Hisense Dishwashers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Dishwasher will not fill with water, cycle stops shortly after start and displays E1.
Water Inlet Timeout / No Fill
E10
Dishwasher shows E10 and may not start or may stop unexpectedly.
Door Lock / Door Switch Error
E11
Dishwasher displays E11 and may not respond to button presses or may behave erratically.
Communication Error Between Control Board and User Interface
E12
Dishwasher shows E12 and may have issues with drying or fan operation.
Drying Fan / Ventilation Error
E13
Dishwasher displays E13 and may stop with water in the tub or show inconsistent water levels.
Flow Meter / Water Intake Sensor Error
E14
Dishwasher shows E14 and may not start or may stop shortly after pressing Start.
Button / Key Input Error
E15
Dishwasher displays E15 and will not start; often associated with water in the base tray.
Base Leak Detected / Float Switch Active
E16
Dishwasher shows E16 and may continuously fill or drain, or fail to start a normal cycle.
Inlet Valve / Water Overflow Error
E17
Dishwasher displays E17 and may not fill correctly, often indicating low water pressure or slow fill.
Low Water Pressure / Slow Fill Error
E18
Dishwasher shows E18 and may stop with very little water in the tub.
Underfill / Insufficient Water Level
E19
Dishwasher displays E19 and may not start or may stop mid-cycle without obvious mechanical issues.
EEPROM / Control Board Configuration Error
E2
Dishwasher does not drain, water remains in the bottom of the tub and E2 is displayed.
Drain Timeout / Drain Failure
E20
Dishwasher shows E20 and may have erratic operation of internal valves or diverter.
Auxiliary Valve / Diverter Control Error
E3
Dishwasher runs but dishes are cold and not drying, cycle may end early with E3 displayed.
Heating Circuit Failure
E4
Dishwasher stops mid-cycle and displays E4, often with water left in the tub or poor wash performance.
Water Level / Overflow Sensor Error
E5
Dishwasher displays E5 and stops, often shortly after starting the wash cycle.
Circulation Pump Failure
E6
Dishwasher shows E6 and may stop shortly after filling, sometimes with no spray action.
Water Turbidity / Optical Sensor Error
E7
Dishwasher displays E7 and may not complete the cycle; sometimes associated with incorrect water temperature.
NTC Temperature Sensor Fault
E8
Dishwasher shows E8 and may have poor wash performance or unusual water levels.
Water Distribution / Diverter Valve Error
E9
Dishwasher displays E9 and may stop with water remaining in the tub or with unusual noises from the base.
Leakage / Anti-Flood Protection Activated
Symptom
Dishwasher displays lights but buttons do not respond or respond intermittently.
Unresponsive Control Panel
Symptom
Dishwasher does not drain completely; a pool of dirty water remains at the bottom after the cycle.
Partial Drain / Standing Water
Symptom
Dishwasher does not power on at all, no lights or display, no response to buttons.
No Power / Dead Appliance
Symptom
Dishwasher door drops down quickly or will not stay in the partially open position.
Door Spring / Hinge Cable Failure
Symptom
Dishwasher emits a bad smell, musty or rotten odor when opened.
Odor / Biofilm Build-Up
Symptom
Dishwasher emits a burning smell during operation.
Overheating Component / Electrical Overheat
Symptom
Dishwasher interior shows rust spots or tub corrosion.
Tub / Rack Corrosion
Symptom
Dishwasher is very noisy during operation, with grinding, rattling, or humming sounds.
Excessive Operating Noise
Symptom
Dishwasher leaks water from the front door area onto the floor.
Door Seal / Splash Leak
Symptom
Dishwasher leaks water from underneath, with puddles appearing under the cabinet.
Base Leak / Hose or Sump Failure
Symptom
Dishwasher leaves detergent tablet partially dissolved or still in the dispenser at end of cycle.
Detergent Dispenser Not Opening / Poor Dissolution
Symptom
Dishwasher leaves dishes wet at the end of the cycle, with poor drying performance.
Poor Drying
Symptom
Dishwasher leaves white film or cloudy residue on glasses and dishes.
Limescale / Detergent Residue
Symptom
Dishwasher powers on but will not start cycle when Start is pressed; may beep or flash but does nothing.
Start Inhibit / Door or Program Not Accepted
Symptom
Dishwasher racks are difficult to slide, or upper rack keeps falling or tilting.
Rack Rail / Roller Wear
Symptom
Dishwasher runs but dishes come out dirty, with food particles stuck on plates and glasses.
Poor Wash Performance
Symptom
Dishwasher runs for a very long time or never seems to finish the cycle.
Extended Cycle Duration
Symptom
Dishwasher trips the circuit breaker during or shortly after starting a cycle.
Electrical Short / Overcurrent
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Dishwasher will not fill with water, cycle stops shortly after start and displays E1.
|
Water Inlet Timeout / No Fill | View Details |
| E10 |
Dishwasher shows E10 and may not start or may stop unexpectedly.
|
Door Lock / Door Switch Error | View Details |
| E11 |
Dishwasher displays E11 and may not respond to button presses or may behave erratically.
|
Communication Error Between Control Board and User Interface | View Details |
| E12 |
Dishwasher shows E12 and may have issues with drying or fan operation.
|
Drying Fan / Ventilation Error | View Details |
| E13 |
Dishwasher displays E13 and may stop with water in the tub or show inconsistent water levels.
|
Flow Meter / Water Intake Sensor Error | View Details |
| E14 |
Dishwasher shows E14 and may not start or may stop shortly after pressing Start.
|
Button / Key Input Error | View Details |
| E15 |
Dishwasher displays E15 and will not start; often associated with water in the base tray.
|
Base Leak Detected / Float Switch Active | View Details |
| E16 |
Dishwasher shows E16 and may continuously fill or drain, or fail to start a normal cycle.
|
Inlet Valve / Water Overflow Error | View Details |
| E17 |
Dishwasher displays E17 and may not fill correctly, often indicating low water pressure or slow fill.
|
Low Water Pressure / Slow Fill Error | View Details |
| E18 |
Dishwasher shows E18 and may stop with very little water in the tub.
|
Underfill / Insufficient Water Level | View Details |
| E19 |
Dishwasher displays E19 and may not start or may stop mid-cycle without obvious mechanical issues.
|
EEPROM / Control Board Configuration Error | View Details |
| E2 |
Dishwasher does not drain, water remains in the bottom of the tub and E2 is displayed.
|
Drain Timeout / Drain Failure | View Details |
| E20 |
Dishwasher shows E20 and may have erratic operation of internal valves or diverter.
|
Auxiliary Valve / Diverter Control Error | View Details |
| E3 |
Dishwasher runs but dishes are cold and not drying, cycle may end early with E3 displayed.
|
Heating Circuit Failure | View Details |
| E4 |
Dishwasher stops mid-cycle and displays E4, often with water left in the tub or poor wash performance.
|
Water Level / Overflow Sensor Error | View Details |
| E5 |
Dishwasher displays E5 and stops, often shortly after starting the wash cycle.
|
Circulation Pump Failure | View Details |
| E6 |
Dishwasher shows E6 and may stop shortly after filling, sometimes with no spray action.
|
Water Turbidity / Optical Sensor Error | View Details |
| E7 |
Dishwasher displays E7 and may not complete the cycle; sometimes associated with incorrect water temperature.
|
NTC Temperature Sensor Fault | View Details |
| E8 |
Dishwasher shows E8 and may have poor wash performance or unusual water levels.
|
Water Distribution / Diverter Valve Error | View Details |
| E9 |
Dishwasher displays E9 and may stop with water remaining in the tub or with unusual noises from the base.
|
Leakage / Anti-Flood Protection Activated | View Details |
| – |
Dishwasher displays lights but buttons do not respond or respond intermittently.
|
Unresponsive Control Panel | View Details |
| – |
Dishwasher does not drain completely; a pool of dirty water remains at the bottom after the cycle.
|
Partial Drain / Standing Water | View Details |
| – |
Dishwasher does not power on at all, no lights or display, no response to buttons.
|
No Power / Dead Appliance | View Details |
| – |
Dishwasher door drops down quickly or will not stay in the partially open position.
|
Door Spring / Hinge Cable Failure | View Details |
| – |
Dishwasher emits a bad smell, musty or rotten odor when opened.
|
Odor / Biofilm Build-Up | View Details |
| – |
Dishwasher emits a burning smell during operation.
|
Overheating Component / Electrical Overheat | View Details |
| – |
Dishwasher interior shows rust spots or tub corrosion.
|
Tub / Rack Corrosion | View Details |
| – |
Dishwasher is very noisy during operation, with grinding, rattling, or humming sounds.
|
Excessive Operating Noise | View Details |
| – |
Dishwasher leaks water from the front door area onto the floor.
|
Door Seal / Splash Leak | View Details |
| – |
Dishwasher leaks water from underneath, with puddles appearing under the cabinet.
|
Base Leak / Hose or Sump Failure | View Details |
| – |
Dishwasher leaves detergent tablet partially dissolved or still in the dispenser at end of cycle.
|
Detergent Dispenser Not Opening / Poor Dissolution | View Details |
| – |
Dishwasher leaves dishes wet at the end of the cycle, with poor drying performance.
|
Poor Drying | View Details |
| – |
Dishwasher leaves white film or cloudy residue on glasses and dishes.
|
Limescale / Detergent Residue | View Details |
| – |
Dishwasher powers on but will not start cycle when Start is pressed; may beep or flash but does nothing.
|
Start Inhibit / Door or Program Not Accepted | View Details |
| – |
Dishwasher racks are difficult to slide, or upper rack keeps falling or tilting.
|
Rack Rail / Roller Wear | View Details |
| – |
Dishwasher runs but dishes come out dirty, with food particles stuck on plates and glasses.
|
Poor Wash Performance | View Details |
| – |
Dishwasher runs for a very long time or never seems to finish the cycle.
|
Extended Cycle Duration | View Details |
| – |
Dishwasher trips the circuit breaker during or shortly after starting a cycle.
|
Electrical Short / Overcurrent | View Details |
No matching codes found
Advertisements