shows an over-temperature error and shuts down during use; cooling fan may run at high speed.
Overheat Protection Activation
E13
Caple oven shows a sensor error shortly after start; heating stops and error remains until power is cycled.
Shorted or Open Temperature Sensor Circuit
E14
Caple oven shows an error when using steam-assisted or moisture functions (on compatible models); steam generation stops.
Steam Generator / Humidity System Fault
E15
Caple oven interior light does not work, but all heating functions operate normally.
Oven Lamp Circuit Failure
E16
Caple oven beeps and shows an error when any key is pressed; controls may be locked.
Keypad / Touch Control Fault or Child Lock Active
E17
Caple oven trips the household circuit breaker or RCD when heating is started.
Earth Leakage or Short Circuit in Heating Circuit
E18
Caple oven shows an error related to door status; oven will not start because it thinks the door is open.
Door Switch / Door Sensor Fault
E19
Caple oven fan continues to run for an excessively long time after the oven is turned off, sometimes with an error displayed.
Cooling System Control Fault
E20
Caple oven shows a generic communication or electronics error; multiple functions fail simultaneously.
Control PCB Communication Failure
Symptom
Caple oven bottom of cavity burns food while top remains undercooked in conventional mode.
Bottom Element Overheating or Top Element Weak
Symptom
Caple oven display dims significantly when heating starts, or the oven resets mid-cycle.
Power Supply Instability
Symptom
Caple oven door does not close properly; heat escapes and front panel becomes very hot.
Door Alignment and Seal Failure
Symptom
Caple oven door glass has become cloudy or stained between the panes.
Contamination Between Door Glass Layers
Symptom
Caple oven emits a metallic clicking or pinging noise as it heats and cools.
Thermal Expansion Noise
Symptom
Caple oven emits a strong burning smell or smoke during normal cooking (not first use).
Contamination or Electrical Overheating
Symptom
Caple oven enamel interior is chipped or rusting, exposing metal underneath.
Cavity Enamel Damage
Symptom
Caple oven enamel racks and side supports are flaking or discoloured.
Rack and Support Surface Degradation
Symptom
Caple oven glass door is excessively hot to touch during use.
Door Insulation Inefficiency
Symptom
Caple oven grill element glows unevenly, with dark patches that do not heat.
Partial Grill Element Failure
Symptom
Caple oven interior light stays on permanently, even when the door is closed and oven is off.
Stuck Lamp Control or Door Switch Fault
Symptom
Caple oven knobs are stiff, hard to turn, or do not align with the selected function/temperature.
Mechanical Selector and Thermostat Knob Wear
Symptom
Caple oven makes loud rattling or grinding noises when the fan is running.
Fan Assembly Mechanical Noise
Symptom
Caple oven not heating evenly; food is burnt at the back and undercooked at the front.
Airflow and Circulation Inefficiency
Symptom
Caple oven side rails or telescopic runners do not slide smoothly; shelves stick or tilt.
Shelf Support and Runner Wear
Symptom
Caple oven steam condenses heavily on the door and drips onto the floor during cooking.
Condensation Management Issue
Symptom
Caple oven takes much longer than usual to reach set temperature.
Reduced Heating Performance
Symptom
Caple oven will not start any cooking function; display works but pressing start does nothing.
Control Interlock / Timer Not Set
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Caple oven will not heat at all in any mode; display and lights work but cavity stays cold.
|
Main Heating Circuit Failure | View Details |
| E02 |
Caple oven heats but temperature is wildly inaccurate or overshoots and burns food.
|
Oven Temperature Sensor (NTC) Fault | View Details |
| E03 |
Caple oven shows an error and will not start; cooling fan does not run when heating is requested.
|
Cooling Fan Circuit Failure | View Details |
| E04 |
Caple oven display powers on but internal light and all heating functions are dead; sometimes accompanied by a faint click.
|
Main Power Relay or Supply Fault | View Details |
| E05 |
Caple oven fan runs but there is no heat in fan oven mode; grill and conventional top/bottom heat may still work.
|
Fan Oven Element Open Circuit | View Details |
| E06 |
Caple oven grill does not heat, but fan oven and conventional oven functions work normally.
|
Grill Element Failure | View Details |
| E07 |
Caple oven fan does not run in fan oven mode; oven may overheat or cook unevenly.
|
Convection Fan Motor Failure | View Details |
| E08 |
Caple oven display is blank or flickering; buttons may not respond, but mains power is present at the wall.
|
User Interface / Display Board Power Fault | View Details |
| E09 |
Caple oven clock cannot be set or loses time; oven will not start because the timer is not correctly set.
|
Electronic Timer / Clock Module Fault | View Details |
| E10 |
Caple oven door will not lock for pyrolytic self-cleaning cycle; cleaning program will not start.
|
Pyrolytic Door Lock Mechanism Fault | View Details |
| E11 |
Caple pyrolytic oven door remains locked after cleaning cycle has finished and oven has cooled.
|
Door Lock Release Failure | View Details |
| E12 |
Caple oven shows an over-temperature error and shuts down during use; cooling fan may run at high speed.
|
Overheat Protection Activation | View Details |
| E13 |
Caple oven shows a sensor error shortly after start; heating stops and error remains until power is cycled.
|
Shorted or Open Temperature Sensor Circuit | View Details |
| E14 |
Caple oven shows an error when using steam-assisted or moisture functions (on compatible models); steam generation stops.
|
Steam Generator / Humidity System Fault | View Details |
| E15 |
Caple oven interior light does not work, but all heating functions operate normally.
|
Oven Lamp Circuit Failure | View Details |
| E16 |
Caple oven beeps and shows an error when any key is pressed; controls may be locked.
|
Keypad / Touch Control Fault or Child Lock Active | View Details |
| E17 |
Caple oven trips the household circuit breaker or RCD when heating is started.
|
Earth Leakage or Short Circuit in Heating Circuit | View Details |
| E18 |
Caple oven shows an error related to door status; oven will not start because it thinks the door is open.
|
Door Switch / Door Sensor Fault | View Details |
| E19 |
Caple oven fan continues to run for an excessively long time after the oven is turned off, sometimes with an error displayed.
|
Cooling System Control Fault | View Details |
| E20 |
Caple oven shows a generic communication or electronics error; multiple functions fail simultaneously.
|
Control PCB Communication Failure | View Details |
| – |
Caple oven bottom of cavity burns food while top remains undercooked in conventional mode.
|
Bottom Element Overheating or Top Element Weak | View Details |
| – |
Caple oven display dims significantly when heating starts, or the oven resets mid-cycle.
|
Power Supply Instability | View Details |
| – |
Caple oven door does not close properly; heat escapes and front panel becomes very hot.
|
Door Alignment and Seal Failure | View Details |
| – |
Caple oven door glass has become cloudy or stained between the panes.
|
Contamination Between Door Glass Layers | View Details |
| – |
Caple oven emits a metallic clicking or pinging noise as it heats and cools.
|
Thermal Expansion Noise | View Details |
| – |
Caple oven emits a strong burning smell or smoke during normal cooking (not first use).
|
Contamination or Electrical Overheating | View Details |
| – |
Caple oven enamel interior is chipped or rusting, exposing metal underneath.
|
Cavity Enamel Damage | View Details |
| – |
Caple oven enamel racks and side supports are flaking or discoloured.
|
Rack and Support Surface Degradation | View Details |
| – |
Caple oven glass door is excessively hot to touch during use.
|
Door Insulation Inefficiency | View Details |
| – |
Caple oven grill element glows unevenly, with dark patches that do not heat.
|
Partial Grill Element Failure | View Details |
| – |
Caple oven interior light stays on permanently, even when the door is closed and oven is off.
|
Stuck Lamp Control or Door Switch Fault | View Details |
| – |
Caple oven knobs are stiff, hard to turn, or do not align with the selected function/temperature.
|
Mechanical Selector and Thermostat Knob Wear | View Details |
| – |
Caple oven makes loud rattling or grinding noises when the fan is running.
|
Fan Assembly Mechanical Noise | View Details |
| – |
Caple oven not heating evenly; food is burnt at the back and undercooked at the front.
|
Airflow and Circulation Inefficiency | View Details |
| – |
Caple oven side rails or telescopic runners do not slide smoothly; shelves stick or tilt.
|
Shelf Support and Runner Wear | View Details |
| – |
Caple oven steam condenses heavily on the door and drips onto the floor during cooking.
|
Condensation Management Issue | View Details |
| – |
Caple oven takes much longer than usual to reach set temperature.
|
Reduced Heating Performance | View Details |
| – |
Caple oven will not start any cooking function; display works but pressing start does nothing.
|
Control Interlock / Timer Not Set | View Details |
No matching codes found
Advertisements