Miele Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
F01
Oven will not heat; display and lights work but cavity remains cold in all modes.
Heating Circuit General Fault
F02
Oven overheats; temperature far exceeds set point, food burns quickly, or safety cut-out trips.
Temperature Sensing / Regulation Fault
F03
Oven does not reach set temperature; very long preheat times or undercooked food.
Insufficient Heating / Partial Heater Failure
F04
Display shows temperature sensor fault; oven may not start or stops shortly after starting.
Oven Cavity Temperature Sensor Circuit Error
F05
Cooling fan runs at full speed constantly or does not run at all; oven may shut down with error during use.
Cooling Fan Circuit Fault
F06
Oven interior light does not turn on, or stays on permanently regardless of door position.
Oven Cavity Light / Door Switch Fault
F07
Oven display shows door-related error; oven will not start or pyrolytic cleaning is blocked.
Door Lock / Door Contact Fault
F08
Pyrolytic self-cleaning cycle will not start or aborts with an error.
Pyrolytic Cleaning System Fault
F09
Oven display or touch controls become unresponsive or reset intermittently; error logged as control electronics fault.
Electronic Control Module Fault
F10
Touch display or sensor keys do not respond, or random selections occur without user input.
Touch Control / User Interface Fault
F11
Oven shows communication error between display module and power electronics; functions may be limited or disabled.
Communication Bus Fault (UI to Main Control)
F12
Oven fan-assisted modes fail; error indicates fan or airflow problem.
Convection Fan / Airflow Fault
F13
Steam-assisted Miele oven shows error related to water system; steam functions disabled.
Steam Generator / Water Supply Fault
F14
Oven reports over-temperature or safety cut-out error; appliance may shut down and cooling fan runs for a long time.
Overheat Protection Activation
F15
Grill function does not operate or aborts with a grill-specific error.
Grill Element / Circuit Fault
F16
Clock/timer cannot be set or loses time; oven functions may be locked out.
Time Control / Real-Time Clock Fault
F17
Child lock cannot be activated or deactivated; oven remains locked or unlocked contrary to settings.
Child Lock / Safety Lock Function Fault
F18
Oven interior temperature reading is clearly incorrect (e.g., shows very high or low values) and error is displayed.
NTC Sensor Calibration / Range Fault
F19
Oven shows power supply or phase error; may not heat correctly on multi-phase installations.
Mains Supply / Phase Detection Fault
F20
Oven displays generic sensor or probe error when using a food temperature probe; probe functions disabled.
Core Temperature Probe Fault
Symptom
Condensation forms excessively on the control panel and drips down during or after cooking.
Ventilation / Condensation Management Issue
Symptom
High-pitched whining or humming noise from the oven even when not heating, often from the top area.
Cooling Fan or Transformer Noise
Symptom
Oven display is dim, unevenly lit, or segments are missing, but functions still work.
Display Backlight / Segment Failure
Symptom
Oven does not heat at all; no error code displayed, lights and fan may still work.
Complete Heating Loss Without Error
Symptom
Oven door glass becomes excessively hot to touch during normal baking.
Door Insulation / Cooling Fault
Symptom
Oven door slams shut or does not stay open at intermediate positions.
Door Hinge Spring Failure
Symptom
Oven door will not close fully; heat escapes and cooking is uneven.
Door Hinge / Alignment Fault
Symptom
Oven door will not open after a cycle; no error code displayed.
Door Lock Stuck Closed
Symptom
Oven heats but temperature is inaccurate; food undercooked or overcooked compared to set temperature, no error code.
Temperature Regulation / Calibration Issue
Symptom
Oven interior light and fan work, but elements cycle on and off very rapidly, causing poor heating.
Solid-State Relay / Triac Misfiring
Symptom
Oven light flickers or fails intermittently when the door is opened or during cooking.
Intermittent Lamp / Door Switch Contact
Symptom
Oven makes loud rattling, grinding, or squealing noises during fan-assisted modes.
Convection Fan Mechanical Wear
Symptom
Oven produces smoke and burning smell during normal cooking (not first use or self-clean).
Contamination / Grease Ignition Risk
Symptom
Oven racks or telescopic runners are difficult to slide or make scraping noises.
Rack / Runner Mechanical Wear
Symptom
Oven randomly shuts off mid-cycle without error; later can be restarted.
Intermittent Power or Overheat Cut-Out
Symptom
Oven trips the circuit breaker or RCD when heating is started.
Short Circuit / Earth Leakage Under Load
Symptom
Oven will not turn on at all; display is blank and no lights or fans operate.
No Power / Dead Appliance
Symptom
Steam-assisted oven leaks water or steam from the door area during operation.
Door Seal / Condensate Management Fault
Symptom
Strong electrical or plastic burning smell from oven, even when relatively clean.
Overheating Electrical Component
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| F01 |
Oven will not heat; display and lights work but cavity remains cold in all modes.
|
Heating Circuit General Fault | View Details |
| F02 |
Oven overheats; temperature far exceeds set point, food burns quickly, or safety cut-out trips.
|
Temperature Sensing / Regulation Fault | View Details |
| F03 |
Oven does not reach set temperature; very long preheat times or undercooked food.
|
Insufficient Heating / Partial Heater Failure | View Details |
| F04 |
Display shows temperature sensor fault; oven may not start or stops shortly after starting.
|
Oven Cavity Temperature Sensor Circuit Error | View Details |
| F05 |
Cooling fan runs at full speed constantly or does not run at all; oven may shut down with error during use.
|
Cooling Fan Circuit Fault | View Details |
| F06 |
Oven interior light does not turn on, or stays on permanently regardless of door position.
|
Oven Cavity Light / Door Switch Fault | View Details |
| F07 |
Oven display shows door-related error; oven will not start or pyrolytic cleaning is blocked.
|
Door Lock / Door Contact Fault | View Details |
| F08 |
Pyrolytic self-cleaning cycle will not start or aborts with an error.
|
Pyrolytic Cleaning System Fault | View Details |
| F09 |
Oven display or touch controls become unresponsive or reset intermittently; error logged as control electronics fault.
|
Electronic Control Module Fault | View Details |
| F10 |
Touch display or sensor keys do not respond, or random selections occur without user input.
|
Touch Control / User Interface Fault | View Details |
| F11 |
Oven shows communication error between display module and power electronics; functions may be limited or disabled.
|
Communication Bus Fault (UI to Main Control) | View Details |
| F12 |
Oven fan-assisted modes fail; error indicates fan or airflow problem.
|
Convection Fan / Airflow Fault | View Details |
| F13 |
Steam-assisted Miele oven shows error related to water system; steam functions disabled.
|
Steam Generator / Water Supply Fault | View Details |
| F14 |
Oven reports over-temperature or safety cut-out error; appliance may shut down and cooling fan runs for a long time.
|
Overheat Protection Activation | View Details |
| F15 |
Grill function does not operate or aborts with a grill-specific error.
|
Grill Element / Circuit Fault | View Details |
| F16 |
Clock/timer cannot be set or loses time; oven functions may be locked out.
|
Time Control / Real-Time Clock Fault | View Details |
| F17 |
Child lock cannot be activated or deactivated; oven remains locked or unlocked contrary to settings.
|
Child Lock / Safety Lock Function Fault | View Details |
| F18 |
Oven interior temperature reading is clearly incorrect (e.g., shows very high or low values) and error is displayed.
|
NTC Sensor Calibration / Range Fault | View Details |
| F19 |
Oven shows power supply or phase error; may not heat correctly on multi-phase installations.
|
Mains Supply / Phase Detection Fault | View Details |
| F20 |
Oven displays generic sensor or probe error when using a food temperature probe; probe functions disabled.
|
Core Temperature Probe Fault | View Details |
| – |
Condensation forms excessively on the control panel and drips down during or after cooking.
|
Ventilation / Condensation Management Issue | View Details |
| – |
High-pitched whining or humming noise from the oven even when not heating, often from the top area.
|
Cooling Fan or Transformer Noise | View Details |
| – |
Oven display is dim, unevenly lit, or segments are missing, but functions still work.
|
Display Backlight / Segment Failure | View Details |
| – |
Oven does not heat at all; no error code displayed, lights and fan may still work.
|
Complete Heating Loss Without Error | View Details |
| – |
Oven door glass becomes excessively hot to touch during normal baking.
|
Door Insulation / Cooling Fault | View Details |
| – |
Oven door slams shut or does not stay open at intermediate positions.
|
Door Hinge Spring Failure | View Details |
| – |
Oven door will not close fully; heat escapes and cooking is uneven.
|
Door Hinge / Alignment Fault | View Details |
| – |
Oven door will not open after a cycle; no error code displayed.
|
Door Lock Stuck Closed | View Details |
| – |
Oven heats but temperature is inaccurate; food undercooked or overcooked compared to set temperature, no error code.
|
Temperature Regulation / Calibration Issue | View Details |
| – |
Oven interior light and fan work, but elements cycle on and off very rapidly, causing poor heating.
|
Solid-State Relay / Triac Misfiring | View Details |
| – |
Oven light flickers or fails intermittently when the door is opened or during cooking.
|
Intermittent Lamp / Door Switch Contact | View Details |
| – |
Oven makes loud rattling, grinding, or squealing noises during fan-assisted modes.
|
Convection Fan Mechanical Wear | View Details |
| – |
Oven produces smoke and burning smell during normal cooking (not first use or self-clean).
|
Contamination / Grease Ignition Risk | View Details |
| – |
Oven racks or telescopic runners are difficult to slide or make scraping noises.
|
Rack / Runner Mechanical Wear | View Details |
| – |
Oven randomly shuts off mid-cycle without error; later can be restarted.
|
Intermittent Power or Overheat Cut-Out | View Details |
| – |
Oven trips the circuit breaker or RCD when heating is started.
|
Short Circuit / Earth Leakage Under Load | View Details |
| – |
Oven will not turn on at all; display is blank and no lights or fans operate.
|
No Power / Dead Appliance | View Details |
| – |
Steam-assisted oven leaks water or steam from the door area during operation.
|
Door Seal / Condensate Management Fault | View Details |
| – |
Strong electrical or plastic burning smell from oven, even when relatively clean.
|
Overheating Electrical Component | View Details |
No matching codes found
Advertisements