Wexiodisk Dishwashers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Machine will not start cycle, display shows E01 immediately after power-on or when Start is pressed.
Main Water Inlet Fault
E02
Dishwasher does not fill with water, cycle aborts shortly after start and E02 is displayed.
Insufficient Water Level / Fill Timeout
E03
Machine does not drain, water remains in tank or sump and E03 is shown on the display.
Drain Pump or Drainage Fault
E04
Dishwasher stops mid-cycle, water is not heating and E04 appears on the display.
Wash Tank Heating Fault
E05
Rinse water does not reach target temperature, dishes are not hot at end of cycle and E05 is displayed.
Booster / Rinse Tank Heating Fault
E06
Machine stops and displays E06, often accompanied by unusually high water level in the tank or water leaking into the wash chamber when idle.
Water Level / Overflow Fault
E07
Display shows E07 and the machine may stop shortly after starting the wash phase; wash pump may not run or may cut out.
Wash Pump Motor Fault
E08
Machine displays E08 and may not start; door or hood appears closed but cycle will not run.
Door / Hood Interlock Fault
E09
E09 appears and the machine may stop during rinse; rinse pump may not operate or runs intermittently.
Rinse Pump Fault
E10
Display shows E10 and detergent is not being dosed correctly; glasses and dishes come out greasy or with visible soil.
Detergent Dosing Fault
E11
Rinse aid is not being dispensed, glasses show water spots and streaks, and E11 is displayed.
Rinse Aid Dosing Fault
E12
Machine shows E12 and may stop; often associated with very hot or very cold readings on the display that do not match actual water temperature.
Temperature Sensor (NTC) Fault
E13
Display shows E13; machine may not start or may stop unexpectedly, sometimes after a power disturbance.
Control Board Communication / Internal Error
E14
Machine displays E14 and may not accept new program selections; keypad or touch buttons are unresponsive or behave erratically.
User Interface / Keypad Fault
E15
E15 is displayed and the machine may stop; often associated with low rinse pressure or poor final rinse coverage.
Rinse Pressure / Flow Fault
E16
Machine shows E16 and may stop; often occurs when the machine overheats or runs with insufficient water.
Overtemperature / Safety Thermostat Trip
E17
Display shows E17; machine may not start or may stop when a safety device is triggered (e.g., overflow tray switch).
Leakage / Base Tray Float Switch Activation
E18
Machine displays E18 and may not accept new cycles; often related to configuration or parameter errors after service.
Configuration / Parameter Error
Symptom
Condensation and steam escaping heavily from around the door or hood during operation, no error code.
Steam Leakage / Poor Door Seal
Symptom
Cycle takes much longer than normal, machine seems to be stuck heating or rinsing without any error code.
Extended Cycle Time
Symptom
Dishes not coming clean, heavy soil remains on plates and glasses after a full cycle, no error code displayed.
Poor Wash Performance
Symptom
Display is very dim or unreadable, but machine still runs cycles.
Display Backlight / LCD Degradation
Symptom
Door is difficult to open or close, or does not stay in position on hood-type machines, no error code.
Door / Hood Hinge and Spring Wear
Symptom
Excessive foam visible in the tank and possibly leaking from the door, no error code.
Foaming / Detergent Issue
Symptom
Glasses and cutlery come out with white film or chalky residue, especially in hard water areas, no error code.
Limescale / Hard Water Deposits on Ware
Symptom
Machine drains immediately after filling, never reaching proper water level, no error code.
Siphoning / Incorrect Drain Installation
Symptom
Machine fills and heats but does not drain at end of cycle; water remains in tank without any error code.
Partial Drain Failure
Symptom
Machine frequently trips the electrical breaker or RCD during operation, no specific error code.
Electrical Short or Earth Leakage
Symptom
Machine is very noisy during wash, with grinding or rattling sounds from inside the cabinet.
Mechanical Noise from Wash System
Symptom
Machine powers on but will not start a cycle when Start is pressed; no error code shown.
Start Inhibit / Interlock Condition
Symptom
Machine vibrates excessively or moves on the floor during operation, no error code.
Excessive Vibration / Unstable Installation
Symptom
Machine will not start, no lights or display even though power is available at the wall.
No Power / Dead Appliance
Symptom
Rinse arms do not rotate properly; dishes at the top or bottom rack are not rinsed well, no error code.
Rinse Spray Arm Obstruction
Symptom
Strong unpleasant odor from inside the dishwasher, especially when opening the door after idle periods.
Odor / Biofilm Build-Up
Symptom
Visible rust spots on interior surfaces or racks, no error code.
Corrosion / Rust Formation
Symptom
Wash arms do not rotate; heavy soil remains on dishes despite hot water, no error code.
Wash Spray Arm Obstruction or Low Circulation
Symptom
Water leaking from the back or sides of the machine, puddles forming under or behind the dishwasher.
Internal Hose or Component Leak
Symptom
Water leaking from under the front door during wash or rinse, no error code displayed.
Door Seal / Splash Leak
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Machine will not start cycle, display shows E01 immediately after power-on or when Start is pressed.
|
Main Water Inlet Fault | View Details |
| E02 |
Dishwasher does not fill with water, cycle aborts shortly after start and E02 is displayed.
|
Insufficient Water Level / Fill Timeout | View Details |
| E03 |
Machine does not drain, water remains in tank or sump and E03 is shown on the display.
|
Drain Pump or Drainage Fault | View Details |
| E04 |
Dishwasher stops mid-cycle, water is not heating and E04 appears on the display.
|
Wash Tank Heating Fault | View Details |
| E05 |
Rinse water does not reach target temperature, dishes are not hot at end of cycle and E05 is displayed.
|
Booster / Rinse Tank Heating Fault | View Details |
| E06 |
Machine stops and displays E06, often accompanied by unusually high water level in the tank or water leaking into the wash chamber when idle.
|
Water Level / Overflow Fault | View Details |
| E07 |
Display shows E07 and the machine may stop shortly after starting the wash phase; wash pump may not run or may cut out.
|
Wash Pump Motor Fault | View Details |
| E08 |
Machine displays E08 and may not start; door or hood appears closed but cycle will not run.
|
Door / Hood Interlock Fault | View Details |
| E09 |
E09 appears and the machine may stop during rinse; rinse pump may not operate or runs intermittently.
|
Rinse Pump Fault | View Details |
| E10 |
Display shows E10 and detergent is not being dosed correctly; glasses and dishes come out greasy or with visible soil.
|
Detergent Dosing Fault | View Details |
| E11 |
Rinse aid is not being dispensed, glasses show water spots and streaks, and E11 is displayed.
|
Rinse Aid Dosing Fault | View Details |
| E12 |
Machine shows E12 and may stop; often associated with very hot or very cold readings on the display that do not match actual water temperature.
|
Temperature Sensor (NTC) Fault | View Details |
| E13 |
Display shows E13; machine may not start or may stop unexpectedly, sometimes after a power disturbance.
|
Control Board Communication / Internal Error | View Details |
| E14 |
Machine displays E14 and may not accept new program selections; keypad or touch buttons are unresponsive or behave erratically.
|
User Interface / Keypad Fault | View Details |
| E15 |
E15 is displayed and the machine may stop; often associated with low rinse pressure or poor final rinse coverage.
|
Rinse Pressure / Flow Fault | View Details |
| E16 |
Machine shows E16 and may stop; often occurs when the machine overheats or runs with insufficient water.
|
Overtemperature / Safety Thermostat Trip | View Details |
| E17 |
Display shows E17; machine may not start or may stop when a safety device is triggered (e.g., overflow tray switch).
|
Leakage / Base Tray Float Switch Activation | View Details |
| E18 |
Machine displays E18 and may not accept new cycles; often related to configuration or parameter errors after service.
|
Configuration / Parameter Error | View Details |
| – |
Condensation and steam escaping heavily from around the door or hood during operation, no error code.
|
Steam Leakage / Poor Door Seal | View Details |
| – |
Cycle takes much longer than normal, machine seems to be stuck heating or rinsing without any error code.
|
Extended Cycle Time | View Details |
| – |
Dishes not coming clean, heavy soil remains on plates and glasses after a full cycle, no error code displayed.
|
Poor Wash Performance | View Details |
| – |
Display is very dim or unreadable, but machine still runs cycles.
|
Display Backlight / LCD Degradation | View Details |
| – |
Door is difficult to open or close, or does not stay in position on hood-type machines, no error code.
|
Door / Hood Hinge and Spring Wear | View Details |
| – |
Excessive foam visible in the tank and possibly leaking from the door, no error code.
|
Foaming / Detergent Issue | View Details |
| – |
Glasses and cutlery come out with white film or chalky residue, especially in hard water areas, no error code.
|
Limescale / Hard Water Deposits on Ware | View Details |
| – |
Machine drains immediately after filling, never reaching proper water level, no error code.
|
Siphoning / Incorrect Drain Installation | View Details |
| – |
Machine fills and heats but does not drain at end of cycle; water remains in tank without any error code.
|
Partial Drain Failure | View Details |
| – |
Machine frequently trips the electrical breaker or RCD during operation, no specific error code.
|
Electrical Short or Earth Leakage | View Details |
| – |
Machine is very noisy during wash, with grinding or rattling sounds from inside the cabinet.
|
Mechanical Noise from Wash System | View Details |
| – |
Machine powers on but will not start a cycle when Start is pressed; no error code shown.
|
Start Inhibit / Interlock Condition | View Details |
| – |
Machine vibrates excessively or moves on the floor during operation, no error code.
|
Excessive Vibration / Unstable Installation | View Details |
| – |
Machine will not start, no lights or display even though power is available at the wall.
|
No Power / Dead Appliance | View Details |
| – |
Rinse arms do not rotate properly; dishes at the top or bottom rack are not rinsed well, no error code.
|
Rinse Spray Arm Obstruction | View Details |
| – |
Strong unpleasant odor from inside the dishwasher, especially when opening the door after idle periods.
|
Odor / Biofilm Build-Up | View Details |
| – |
Visible rust spots on interior surfaces or racks, no error code.
|
Corrosion / Rust Formation | View Details |
| – |
Wash arms do not rotate; heavy soil remains on dishes despite hot water, no error code.
|
Wash Spray Arm Obstruction or Low Circulation | View Details |
| – |
Water leaking from the back or sides of the machine, puddles forming under or behind the dishwasher.
|
Internal Hose or Component Leak | View Details |
| – |
Water leaking from under the front door during wash or rinse, no error code displayed.
|
Door Seal / Splash Leak | View Details |
No matching codes found
Advertisements