Samsung Washer-Dryer Combos Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
1E
Washer-dryer combo will not start a cycle and displays 1E on the panel.
Water Level Sensor (Pressure Switch) Error
3E
Washer-dryer combo attempts to spin but stops and displays 3E. Drum may jerk or not move at all.
Motor Drive Error / Hall Sensor Fault
3E1
Washer-dryer combo shows 3E1 during spin ramp-up and fails to reach full speed.
Motor Hall Sensor Signal Error
3E2
Washer-dryer combo displays 3E2 and may not start the motor at all.
Motor Drive Communication Error
4C
Washer-dryer combo stops at the beginning of the cycle with 4C displayed and no water entering.
Water Supply Error (Alternate Code)
4E
Washer-dryer combo does not fill with water and displays 4E (or 4C on some models).
Water Supply Error
5C
Washer-dryer combo stops mid-cycle with water in the drum and shows 5C on the display.
Drain Error (Alternate Code)
5E
Washer-dryer combo will not drain and displays 5E (or 5C on some models). Water remains in the drum.
Drain Error
8E
Washer-dryer combo displays 8E and may vibrate abnormally or fail to spin properly.
Vibration Sensor Error
AE
Washer-dryer combo displays AE and may not respond to button presses.
Communication Error Between Main PCB and Sub PCB
CE
Washer-dryer combo displays CE and may stop during operation, sometimes with a burning smell.
Current Error / Overcurrent to Motor
dC
Washer-dryer combo intermittently stops before spin and shows dC, often accompanied by beeping.
Door Lock / Unbalance Detection Error
DC
Washer-dryer combo will not spin and shows DC or dC on the display. Door may unlock and relock repeatedly.
Unbalanced Load / Door Check Error
dE
Washer-dryer combo beeps and shows dE shortly after starting, with the door symbol flashing.
Door Not Locked / Door Switch Error
DE
Washer-dryer combo will not start or stops mid-cycle with DE or dE displayed. Door will not lock properly.
Door Lock Error
dF
Washer-dryer combo displays dF and the door may not lock or unlock correctly.
Door Lock Failure
HE
Washer-dryer combo stops heating water or drying and displays HE or HE1/HE2 depending on model.
Water Heater / Dry Heater Error
HE1
Washer-dryer combo shows HE1 and fails to heat water during wash cycles.
Wash Heater Overheating / Heater Circuit Error
HE2
Washer-dryer combo shows HE2 and drying function does not work or stops quickly.
Dry Heater Error / Overheating
LE
Washer-dryer combo shows LE or LE1 and may stop mid-cycle with water still in the drum.
Water Leak / Low Water Level Error
LE1
Washer-dryer combo displays LE1 and stops operation, often with water in the base pan.
Leakage Error (Float Switch Activated)
ND
Washer-dryer combo shows ND and will not drain water from the drum.
No Drain Error
NF
Washer-dryer combo shows NF and does not fill with water.
No Fill Error
OE
Washer-dryer combo overfills or shows OE/OF while water continues to enter or remains too high in the drum.
Overflow / Overfill Error
OE1
Washer-dryer combo displays OE1 and may stop mid-cycle with abnormal water level behavior.
Overflow Sensor / Pressure System Fault
PF
Washer-dryer combo displays PF and cycle stops unexpectedly, often after a power interruption.
Power Failure Detected
SUD
Washer-dryer combo displays SUD or SUdS and may pause while attempting to clear excess suds.
Excess Suds Detected
tE
Washer-dryer combo displays tE or tE1/tE2 and may stop heating or abort the cycle.
Temperature Sensor (NTC) Error
tE1
Washer-dryer combo shows tE1 and fails to heat water properly.
Wash NTC Sensor Error
tE2
Washer-dryer combo shows tE2 and drying performance is affected or dryer will not start.
Dry NTC Sensor Error
UC
Washer-dryer combo displays UC and may pause or stop unexpectedly during operation.
Voltage Fluctuation Error
UE
Washer-dryer combo stops during spin and displays UE. Drum may attempt to spin but stops repeatedly.
Unbalanced Load Error
Symptom
Washer-dryer combo door will not open at the end of the cycle, even though the drum has stopped.
Door Stuck Locked
Symptom
Washer-dryer combo drum does not turn at all during wash or spin, but the unit powers on.
No Drum Movement
Symptom
Washer-dryer combo emits a burning rubber or electrical smell during operation.
Overheating Component or Friction
Symptom
Washer-dryer combo has a persistent musty or moldy odor inside the drum.
Biofilm and Mold Buildup
Symptom
Washer-dryer combo leaks water from the front door area during wash cycles.
Door Boot (Gasket) Leak
Symptom
Washer-dryer combo leaks water from the rear or bottom during wash or drain.
Internal Hose or Pump Leak
Symptom
Washer-dryer combo leaves clothes very wet at the end of the cycle, even though it appears to spin.
Poor Spin Extraction
Symptom
Washer-dryer combo leaves visible detergent or softener residue on clothes after washing.
Poor Rinsing / Dispenser Issue
Symptom
Washer-dryer combo makes loud banging or knocking noises during spin.
Excessive Vibration / Suspension Wear
Symptom
Washer-dryer combo powers on but buttons do not respond or respond intermittently.
User Interface / Control Panel Fault
Symptom
Washer-dryer combo produces a high-pitched squealing or grinding noise during spin.
Drum Bearing or Drive System Wear
Symptom
Washer-dryer combo takes excessively long to dry clothes or leaves them damp.
Poor Drying Performance
Symptom
Washer-dryer combo will not start at all; display is blank and unresponsive.
No Power / Dead Unit
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| 1E |
Washer-dryer combo will not start a cycle and displays 1E on the panel.
|
Water Level Sensor (Pressure Switch) Error | View Details |
| 3E |
Washer-dryer combo attempts to spin but stops and displays 3E. Drum may jerk or not move at all.
|
Motor Drive Error / Hall Sensor Fault | View Details |
| 3E1 |
Washer-dryer combo shows 3E1 during spin ramp-up and fails to reach full speed.
|
Motor Hall Sensor Signal Error | View Details |
| 3E2 |
Washer-dryer combo displays 3E2 and may not start the motor at all.
|
Motor Drive Communication Error | View Details |
| 4C |
Washer-dryer combo stops at the beginning of the cycle with 4C displayed and no water entering.
|
Water Supply Error (Alternate Code) | View Details |
| 4E |
Washer-dryer combo does not fill with water and displays 4E (or 4C on some models).
|
Water Supply Error | View Details |
| 5C |
Washer-dryer combo stops mid-cycle with water in the drum and shows 5C on the display.
|
Drain Error (Alternate Code) | View Details |
| 5E |
Washer-dryer combo will not drain and displays 5E (or 5C on some models). Water remains in the drum.
|
Drain Error | View Details |
| 8E |
Washer-dryer combo displays 8E and may vibrate abnormally or fail to spin properly.
|
Vibration Sensor Error | View Details |
| AE |
Washer-dryer combo displays AE and may not respond to button presses.
|
Communication Error Between Main PCB and Sub PCB | View Details |
| CE |
Washer-dryer combo displays CE and may stop during operation, sometimes with a burning smell.
|
Current Error / Overcurrent to Motor | View Details |
| dC |
Washer-dryer combo intermittently stops before spin and shows dC, often accompanied by beeping.
|
Door Lock / Unbalance Detection Error | View Details |
| DC |
Washer-dryer combo will not spin and shows DC or dC on the display. Door may unlock and relock repeatedly.
|
Unbalanced Load / Door Check Error | View Details |
| dE |
Washer-dryer combo beeps and shows dE shortly after starting, with the door symbol flashing.
|
Door Not Locked / Door Switch Error | View Details |
| DE |
Washer-dryer combo will not start or stops mid-cycle with DE or dE displayed. Door will not lock properly.
|
Door Lock Error | View Details |
| dF |
Washer-dryer combo displays dF and the door may not lock or unlock correctly.
|
Door Lock Failure | View Details |
| HE |
Washer-dryer combo stops heating water or drying and displays HE or HE1/HE2 depending on model.
|
Water Heater / Dry Heater Error | View Details |
| HE1 |
Washer-dryer combo shows HE1 and fails to heat water during wash cycles.
|
Wash Heater Overheating / Heater Circuit Error | View Details |
| HE2 |
Washer-dryer combo shows HE2 and drying function does not work or stops quickly.
|
Dry Heater Error / Overheating | View Details |
| LE |
Washer-dryer combo shows LE or LE1 and may stop mid-cycle with water still in the drum.
|
Water Leak / Low Water Level Error | View Details |
| LE1 |
Washer-dryer combo displays LE1 and stops operation, often with water in the base pan.
|
Leakage Error (Float Switch Activated) | View Details |
| ND |
Washer-dryer combo shows ND and will not drain water from the drum.
|
No Drain Error | View Details |
| NF |
Washer-dryer combo shows NF and does not fill with water.
|
No Fill Error | View Details |
| OE |
Washer-dryer combo overfills or shows OE/OF while water continues to enter or remains too high in the drum.
|
Overflow / Overfill Error | View Details |
| OE1 |
Washer-dryer combo displays OE1 and may stop mid-cycle with abnormal water level behavior.
|
Overflow Sensor / Pressure System Fault | View Details |
| PF |
Washer-dryer combo displays PF and cycle stops unexpectedly, often after a power interruption.
|
Power Failure Detected | View Details |
| SUD |
Washer-dryer combo displays SUD or SUdS and may pause while attempting to clear excess suds.
|
Excess Suds Detected | View Details |
| tE |
Washer-dryer combo displays tE or tE1/tE2 and may stop heating or abort the cycle.
|
Temperature Sensor (NTC) Error | View Details |
| tE1 |
Washer-dryer combo shows tE1 and fails to heat water properly.
|
Wash NTC Sensor Error | View Details |
| tE2 |
Washer-dryer combo shows tE2 and drying performance is affected or dryer will not start.
|
Dry NTC Sensor Error | View Details |
| UC |
Washer-dryer combo displays UC and may pause or stop unexpectedly during operation.
|
Voltage Fluctuation Error | View Details |
| UE |
Washer-dryer combo stops during spin and displays UE. Drum may attempt to spin but stops repeatedly.
|
Unbalanced Load Error | View Details |
| – |
Washer-dryer combo door will not open at the end of the cycle, even though the drum has stopped.
|
Door Stuck Locked | View Details |
| – |
Washer-dryer combo drum does not turn at all during wash or spin, but the unit powers on.
|
No Drum Movement | View Details |
| – |
Washer-dryer combo emits a burning rubber or electrical smell during operation.
|
Overheating Component or Friction | View Details |
| – |
Washer-dryer combo has a persistent musty or moldy odor inside the drum.
|
Biofilm and Mold Buildup | View Details |
| – |
Washer-dryer combo leaks water from the front door area during wash cycles.
|
Door Boot (Gasket) Leak | View Details |
| – |
Washer-dryer combo leaks water from the rear or bottom during wash or drain.
|
Internal Hose or Pump Leak | View Details |
| – |
Washer-dryer combo leaves clothes very wet at the end of the cycle, even though it appears to spin.
|
Poor Spin Extraction | View Details |
| – |
Washer-dryer combo leaves visible detergent or softener residue on clothes after washing.
|
Poor Rinsing / Dispenser Issue | View Details |
| – |
Washer-dryer combo makes loud banging or knocking noises during spin.
|
Excessive Vibration / Suspension Wear | View Details |
| – |
Washer-dryer combo powers on but buttons do not respond or respond intermittently.
|
User Interface / Control Panel Fault | View Details |
| – |
Washer-dryer combo produces a high-pitched squealing or grinding noise during spin.
|
Drum Bearing or Drive System Wear | View Details |
| – |
Washer-dryer combo takes excessively long to dry clothes or leaves them damp.
|
Poor Drying Performance | View Details |
| – |
Washer-dryer combo will not start at all; display is blank and unresponsive.
|
No Power / Dead Unit | View Details |
No matching codes found
Advertisements