Calphalon
Calphalon Coffee Makers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Display shows E01 and brewing will not start or stops immediately after pressing the brew button.
Water Reservoir Presence/Position Error
E02
Display shows E02 and the coffee maker will not heat or brew.
Thermal Sensor / Thermistor Fault
E03
Display shows E03 and brewing stops partway through the cycle or never starts flowing.
Flow Meter / Water Flow Detection Error
E04
Display shows E04 and the coffee maker shuts down or never heats the water.
Heating Element / Thermal Block Failure
E05
Display shows E05 and the brew cycle will not start or stops with beeping.
Brew Basket / Carafe Position Sensor Error
E06
Display shows E06 and the unit beeps repeatedly, often during or after a brew cycle.
Overfill / Overflow Detection Error
E07
Display shows E07 and the grinder will not run on a Calphalon grind-and-brew coffee maker.
Grinder Motor / Grinder Jam Error
E08
Display shows E08 and the pump is very loud or does not move water.
Pump / Priming Error
E09
Display shows E09 and the clock and controls are unresponsive or reset frequently.
Control Board / Low Voltage Error
E10
Display shows E10 and the warming plate does not heat after brewing.
Warming Plate / Hot Plate Circuit Error
Symptom
Brew basket drips coffee onto the warming plate even when the carafe is removed.
Drip-Stop Valve Failure
Symptom
Brewed coffee is not hot enough, even immediately after brewing.
Low Brew Temperature
Symptom
Built-in grinder is extremely loud, squeals, or grinds unevenly.
Grinder Burr Wear or Misalignment
Symptom
Built-in grinder runs but no ground coffee reaches the brew basket.
Grinder Chute Blockage
Symptom
Carafe does not fill to the selected cup level; brew volume is consistently low.
Underfill / Volume Inaccuracy
Symptom
Carafe overfills beyond the selected cup level, risking overflow.
Overfill / Volume Control Failure
Symptom
Clock or timer loses time or resets frequently.
Clock / Memory Retention Failure
Symptom
Coffee maker brews extremely slowly; a full pot takes much longer than normal.
Restricted Water Flow from Scale Buildup
Symptom
Coffee maker emits a burning smell during brewing or while the warming plate is on.
Overheating / Residue Burning
Symptom
Coffee maker leaks water from the bottom of the unit during or after brewing.
Internal Leak / Hose or Seal Failure
Symptom
Coffee maker makes loud gurgling or rattling noises during brewing.
Air in System / Pump Cavitation
Symptom
Coffee maker powers on but will not start brewing when the brew button is pressed.
Brew Start / Control Logic Failure
Symptom
Coffee maker produces excessive steam from the top lid or sides during brewing.
Steam Venting / Lid Seal Issue
Symptom
Coffee maker turns off mid-brew or randomly shuts down during operation.
Intermittent Power Loss / Thermal Cutout
Symptom
Coffee maker vibrates excessively or moves on the counter during brewing.
Excessive Vibration / Pump Mount Issue
Symptom
Coffee maker will not power on at all; display is blank and no lights or sounds occur.
No Power / Dead Unit
Symptom
Coffee overflows from the brew basket, spilling grounds and liquid into the filter area and sometimes onto the counter.
Brew Basket Overflow
Symptom
Coffee tastes bitter or burnt.
Over-Extraction / Overheating
Symptom
Coffee tastes weak or watery even when using normal amounts of coffee.
Under-Extraction / Short Brew Time
Symptom
Display or control panel buttons do not respond or respond intermittently.
Unresponsive Touch Panel / Keypad
Symptom
Display shows a descaling or clean indicator and it will not clear after cleaning.
Descale Indicator Stuck
Symptom
Strong plastic or chemical odor from a new Calphalon coffee maker during first uses.
New Appliance Off-Gassing / Residue
Symptom
Top lid does not close or latch properly, preventing brewing.
Lid Latch / Hinge Misalignment
Symptom
Visible mold or mildew inside the water reservoir or internal passages (musty smell).
Microbial Growth / Sanitation Issue
Symptom
Warming plate does not keep coffee hot or turns off too soon.
Insufficient Keep-Warm Function
Symptom
Water leaks from around the water reservoir area onto the counter.
Reservoir Seal / Valve Leak
Symptom
Water remains in the reservoir and does not decrease during a brew cycle; no water is drawn.
No Water Intake
Symptom
Water reservoir is difficult to remove or install; it sticks or does not seat fully.
Reservoir Alignment / Guide Wear
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Display shows E01 and brewing will not start or stops immediately after pressing the brew button.
|
Water Reservoir Presence/Position Error | View Details |
| E02 |
Display shows E02 and the coffee maker will not heat or brew.
|
Thermal Sensor / Thermistor Fault | View Details |
| E03 |
Display shows E03 and brewing stops partway through the cycle or never starts flowing.
|
Flow Meter / Water Flow Detection Error | View Details |
| E04 |
Display shows E04 and the coffee maker shuts down or never heats the water.
|
Heating Element / Thermal Block Failure | View Details |
| E05 |
Display shows E05 and the brew cycle will not start or stops with beeping.
|
Brew Basket / Carafe Position Sensor Error | View Details |
| E06 |
Display shows E06 and the unit beeps repeatedly, often during or after a brew cycle.
|
Overfill / Overflow Detection Error | View Details |
| E07 |
Display shows E07 and the grinder will not run on a Calphalon grind-and-brew coffee maker.
|
Grinder Motor / Grinder Jam Error | View Details |
| E08 |
Display shows E08 and the pump is very loud or does not move water.
|
Pump / Priming Error | View Details |
| E09 |
Display shows E09 and the clock and controls are unresponsive or reset frequently.
|
Control Board / Low Voltage Error | View Details |
| E10 |
Display shows E10 and the warming plate does not heat after brewing.
|
Warming Plate / Hot Plate Circuit Error | View Details |
| – |
Brew basket drips coffee onto the warming plate even when the carafe is removed.
|
Drip-Stop Valve Failure | View Details |
| – |
Brewed coffee is not hot enough, even immediately after brewing.
|
Low Brew Temperature | View Details |
| – |
Built-in grinder is extremely loud, squeals, or grinds unevenly.
|
Grinder Burr Wear or Misalignment | View Details |
| – |
Built-in grinder runs but no ground coffee reaches the brew basket.
|
Grinder Chute Blockage | View Details |
| – |
Carafe does not fill to the selected cup level; brew volume is consistently low.
|
Underfill / Volume Inaccuracy | View Details |
| – |
Carafe overfills beyond the selected cup level, risking overflow.
|
Overfill / Volume Control Failure | View Details |
| – |
Clock or timer loses time or resets frequently.
|
Clock / Memory Retention Failure | View Details |
| – |
Coffee maker brews extremely slowly; a full pot takes much longer than normal.
|
Restricted Water Flow from Scale Buildup | View Details |
| – |
Coffee maker emits a burning smell during brewing or while the warming plate is on.
|
Overheating / Residue Burning | View Details |
| – |
Coffee maker leaks water from the bottom of the unit during or after brewing.
|
Internal Leak / Hose or Seal Failure | View Details |
| – |
Coffee maker makes loud gurgling or rattling noises during brewing.
|
Air in System / Pump Cavitation | View Details |
| – |
Coffee maker powers on but will not start brewing when the brew button is pressed.
|
Brew Start / Control Logic Failure | View Details |
| – |
Coffee maker produces excessive steam from the top lid or sides during brewing.
|
Steam Venting / Lid Seal Issue | View Details |
| – |
Coffee maker turns off mid-brew or randomly shuts down during operation.
|
Intermittent Power Loss / Thermal Cutout | View Details |
| – |
Coffee maker vibrates excessively or moves on the counter during brewing.
|
Excessive Vibration / Pump Mount Issue | View Details |
| – |
Coffee maker will not power on at all; display is blank and no lights or sounds occur.
|
No Power / Dead Unit | View Details |
| – |
Coffee overflows from the brew basket, spilling grounds and liquid into the filter area and sometimes onto the counter.
|
Brew Basket Overflow | View Details |
| – |
Coffee tastes bitter or burnt.
|
Over-Extraction / Overheating | View Details |
| – |
Coffee tastes weak or watery even when using normal amounts of coffee.
|
Under-Extraction / Short Brew Time | View Details |
| – |
Display or control panel buttons do not respond or respond intermittently.
|
Unresponsive Touch Panel / Keypad | View Details |
| – |
Display shows a descaling or clean indicator and it will not clear after cleaning.
|
Descale Indicator Stuck | View Details |
| – |
Strong plastic or chemical odor from a new Calphalon coffee maker during first uses.
|
New Appliance Off-Gassing / Residue | View Details |
| – |
Top lid does not close or latch properly, preventing brewing.
|
Lid Latch / Hinge Misalignment | View Details |
| – |
Visible mold or mildew inside the water reservoir or internal passages (musty smell).
|
Microbial Growth / Sanitation Issue | View Details |
| – |
Warming plate does not keep coffee hot or turns off too soon.
|
Insufficient Keep-Warm Function | View Details |
| – |
Water leaks from around the water reservoir area onto the counter.
|
Reservoir Seal / Valve Leak | View Details |
| – |
Water remains in the reservoir and does not decrease during a brew cycle; no water is drawn.
|
No Water Intake | View Details |
| – |
Water reservoir is difficult to remove or install; it sticks or does not seat fully.
|
Reservoir Alignment / Guide Wear | View Details |
No matching codes found
Advertisements