Etna
Etna Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Oven will not heat in any mode, display and oven light work normally
Main Heating Circuit Failure
E02
Oven overheats, temperature rises far above the set value, sometimes burning food
Temperature Regulation Failure
E03
Oven does not reach set temperature, long preheat times, food undercooked
Insufficient Heating / Sensor Drift
E04
Display shows error shortly after start, oven does not heat, fan may run briefly
Oven Temperature Sensor Open Circuit
E05
Display shows error, oven will not start, fan may run, cavity remains cold
Oven Temperature Sensor Short Circuit
E06
Display and buttons dead, oven light may still work, or only clock flashes with error
User Interface / Control Panel Communication Error
E07
Cooling fan runs continuously or not at all, oven may shut down with error during use
Cooling Fan Circuit Fault
E08
Convection (hot air) fan does not run in fan‑assisted modes, uneven baking, error may appear
Convection Fan Motor Failure
E09
Grill function not working, top element does not glow red, other modes may work
Grill Heating Circuit Failure
E10
Oven light not working, all other functions normal
Oven Cavity Lamp Circuit Fault
E11
Door lock symbol flashing, oven will not start, or door remains locked after pyrolytic cleaning (on self‑clean models)
Door Lock Mechanism / Switch Fault
E12
Clock/timer cannot be set, oven will not start cooking, error appears when pressing start
Timer / Clock Configuration Error
E13
Error appears when selecting a specific function (e.g., fan grill or bottom heat), oven will not start that mode
Function Selector / Mode Circuit Fault
E14
Display shows error and oven shuts down during long cooking, exterior of cabinet feels very hot
Overtemperature Safety Cut‑Out
E15
Error appears immediately after power‑on, no functions available
Main PCB Power Supply Fault
E16
Touch controls unresponsive or erratic, error displayed related to keypad
Touch Panel / Keypad Fault
E17
Child lock symbol displayed, controls do not respond, may be interpreted as an error
Child Lock / Control Lock Activated
E18
Steam‑assist or steam cleaning function fails, error displayed on steam models
Steam Generator / Water System Fault
E19
Pyrolytic self‑clean cycle will not start, error displayed on pyrolytic models
Pyrolytic System Safety Fault
E20
Fan runs but no heat in fan‑assisted mode, other modes may heat normally
Convection Heating Element Failure
Symptom
Clock loses time or resets to 00:00 after each power interruption
Clock Backup / Power Supply Issue
Symptom
Control knobs become very hot to touch during use
Insufficient Cooling / Heat Migration to Control Panel
Symptom
Display very dim or segments missing, but oven still operates
Display Module Degradation
Symptom
Oven door glass is loose, rattling, or inner glass panel cracked
Door Glass Assembly Damage
Symptom
Oven door will not close fully, heat escapes, poor temperature control
Door Hinge / Door Alignment Fault
Symptom
Oven door will not open after cooking (non‑pyrolytic model), no error code
Mechanical Door Latch Jam
Symptom
Oven emits burning smell or smoke during normal cooking (not first use or self‑clean)
Overheating / Contamination on Elements
Symptom
Oven interior enamel is cracked or flaking, rust spots visible
Cavity Enamel Degradation
Symptom
Oven interior light stays on all the time, even when door is closed and oven is off
Door Switch / Lamp Control Fault
Symptom
Oven leaks steam or moisture from door area, condensation on control panel
Door Seal / Ventilation Issue
Symptom
Oven light, fan, and display work but food takes much longer to cook than before
Partial Heating / Single Element Failure
Symptom
Oven makes loud rattling or grinding noise when fan is running
Fan Noise / Bearing Wear
Symptom
Oven not heating at all, no error code displayed, fan and light may work
Complete Heating Loss Without Error
Symptom
Oven temperature fluctuates widely, food sometimes burns and sometimes undercooks in same setting
Unstable Temperature Control
Symptom
Oven trips household circuit breaker or RCD when heating is started
Earth Leakage / Short Circuit in Heating Circuit
Symptom
Oven will not start; display works but pressing start does nothing, no error code
Start Circuit / Safety Interlock Issue
Symptom
Strong electrical or plastic smell from new Etna oven during first few uses
Initial Burn‑In Odor
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Oven will not heat in any mode, display and oven light work normally
|
Main Heating Circuit Failure | View Details |
| E02 |
Oven overheats, temperature rises far above the set value, sometimes burning food
|
Temperature Regulation Failure | View Details |
| E03 |
Oven does not reach set temperature, long preheat times, food undercooked
|
Insufficient Heating / Sensor Drift | View Details |
| E04 |
Display shows error shortly after start, oven does not heat, fan may run briefly
|
Oven Temperature Sensor Open Circuit | View Details |
| E05 |
Display shows error, oven will not start, fan may run, cavity remains cold
|
Oven Temperature Sensor Short Circuit | View Details |
| E06 |
Display and buttons dead, oven light may still work, or only clock flashes with error
|
User Interface / Control Panel Communication Error | View Details |
| E07 |
Cooling fan runs continuously or not at all, oven may shut down with error during use
|
Cooling Fan Circuit Fault | View Details |
| E08 |
Convection (hot air) fan does not run in fan‑assisted modes, uneven baking, error may appear
|
Convection Fan Motor Failure | View Details |
| E09 |
Grill function not working, top element does not glow red, other modes may work
|
Grill Heating Circuit Failure | View Details |
| E10 |
Oven light not working, all other functions normal
|
Oven Cavity Lamp Circuit Fault | View Details |
| E11 |
Door lock symbol flashing, oven will not start, or door remains locked after pyrolytic cleaning (on self‑clean models)
|
Door Lock Mechanism / Switch Fault | View Details |
| E12 |
Clock/timer cannot be set, oven will not start cooking, error appears when pressing start
|
Timer / Clock Configuration Error | View Details |
| E13 |
Error appears when selecting a specific function (e.g., fan grill or bottom heat), oven will not start that mode
|
Function Selector / Mode Circuit Fault | View Details |
| E14 |
Display shows error and oven shuts down during long cooking, exterior of cabinet feels very hot
|
Overtemperature Safety Cut‑Out | View Details |
| E15 |
Error appears immediately after power‑on, no functions available
|
Main PCB Power Supply Fault | View Details |
| E16 |
Touch controls unresponsive or erratic, error displayed related to keypad
|
Touch Panel / Keypad Fault | View Details |
| E17 |
Child lock symbol displayed, controls do not respond, may be interpreted as an error
|
Child Lock / Control Lock Activated | View Details |
| E18 |
Steam‑assist or steam cleaning function fails, error displayed on steam models
|
Steam Generator / Water System Fault | View Details |
| E19 |
Pyrolytic self‑clean cycle will not start, error displayed on pyrolytic models
|
Pyrolytic System Safety Fault | View Details |
| E20 |
Fan runs but no heat in fan‑assisted mode, other modes may heat normally
|
Convection Heating Element Failure | View Details |
| – |
Clock loses time or resets to 00:00 after each power interruption
|
Clock Backup / Power Supply Issue | View Details |
| – |
Control knobs become very hot to touch during use
|
Insufficient Cooling / Heat Migration to Control Panel | View Details |
| – |
Display very dim or segments missing, but oven still operates
|
Display Module Degradation | View Details |
| – |
Oven door glass is loose, rattling, or inner glass panel cracked
|
Door Glass Assembly Damage | View Details |
| – |
Oven door will not close fully, heat escapes, poor temperature control
|
Door Hinge / Door Alignment Fault | View Details |
| – |
Oven door will not open after cooking (non‑pyrolytic model), no error code
|
Mechanical Door Latch Jam | View Details |
| – |
Oven emits burning smell or smoke during normal cooking (not first use or self‑clean)
|
Overheating / Contamination on Elements | View Details |
| – |
Oven interior enamel is cracked or flaking, rust spots visible
|
Cavity Enamel Degradation | View Details |
| – |
Oven interior light stays on all the time, even when door is closed and oven is off
|
Door Switch / Lamp Control Fault | View Details |
| – |
Oven leaks steam or moisture from door area, condensation on control panel
|
Door Seal / Ventilation Issue | View Details |
| – |
Oven light, fan, and display work but food takes much longer to cook than before
|
Partial Heating / Single Element Failure | View Details |
| – |
Oven makes loud rattling or grinding noise when fan is running
|
Fan Noise / Bearing Wear | View Details |
| – |
Oven not heating at all, no error code displayed, fan and light may work
|
Complete Heating Loss Without Error | View Details |
| – |
Oven temperature fluctuates widely, food sometimes burns and sometimes undercooks in same setting
|
Unstable Temperature Control | View Details |
| – |
Oven trips household circuit breaker or RCD when heating is started
|
Earth Leakage / Short Circuit in Heating Circuit | View Details |
| – |
Oven will not start; display works but pressing start does nothing, no error code
|
Start Circuit / Safety Interlock Issue | View Details |
| – |
Strong electrical or plastic smell from new Etna oven during first few uses
|
Initial Burn‑In Odor | View Details |
No matching codes found
Advertisements